PYLE Audio Automobile Accessories PLD22 User Manual

OWNER’S MANUAL  
DIGITAL AUDIO OUT  
MULTI-SUBTITLE LANGUAGES FUNCTION  
ELECTRONIC SHOCKPROOF (ESP) FUNCTION  
A/V INPUT  
REMOTE CONTROL  
 
Safety Information  
CAUTION:  
DISC NOTES  
Discs Note:  
This mobile DVD player is a class 1 laser  
product. However this mobile DVD player  
uses a visible/invisible laser beam which  
could cause hazardous radiation  
exposure if directed. Be sure to operate  
the mobile DVD player correctly as  
instructed.  
You can playback the following discs-  
12CM on the receiver:  
DVD VIDEO/DVD AUDIO  
VIDEO CD/AUDIO CD  
MP3/WMA/JPEG/MPEG4  
Handling and Cleaning  
Use of controls or adjustments or  
performance of procedures other than  
those specified herein may result in  
hazardous radiation exposure.  
Do not open covers and do not repair  
yourself. Refer servicing to qualified  
personnel.  
- Dirt, dust, scratches and warping discs  
will prevent proper operation.  
- Do not place stickers or make scratches  
on discs.  
- Do not warp discs.  
- A disc should always be kept in its case  
when not in use to prevent from damage.  
- Do not place discs in the following  
places:  
WARNING:  
- To reduce the risk of fire or electric  
shock, do not expose this equipment to  
rain or moisture.  
- To reduce the risk of fire or electric  
shock, and annoying interference, use  
only the recommended accessories.  
- This device is intended for continuous  
operation.  
This product incorporates copyright  
protection technology that is protected by  
method claims of certain U.S. patents  
and other intellectual property rights  
owned by Macro vision Corporation and  
other rights owners. Use of this copyright  
protection technology must be  
authorized by Macro vision Corporation,  
and is intended for home and other  
limited viewing uses only unless  
otherwise authorized by Macro vision  
Corporation. Reverse engineering or  
disassembly is prohibited.  
1.Direct sunlight.  
2.Dirty, dusty and damp areas.  
3.Near car heaters.  
4.On the seats or dashboard.  
Disc Cleaning  
Use a dry soft cloth to wipe the surface.  
If the disc is quite dirty, use a soft cloth  
slightly moistened with isopropyl  
(rubbing) alcohol. Never use solvents  
such as benzene, thinner or conventional  
record cleaners as they may mar the  
surface of the disc.  
Region Management Information  
This mobile DVD Player is designed and  
manufactured to respond to the Region  
Management Information that is recorded  
on a DVD disc. If the Region number  
described on the DVD disc does not  
correspond to the Region number of this  
Mobile DVD Player, this Mobile DVD  
Player cannot play this disc.  
User’s Manual - page 2  
 
Label side  
up  
Installation  
Notes:  
- Choose the mounting location where the unit  
will not distract the driver.  
Do not touch  
the underside  
of the disc  
- Before the installing of the unit, connect the  
wiring temporarily and make sure it is all  
connected up properly and the unit and the  
system works.  
Do not  
bend  
- Use only the parts included with the unit to  
ensure proper installation. The use of  
unauthorized parts can cause malfunctions.  
- Consult with your nearest dealer if  
installation requires the drilling of holes or  
other modifications of the vehicle.  
- Install the unit where it does not get in the  
driver's way and cannot injure the passenger if  
there is a sudden stop, like an emergency  
stop.  
Wipe the disc from  
center toward the  
outside edge  
Preparing New Discs with Rough Spots  
A new disc may have rough edges on its  
inside and outside edges. If a disc with  
rough edges is used, the proper setting  
will not be performed and the player will  
not play the disc. Therefore, remove the  
rough edges in advance by using a  
ballpoint pen or pencil as shown on the  
right. To remove the rough edges, press  
the side of the pen or pencil against the  
inside and outside edges of the disc.  
- If installation angel exceeds 30°from  
horizontal, the unit may not perform properly.  
Rough spots  
on  
outside edge  
- Avoid installing the unit where it will be  
subject to high temperature, such as from  
direct sunlight, or from hot air, from the  
heater, or where it would be subject to  
dust, dirt or excessive vibration.  
Ball point pen  
or pencil  
Rough spots  
edge  
on inside  
User’s Manual - page 3  
 
The unit is designed for home-use and car-use. When installed on the car, please  
follow the installation instruction below.  
Notes:  
1. First remove the two screws that lock the DVD mechanism, then attach the  
brackets on both sides of unit with screws (m4X5), last install the unit with  
screws (m5X25).  
2. When fix the unit, you can slide the screw (m5X25) to left side or right side to  
meet your needed position. In the figure above, select two holes among  
position that marked 1, 2, 3 and 4 to fix the bracket.  
User’s Manual - page 4  
 
ELECTRIC CONNECTION  
METHOD A  
Use the conversion cable to obtain DC 12V power supply input through the AC/DC  
ADAPTER or the cigarette lighter according to the illustrator as follows:  
METHOD B  
According to the illustrator below, install the unit in the car and obtain DC 12V power  
supply input.  
MEMORY/BATTERY (B+) (YELLOW)  
GROUND (B-) (BLACK)  
IGNITION SWITCH (ACC+) (RED)  
IR Sensor  
If you need to mount the DVD player in a location which is inaccessible, or where the line-of-  
sight between the remote control and the face of the player is interrupted, connect the remote  
sensor as shown in the diagram above.  
Mount the IR Sensor in a convenient location which is in direct line-of-sight with the use  
location of the remote control. Point the remote control at the sensor to operate the player.  
User’s Manual - page 5  
 
OPERATION  
LOCATION AND FUNCTION OF KEYS  
Front panel  
Remote Control  
User’s Manual - page 6  
 
1.  
Press it to turn the unit on/off.  
2.  
POWER  
19. SETUP  
Press the button to enter into the system  
setting menu.  
Pause playback a disc, press it again to  
resume playback.  
20. TITLE/PBC  
In DVD or VCD (PBC mode is on) mode,  
press TITLE/PBC button to display the TITLE  
menu that is stored in disc.  
21. 0~9  
3.MODE  
Change between DVD, TV and AV mode.  
4.  
Numeric buttons.  
Press the button to skip back one track.  
5.  
22. AUDIO  
On multi-audio sound track disc, press to  
change the AUDIO sound track.  
23. SUB-T  
Press the button to skip to the next track.  
6. EJECT  
Press it to eject the disc from the disc slot (7).  
7. DISC Slot  
Change the subtitle language on multi-subtitle  
language DVD disc.  
Gently insert a disc with the printed side  
uppermost into the disc slot (7) until you feel  
some resistance.  
24. MUTE  
Press it to mute the sound, press it again will  
resume the sound.  
8. AV IN terminals  
25. ANGLE  
Connect peripheral audio/video system to  
the unit through the AV IN terminals.  
9. USB port  
Change the view angle on multi-angle DVD  
disc.  
26. VOL+/VOL-  
You can connect an USB driver through this  
port.  
Press the VOL+ to increase the volume level.  
Press the VOL- to decrease the volume level.  
27. MENU  
10. SD/MMC card slot  
You can insert SD/MMC card into the slot.  
11. IR  
In DVD or VCD (PBC mode is on) mode, press  
the button to display the TITLE menu that is  
stored in disc.  
Point the remote control handset to the  
Remote Control Sensor IR (11). Press the  
function keys on the handset to control the  
system.  
28.  
Press the button to search forward rapidly.  
29.  
12. RESET  
Press the button to search reverse rapidly.  
30. GOTO  
Press RESET button (12) to restores the  
default setting.  
Press the button to select th bookmark that  
you set.  
13. DISP  
Display statistical disc information during  
playback.  
31.  
STOP  
Press it for the first time to pre-stop playback,  
press it again to stop playback.  
32. PROG  
14. A-B  
A-B repeat allows a passage to be repeated  
continuously.  
Press the button to play the track orderly by  
what you programmed.  
15. RPT  
Switch the repeat mode of discs.  
16. ZOOM  
33. RDM  
Press the button to play all tracks o n disc  
randomly. Press again to cancel the function.  
Press the button to change the scaling.  
17.  
In some menus,  
,
buttons served as  
cursor buttons to move to up/down, left/right.  
18. ENTER  
Confirm the Track/Chapter selected with  
the numeric buttons or selected with the  
cursor buttons on TV screen.  
User’s Manual - page 7  
 
USING THE REMOTE CONTROL  
Preparing and Using The Remote  
Control  
2. Replacing the battery  
Replace the battery with the same type  
and the (+) side facing up.  
* Before using the remote control,  
please take the transparent insulator  
strip off the bottom of remote control.  
* Point the remote control at the remote  
sensor (11) from no more than 6 feet  
away.  
* If the IR sensor is exposed to direct  
sunlight, the remote control may not be  
able to communicate with it properly.  
You may need to relocate or shield the  
IR sensor.  
* If you are more than 300 away from  
being directly in front of the IR sensor,  
the remote control may be unable to  
communicate properly.  
* The remote control is small,  
lightweight precision device. To avoid  
damage, short battery life, operational  
erros and poor response, observe the  
following:  
3. Closing the cover  
Gently push in the holder until securely  
locked into place.  
-Do not subject the remote control to  
excessive shock.  
-Do not put in a pocket.  
-Keep away from food, moisture and  
dirt.  
-Do not place in direct sunshine.  
Battery replacement  
The remote control uses a lithium button  
type battery, model CR 2025 3V. Do not  
use any other kind of battery in the  
remote. Follow these instructions when  
installing or replace the battery.  
1. Remove the battery holder by  
pressing the locking tab with your thumb  
B
A
User’s Manual - page 8  
 
GENERAL OPERATION  
Last Position Memory Feature  
- During disc playback, if you press  
button (1) to turn off the unit and then  
press the button again to turn on the unit,  
the DVD unit will resume playing from the  
point that it was interrupted.  
-During disc playback, if you press the  
MODE button (3) to switch to other mode,  
and then return to DVD mode again, the  
unit will resume playing from the point  
that it was interrupted.  
Initial System Start-Up  
Be sure to press the RESET button ( 12)  
When using the unit for the first time,  
after all connections are completed  
correctly.  
1. Turn off the unit power.  
2. Press RESET with a ballpoint pen or  
similar pointed object.  
Turning Power On and Off  
Press  
turn on the unit.  
When system is on, press button (1) to  
turn off the unit.  
button (1) or insert a disc to  
Reset Function  
RESET button on the housing must be  
activated with either a ballpoint pen or  
thin metal object. The RESET button (12)  
is to be activated at the following times:  
-After initial installation of the unit when  
all wiring is completed.  
-Some of the function buttons do not  
operate.  
- Error symbol appears on the display.  
Note:  
Loading/Removing a Disc  
1. Insert the disc into the disc slot (7)  
with the printed side facing up. The  
player will play the disc automatically.  
2. Whenever press button (6) to eject  
the disc.  
If the unit still does not function after you  
have pressed RESET, try cleaning the  
connectors which link the panel and the  
main housing with a cotton swab  
moistened with isopropyl (rubbing  
alcohol). If it still does not work, bring the  
unit to your dealer for servicing or advice.  
Adjusting the volume level  
Press VOL+/VOL- button (26) to adjust  
the volume level.  
Input Source Select  
Press MODE button (3) to switch to the  
desired input source.  
The mode will change each time the  
button is pressed.  
.
DVD AV  
ESP Function  
This unit features ESP (anti-shock)  
protection. It works by “playing ahead”  
and buffering the stored part of the  
program, playing it back when the  
realtime portion of the program has been  
disrupted. Depending on the  
listening/viewing mode you are in, the  
amount of time of disruption which can be  
hidden is as follows:  
CD, VCD: 18 seconds  
MP3:160 seconds  
DVD: 6 seconds  
MPEG4: 20 seconds  
User’s Manual - page 9  
 
Pause Playback  
Press button (2) to pause playback.  
Press it again to resume playback.  
CD/MP3 Operation  
Playback  
1. Insert a disc with the label side facing  
up. The disc will be drawn into the player  
automatically. The information for the  
current disc will be shown on the screen .  
2. For CD:  
Stopping playback  
- Briefly press the < button (31) to stop  
the playback. When the < button is  
pressed and then press button (20),  
normal playback will resume.  
- Press < button (31) twice and then  
press button to stop the playback and  
go back to first track.  
Fast-Forward / Fast-Reverse  
1. Fast-Forward  
Press 8 button (28) during playback.  
Each time the button is pressed, the  
speed of fast-forward increases as  
follows:  
3. For MP3:  
FORWARD 2XÆ 4XÆ 8XÆ 20X  
In fast-forward state, press button (2)  
to return to normal playback.  
2. Fast-Reverse  
Press 7 button (29) during playback.  
Each time the button is pressed, the  
speed of fast-reverse increases as  
follows:  
BACKWARD 2XÆ 4XÆ 8XÆ 20X  
In fast-reverse state, press button (2)  
to return to normal playback.  
1). Press /► button to move between  
work area A, B and C.  
Repeat Play/ Paragraph Repeat Play  
- Repeat play:  
Use this function when you wish to repeat  
a whole disc, a track or a directory in the  
disc.  
1) Press RPT button (15) repeatedly to  
select different repeat modes.  
2) For different types of discs, pressing  
RPT button (15) has different effects.  
For CD:  
2). Press ▲/▼ button or input relative  
numeric button to select the desired  
folder or file of this work area.  
3). Press ENTER button (18) to confirm  
the selected item.  
4. Return to the beginning of the previous  
track (file) by pressing the 9 button (4).  
5. Advance to the beginning of the next  
track (file) by pressing the : button (5).  
REP 1 REP ALL REP OFF  
For MP3:  
REP 1 REP DIR  
OFF  
REP ALL REP  
User’s Manual - page 10  
 
Note:  
REP 1: Only a track (file) is played  
repeatedly.  
REP DIR: Only tracks (files) in a folder  
are repeatedly playing.  
REP ALL: An entire disc is played  
repeatedly.  
DVD/VCD Operation  
Playback with PBC Menu  
Some VCD or SVCD discs contain a  
simplified menu to assist in selection of  
tracks. To view this menu requires a  
system called Playback Control (PBC).  
PBC creates this disc directory “on-the-  
fly” if PBC has been enabled. To turn PBC  
On, press the PBC button (20). (Please  
note that PBC does not accommodate the  
following features: REPEAT, RANDOM,  
A-B, PROGRAM and GO TO).  
REP OFF: The mode returns to normal  
playback.  
- Paragraph Repeat Play:  
A-B repeat allows a selected passage to  
be repeat continuously.  
Press A-B button (14) at the start of the  
desired passage.  
Playback With Menu  
If the DVD disc or VCD/SVCD discs has a  
menu system, and the PBC (playback  
Control) setting is on, you can display the  
menu which allow you to select the  
program to playback by pressing PBC  
button (20).  
Press A-B button (14) at the end of the  
passage.  
Then the unit will repeat playing the  
passage you just set from A to B.  
To return to normal playback, press A-B  
Button again.  
1. Move the cursor buttons (  
highlight the item you wish to select.  
,
) to  
2. Press ENTER (18) to select this item.  
Some discs offer a series of menus which  
with a wide variety of choices. You can  
continue to navigate the menu further  
using a combination of the cursor buttons  
Playing In Random Sequence  
Press RDM button (33) to switch the  
random mode on/off. In this mode, tracks  
(files) on the disc will be played in a  
random sequence.  
(
,
) and the ENTER button (18).  
Pausing playback  
To pause playback, press  
(2). Press  
again to resume playback. Please note  
that when playback is resumed, there  
may be a short delay in either the image  
or sound. This is normal.  
Stopping playback  
Briefly press the button (31) to stop the  
Unit playback. When the  
pressed and then press  
button is  
button (2),  
resume to the normal playback.  
Press button (31) twice and then press  
(20) to stop playback and go back to  
the first track/chapter.  
User’s Manual - page 11  
 
Fast-Forward / Fast-Reverse  
1. Fast-forward  
Press8button (28) during playback.  
Each time the button is pressed, the  
speed of fast-forward increases as  
follows:  
2) For different types of discs, pressing  
RPT button (15) has different effects.  
For DVD:  
REP CHAPTER REP TITLE REP  
OFF  
For VCD/SVCD:  
FORWARD 2XÆ 4XÆ 8XÆ 20X  
REP 1 REP ALL REP OFF  
In fast-forward mode, press  
to return to normal playback.  
2. Fast-Reverse  
button (2)  
NOTES:  
REP 1: Only a track (file) is played  
repeatedly.  
Press 7 button (29) during playback.  
Each time the button is pressed, the  
speed of fast-reverse increases as  
follows:  
REP CHAPTER: A chapter is played  
repeatedly.  
REP TITLE: A title is played repeatedly.  
REP ALL: an entire disc is played  
repeatedly.  
REP OFF: The mode returns to normal  
playback.  
BACKWARD 2XÆ 4XÆ 8XÆ 20X  
* Repeat feature does not support VCD  
2.0 (PBC is on).  
In fast-reverse mode, press  
to return to normal playback.  
button (2)  
-Paragraph Repeat Play:  
Use this function when you wish to repeat  
play a desired paragraph. A-B repeat  
allows a passage to be repeated  
continuously.  
Finding the Beginning of Chapters or  
Tracks (Files)  
Use this function to easily move to the  
beginning of the chapters or tracks (files)  
on the disc.  
Press A-B button (14) at the start of the  
desired passage.  
During playback, each time press the :  
button (5) or 9 button (4) to skip and  
playback the chapter/track.  
: :Press the button to start playback  
From the beginning of the following  
chapter or track (file).  
9 :Press the button to start playback  
from the beginning of the previous  
chapter or track (file).  
Press A-B button (14) at the end of the  
passage.  
Then the unit will repeat playing the  
passage you just set from A to B.  
To return to normal playback, press A-B  
button again.  
Note:  
1. Some DVDs do not have chapters.  
2. For some VCD2.0 discs (PBC control),  
:/9 or 8/7 buttons may be  
unavailable.  
Searching Directly by Chapter or Track  
Number  
Use this function to easily move to the  
beginning of the chapters or tracks (files)  
on the disc.  
Please note: This operation can only be  
controlled from remote control unit.  
1. During playback, pre-stop or pause,  
input the chapter or track number you  
want to using the numeric keypad( “0” to  
9”).  
Repeat Play/ Paragraph Repeat Play  
- Repeat play:  
Use this function when you wish to repeat  
an entire disc, a track or a chapter in the  
disc.  
1) Press RPT button (15) repeatedly to  
select different repeat modes.  
User’s Manual - page 12  
 
2. Waiting for a moment for the player  
locate the track.  
Playback starts from the selected  
chapter or track.  
7)C:  
Displays the total playback time for the  
current chapter.  
8)  
* This function is only available for discs  
on which chapter numbers are recorded.  
Displays the current disc language, audio  
type, subtitle language and play angle.  
For VCD:  
Playing In Random Order  
Press RDM button (33) to switch the  
random mode on/off. If the random mode  
is on, tracks (files) on the disc will be  
played in a random order.  
On Screen Display Function  
Press the DISP button (13) on the remote  
control during playback to display on-  
screen information about the current  
disc.  
GOTO Function  
The GO TO function allows you to select  
a specific place in the program where you  
want to begin playback. The function is  
displayed slightly differently between  
DVD and VCD modes.  
For DVD:  
Pressing and holding DISP button (13) on  
the remote control to display information  
in the following manner.  
Press GOTO button (30), the screen will  
display the following message:  
FOR DVD:  
Use the number keys (21) to input the  
Track and Time then press ENTER button  
(18) to confirm.  
ZOOM Function  
1) TT  
Displays the current title number and  
total title number.  
2) CH  
Press ZOOM button (24) to increase or  
decrease the size of the image. Please  
note that the ZOOM function is only  
available on discs which support it.  
Displays the current chapter number and  
total chapter numbers.  
3)  
Displays the playing time for the entire  
disc.  
4)C-:  
In zoom mode, press  
,
buttons  
(16) to move pictures up/down/left/right  
direction in order to find the area of the  
picture that you want to zoom into.  
Displays the remaining playback time for  
the current chapter.  
5)T:  
Displays the total playback time for the  
current title.  
6)T-:  
Displays the remaining playback time for  
the current title.  
User’s Manual - page 13  
Multi-subtitle Language Function  
Some DVDs have multiple subtitle  
languages. The subtitle language can be  
changed or subtitles hidden during  
playback.  
 
Press the SUB-T button (23) during  
playback. The following information will  
be shown on the screen.  
- Some discs only contain one  
soundtrack language.  
- Not all discs will allow changing the  
subtitle during playback. In these cases,  
select subtitle from the DVD’s menu.  
Each time you press the button, the  
subtitle cycles between the different  
languages recorded on the disc.  
Notes:  
- Not all discs will allow changing the  
subtitle during playback. In these cases,  
select subtitle from the DVD’s menu.  
- There may be a delay before the  
selected subtitle appears.  
- For some discs, the subtitles will be  
displayed even when this is set to off.  
- The number of available languages  
have one subtitle language available.  
Multi-angle Function  
For DVD discs in which scenes have  
been filmed from multiple angles, the  
viewing angle can be switched during  
playback.  
Press ANGLE (25) during playback. The  
following information will be shown on  
the screen.  
ANGLE 1  
The angle setting cycles between the  
available viewing angles recorded on the  
disc each time the button is pressed.  
Notes:  
- The ANGLE function is only available  
for discs which support it and programs in  
have been recorded.  
Switching the Audio Tracks  
For some VCD/SVCD discs which have  
multiple audio tracks, you can change the  
audio track temporarily during playback.  
Each time you press the AUDIO button  
(22) during playback, the sound cycles  
between the audio tracks recorded on the  
disc.  
- Depending on the disc, the angle may  
switch in one of two ways.  
1. Seamless: The angle switches  
smoothly.  
CHANNEL  
CHANNEL  
CHANNEL  
[ STEREO]  
[MONO L]  
[MONO R]  
2. Non-seamless: When the angle is  
switched, a still picture is displayed first,  
after which the angle switches.  
- The angle number varies from disc to  
disc.  
Notes:  
- Some discs only contain one  
soundtrack language.  
Program Play Function  
Multi-audio Language Function  
For DVD discs which have multiple  
language soundtrack, you can change  
the language track temporarily during  
playback.  
- In VCD/CD playback mode, press  
PROG button (32) to activate program  
edit interface as follow:  
Each time you press the AUDIO button  
(22) during playback, the sound cycles  
between the audio tracks recorded on the  
disc.  
:
:
Notes:  
- The language number is different  
according to the disc.  
User’s Manual - page 14  
 
Use  
,
cursor button to select the  
The current disc has a “Parental Control”  
level, and the player’s parental level is  
set below the level of the disc. To view  
this disc, you should enter the correct  
password to play the disc normally.  
NOTE:  
For how to set the “Parental Control”  
level, please refer to “Parental Control”  
on page 18.  
item that you want to program.  
1) The item you selected will become  
highlighted.  
2) Input the track number that you want to  
program by numeric buttons (0~9) on the  
remote control.  
3) Press  
,
cursor buttons to  
move to “PLAY” operation button and  
then press ENTER button (18) to  
program the playback.  
Data Disc Play Operation  
- In DVD/MP3 playback mode, press  
PROG button (32) to activate program  
edit interface as follow:  
When you insert a data disc including  
audio (MP3), movie (MPEG) or picture  
(JPG) files into the disc slot, the following  
media play window will be shown on the  
screen:  
Use  
,
cursor button to select the  
item that you want to program.  
1) The item you selected will become  
highlighted.  
2) Input the track number that you want to  
program by numeric buttons (0~9) on the  
remote control.  
Work area A: folder list  
Work area B: files list  
Work area C:  
3) Press  
,
cursor buttons to  
move to “PLAY” operation button and  
then press ENTER button (18) to  
program the playback.  
(1): playback audio mode (default)  
(2): viewing picture mode  
(3): playback movie mode  
Work area D: file information display  
Frequently Asked Questions  
- I inserted a DVD disc, but it cannot be  
played. The message “REGION  
ERROR” is displayed.  
1. Press  
button to move between  
work area A, work area B and work area  
C.  
DVD players and discs all have “REGION  
CODES”. If the region code number on  
the DVD disc does not correspond to the  
region number of this DVD player, the  
unit cannot play the disc.  
- When I insert a DVD disc, there is a  
window shown on the screen that  
requires entering 4 characters  
2. Press  
button to select the desired  
folder or file of this work area.  
3. Press ENTER button (18) to confirm  
the selected item.  
4. In picture views or movie playback  
mode, if you want to return to the  
previous menu, press (STOP) button.  
password. why?  
User’s Manual - page 15  
 
Memory Card Play Operation  
- The main unit can only support the  
standard USB-memory disc which is  
approved by Microsoft.  
This disc player offers you a memory card  
slot (10).  
- USB MP3 player is not a standard  
which means different brand name or  
different models have their own standard.  
So our product cannot support every MP3  
player.  
Using the SD/MMC card:  
When you insert a SD/MMC card into the  
Memory card slot (10), the DVD player  
will read the SD/MMC card automatically.  
The unit gives first priority to the card in  
the slot. If you insert a disc into the disc  
slot (7) while reading the SD/MMC card,  
the unit will play the disc. Press (31)  
button to enter into PRE-STOP mode,  
then press GOTO button (30) to switch  
back to the reading card mode.  
- When connecting an MP3 player and  
there has normal battery in the player  
(non rechargeable battery), you should  
remove the battery from the MP3 player  
then connect it to the USB port.  
Otherwise, it may cause battery burst.  
Note:  
- When in USB play mode, be sure not to  
remove the USB device from the USB  
port.  
While reading the memory card, please  
don’t touch or take out the card. If the is  
unable to read the card, please check if  
the card is in good condition. You may  
also wish to try removing the card fully  
from the reader, and reinserting it again.  
AV IN Operation  
This disc player offers you the option of  
using the auxiliary front panel A/V input  
jack to connect a video game, digital  
camera/camcorder or other units you  
wish to use in your mobile video system.  
USB Device Operation  
This disc player offers you an USB  
interface (9). An USB device can be  
connected to this port.  
Using the USB device:  
When you insert a USB device into the  
USB interface (9), the DVD player will  
read the USB automatically.  
The unit will give priority to the latter. If  
insert a disc into the disc slot (7) or inset  
a SD/MMC card into the SD/MMC  
interface (10) while read the USB device,  
the unit will play the disc or the SD/MMC.  
YELLOW to VIDEO OUT  
RED to AUDIO Rch OUT  
WHITE to AUDIO Lch OUT  
Press (31) to enter into PRE-STOP  
mode, then press GOTO button (30) to  
switch to the reading USB mode.  
Note:  
When reading the USB device, please  
don’t touch or take out the card. If the is  
unable to read the device, please check if  
the device is in good condition. You may  
also wish to try removing the card fully  
from the port, and reinserting it again.  
User’s Manual - page 16  
 
About MP3  
Additional Information  
About Parental Control  
What is MP3?  
MP3, whose official name is “MPEG-1 Audio  
Layer 3,” is a compression standard  
DVD discs have a parental level assigned to  
the disc. The range of parental controls is  
from 1 to 8. In general, this range  
corresponds to established movie rating  
systems. Movie rating systems may vary  
depending on the country you live in.  
Toward the bottom of this page is a small  
chart showing the rating system and  
corresponding Parental Control ratings for  
the USA.  
prescribed by the ISO, the International  
standardization organization and MPEG  
which is a joint activity institution of the IEC.  
MP3 files contain compressed audio data.  
MP3 encoding is capable of compressing  
audio data at extremely high ratios,  
reducing the size of music files to as much  
as one-tenth their original size. This is  
achieved while still maintaining near CD  
quality. The MP3 format realizes such high  
compression ratios by eliminating the  
sounds that are either inaudible to the  
human ear or masked by other sounds.  
The player can be set in a similar way. If the  
player's parental level is set to 8 it will play  
all discs. If the player's parental level is set  
below 8, only discs with a lower or equal  
parental level will play.  
Corresponding file systems  
This device supports discs formatted with  
iso9660 level 1 or level 2. Under the  
iso9660 standard, there are some  
restrictions to remember.  
The maximum nested folder depth is 8  
(including the root directory). The number  
of characters for a folder/file names are  
letters A-Z (all caps), numbers 0-9, and '_'  
(underscore).  
This device also can play back discs in  
Joliet, Romeo, etc., and other standards  
that conform to iso9660. However,  
sometimes the file names, folder names,  
etc., are not displayed correctly.  
For example if the player is set to 5, only  
discs with parental control ratings of 1-5 will  
play. To play a disc with higher number  
rating, you must change the player's rating  
to a higher number.  
Consider a disc that is suitable for most  
audiences, and is rated as level 2 for the  
most part. However in the middle there are  
also scenes rated at 5 & 7 (not suitable for  
children). Alternative scenes with lower  
rating are included. The player plays the  
highest rated scene that the parental  
setting allows.  
A section of the disc can have several  
different sequences that vary in parental  
control level. In the above example of a disc  
with parental control, the player will show a  
different section depending on the parental  
control level set in the player's menu.  
In this way parents can control the content  
of films and there is no indication that any  
censorship has occurred.  
Unlock  
KID SAFE  
G
Unlock  
PG-R  
R
1
2
3
4
5
6
7
PG  
PG 13  
NC-17  
8 ADULT  
User’s Manual - page 17  
 
You can either choose AUTO SELECT,  
which will sense the type of monitor  
attached to the output and select NTSC  
or PAL as needed. If you know the type of  
monitor, you should choose the type in  
this menu rather than letting AUTO  
SELECT do it for you. This is because  
there may be an undesirable small delay  
and some flickering of the screen during  
the AUTO-SELECT process.  
Setup  
In DVD mode, when the disc is playing or  
in stop mode, press SETUP button (19) to  
enter setup menu.  
1. When the cursor is in the upper part of  
the menu, use  
between the different pages.  
buttons to move  
2. Press button to move the cursor to  
the setup page below. Then you can use  
the buttons to move between the  
different setup options.  
SCREEN SAVER  
As with computer monitor, video screens  
can “burn in” if a still image is displayed  
too long on the screen. This unit features  
a “screen saver” which produces a  
moving image to avoid burn-in. If  
SCREEN SAVER is enabled in the Setup  
menu, after a few minutes of displaying a  
moving screen saver image.  
3. Press  
the choice list of each setup option, and  
or ENTER button to move to  
then use  
buttons and ENTER  
button (18) to change your selection.  
4. When the setting is complete, press  
SETUP button (19) to return to normal  
mode.  
* When settings are changed, old settings  
are overwritten. Make note of the current  
settings before making changes. If the  
vehicle’s battery is disconnected, the  
settings will be cleared and will return to  
the factory settings when power is next  
applied.  
SETTING the TV TYPE  
TV types can vary based on their aspect  
ratio. The common monitors fall into one  
of three categories:4:3 (PS/Pan and  
Scan), 4:3 (LB /Letterbox) or 16:9 (  
Widescreen). Playing a video recorded in  
one aspect ratio on a monitor with a  
different ratio can result in some  
mismatches and undesirable display  
distortion or cutoffs. Read the following  
to assist you in setting up the TV type:  
4:3 PS (PAN SCAN)  
System Setup  
When you open the setup menu, you will  
see the system setup page at first, see  
below:  
SYSTEM SETUP  
TV SYSTEM  
SCREEN SAVER  
TV TYPE  
Select this when connected to a  
conventional 4:3 size monitor. The  
picture will fill the entire TV screen.  
However, due to the mismatch in aspect  
ratio, parts of the movie at the extreme  
left and right sides will not be visible  
(when playing a 16:9 size movie).  
PASSWORD  
RATING  
DEFAULT  
EXIT SETUP  
TV SYSTEM  
TV SYSTEM is used to select the TV  
output mode. This player can play discs  
recorded in either PAL or NTSC formats.  
Select NTSC format, when the unit is  
connected to NTSC TV.  
4:3 (Pan and Scan) format is the factory  
default setting for this product.  
Select PAL format, when the unit is  
connected to PAL TV.  
User’s Manual - page 18  
 
4:3 (LETTER BOX)  
3) Press or button to select  
RATING” then press ENTER button.  
The restriction level (parental level)  
input display appears.  
When you are playing a widescreen  
format video on a normal (4:3) monitor,  
the best way to view this is in (4:3)  
letterbox format. You can see the full  
picture, but there will be a black band at  
the top and bottom of the screen.  
4) Press  
restriction level (1 to 8), and then press  
/
button to select the  
ENTER button.  
5) When the setting is complete, press  
SETUP button to return to normal mode.  
DEFAULT  
Selecting DEFAULT and confirming it will  
restore all the System Settings to those  
programmed at the factory, except the  
Parental Controls and Password.  
16:9 (WIDESCREEN)  
Select this when connected to a wide  
screen TV.  
Language Setup  
When you open the language setup  
menu, you will see the language setup  
screen:  
LANGUAGE SETUP  
PASSWORD  
OSD LANGUAGE  
AUDIO LANG  
SUBTITLE LANG  
MENU LANG  
DIVX [R]  
The Password system is used in  
conjunction with the Parental Controls  
settings to prevent a young person from  
changing the settings without  
permission. The factory default password  
is 0000. If you wish to change this, enter  
0000 and when prompted, enter a  
differetn 4-digit number.  
EXIT SETUP  
There are many choices for the menu,  
DVD and subtitle languages. You set the  
languages for the DVD player in different  
menus than the languages for playback  
and subtitling on the discs. Of course,  
options vary from disc to disc so some  
settings may not be available.  
PARENTAL CONTROL LEVEL  
Use this function to restrict the viewing of  
movies to children of appropriate age  
levels only.  
1) Press  
or  
PASSWORD” then press ENTER button.  
button to select  
OSD LANGUAGE:  
ENGLISH/GERMAN/SPANISH/FRENCH/PORTU  
GUESE/ITALIAN/RUSSIAN/POLISH  
2) The password input mode is activate.  
Use the numeric keypad “0” to “9” to input  
the 4-digit password, and then press  
ENTER button. (The default password is  
“0000” upon shipment from the factory.)  
AUDIO LANG:  
ENGLISH/GERMAN/SPANISH/FRENCH/PORTU  
GUESE/ITALIAN/RUSSIAN/POLISH  
User’s Manual - page 19  
 
SUBTITLE LANG:  
ENGLISH/GERMAN/SPANISH/FRENCH/PORTU  
GUESE/ITALIAN/RUSSIAN/POLISH  
Specification  
1. Supply voltage:  
Power Supply Requirements  
12V DC (11~15V), test voltage 14.4V,  
negative ground  
MENU LANG:  
ENGLISH/GERMAN/SPANISH/FRENCH/PORTU  
GUESE/ITALIAN/RUSSIAN/POLISH  
Current consumption:  
Less than 2 A  
Audio Setup  
When you open the AUDIO menu, you will  
see the following screen:  
2. Signal system:  
Compositive video 1.0 0.2Vp-p 75Ω  
+
-
AUDIO SETUP  
3. Discs played:  
(1) DVD-VIDEO disc]  
(2)Compact disc(CD-DA/CD-R/CD-  
RW/MP3)  
AUDIO OUT  
KEY  
(3) VIDEO CD  
EXIT SETUP  
1) AUDIO OUT: Change among  
SPDIF/OFF, SPDIF/RAW and  
SPDIF/PCM.  
4. Audio output level:  
+
10KΩ (2ch 2.0 0.5Vrms)  
-
2) KEY: Change among b, -4, -2, 0, +2,  
+4, #.  
5. Audio signal output characteristics:  
(1) Frequency response:  
20Hz - 20 Khz  
Digital Setup  
(2) S/N ratio:  
80 dB(JIS)  
When you open the DIGITAL SETUP  
menu, you will see the DIGITAL SETUP  
screen:  
(3) Wow and flutter:  
Below measurable limits  
DIGITAL SETUP  
Note:  
OP MODE  
DYNAMIC RANGE  
DUAL MONO  
Specifications and design are subject to  
modification, without notice, due to  
improvements in technology.  
EXIT SETUP  
1) OP MODE: Change among LINE  
OUT/RF REMOD.  
- LINE OUT: LINE OUT mode, with  
digital dialog normalization.  
- RF REMOD: RF REMODULATION  
mode, with heavy compression and  
digital dialog normalization.  
2). DYNAMIC RANGE: Change among  
FULL, 6/8, 4/8, 2/8, OFF.  
3). DUAL MONO: Change among  
STEREO, MONO L, MONO R, MIX  
MONO.  
User’s Manual - page 20  
 
Trouble Shooting  
If it appears that your DVD unit is faulty,  
please first consult this checklist. It may  
be that something simple has been  
overlooked.  
No Sound  
Check the audio connections.  
The Player Does Not Respond To the  
Remote Control  
Under no circumstances should you try to  
repair the player yourself, as this will  
invalidate the warranty. Only qualified  
service personnel can remove the cover  
or service this player.  
Aim the remote control directly at the  
sensor on the front of the player.  
Remove any obstacles which may  
interfere with the signal path.  
Inspect or replace the remote control  
battery.  
No Power  
If the power supply is connected to the  
car accessory circuits, but the engine is  
not turned on, switch the ignition key to  
“ACC”.  
Distorted or B/W Picture  
The disc format is not according to the  
TV-set used (PAL/NTSC).  
Check if the fuse is blown. Then  
replace the new fuse.  
No Audio at Digital Output  
Check the digital connections  
Check the Digital Audio menu to make  
sure that the digital output is correctly  
set.  
Check if the on/off button on the front of  
the player is set to on.  
No Picture  
Check if the monitor or TV is switched  
on.  
Check if the audio format of the  
selected audio language matches your  
receiver's capabilities.  
Check if select proper mode has been  
selected such as Disc Play mode or AV  
mode.  
Buttons Do Not Work  
Press Reset button on the housing of  
the DVD unit.  
Check the video connection.  
Distorted Picture  
Check the disc for fingerprints and  
clean it with soft cloth, wiping from centre  
to edge.  
Sometimes a small amount of picture  
distortion may appear. This is not a  
malfunction.  
Completely Distorted Picture  
The disc format is not according to the  
TV-set used (PAL/NTSC).  
No Color in Picture  
The disc format is not according to the  
TV-set used (PAL/NTSC).  
Disc Does Not Play  
Ensure the disc label is upwards.  
Clean the disc.  
Check if the disc is defective by trying  
another disc.  
User’s Manual - page 21  
 

Peavey Musical Instrument Amplifier TransChorus 210 User Manual
Peerless Industries TV Mount MM746PU User Manual
Petsafe Pet Fence PIG00 10777 User Manual
Philips CD Player AZ1006 01 User Manual
Philips Computer Monitor 107C62 User Manual
Philips Network Card VOIP080IB User Manual
Philips TV Mount SQM5322 User Manual
Polaroid Portable DVD Player 20060919 User Manual
Polycom Webcam FX VS4000 User Manual
Poulan Chainsaw 952802074 User Manual