PLDVD92
OWNER’S MANUAL
Mobile Video System
• Digital Audio Out-Coaxial
• DVD Player
• Vacuum Fluorescent Display
• Multi-subtitle Languages Function
• Multi-audio Languages Function
• Multi-angle Function
• Parental Control
• Remote Control
CONTENTS
Safety Information ........................................................................................4
Disc Notes .....................................................................................................5
The Player......................................................................................................6
Installation.....................................................................................................7
Mechanical Installation ...........................................................................................7
Electrical Connection..............................................................................................7
Remote Control.............................................................................................8
Preparing the Remote Control..............................................................................10
Loading a DVD/VCD/CD Disc...............................................................................10
Ejecting a Disc......................................................................................................10
Basic Operation ..........................................................................................11
On-Screen Display Function.................................................................................13
Multi-audio Language Function............................................................................14
Menu Function......................................................................................................14
Title Menu Function ..............................................................................................14
Multi-subtitle Language Function.........................................................................14
Multi-angle Function.............................................................................................14
MP3 Disc Play.......................................................................................................15
Setup............................................................................................................16
Initial Setup...........................................................................................................16
General Setup.......................................................................................................16
Speaker Setup......................................................................................................18
Audio Setup..........................................................................................................18
Preferences Setup ................................................................................................19
Defaults Table .......................................................................................................21
Specifications..............................................................................................22
3
SAFETY INFORMATION
CAUTION:
Region Management Information
Region Management Information:
This Mobile DVD Player is designed and
manufactured to respond to the Region
Management Information that is recorded
on a DVD disc. If the Region number
described on the DVD disc does not
correspond to the Region number of this
Mobile DVD Player, this Mobile DVD
Player cannot play this disc.
MOBILE DVD PLAYER IS A CLASS I
LASER PRODUCT. HOWEVER THIS
MOBILE DVD PLAYER USES A
VISIBLE/INVISIBLE LASER BEAM
WHICH COULD CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE MOBILE
DVD PLAYER CORRECTLY AS
INSTRUCTED.
USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND - DO NOT
REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
WARNING:
• TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
• TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES.
• THIS DEVICE IS INTENDED FOR
CONTINUOUS OPERATION.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this
copyright protection technology must be
authorized by Macrovision Corporation,
and is intended for home and other
limited viewing uses only unless
otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
4
DISC NOTES
Disc formats supported by this player
Note these scratches are not an
indication of any problem with the player.
DVD
12 cm disc
(Single-sided disc only)
Label side up
Video CD
12 cm disc
Do not touch
the underside
of the disc
CD
12 cm disc
MP3
12 cm disc
Do not bend
Discs which cannot be played with this
player
• DVD-ROM
• DVD-R/DVD-RAM
• CDV
• CD-G
Wipe the disc from center
toward the outside edge
Handling and Cleaning
• Dirt, dust, scratches and warping disc
will cause misoperation.
• Do not place stickers or make
scratches on discs.
Preparing New Discs with Rough
Spots
A new disc may have rough edges on its
inside and outside edges. If a disc with
rough edges is used, the proper setting
will not be performed and the player will
not play the disc. Therefore, remove the
rough edges in advance by using a ball
point pen or pencil as shown on the right.
To remove the rough edges, press the
side of the pen or pencil against the
inside and outside edges of the disc.
• Do not warp discs.
• A disc should always be kept in its
case when not in use to prevent from
damaging.
• Do not place discs in the following
places:
1. Direct sunlight
2. Dirty, dusty and damp areas
3. Near car heaters
4. On the seats or dashboard
Rough spots on
outside edge
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.
Ball point pen
or pencil
Note:
A disc may become somewhat scratched
(although not enough to make it
unusable) depending on your handle it
and conditions in the usage environment.
Rough spots
on inside edge
5
THE PLAYER
Front View
4
3
2
1
6
DVD
:
A
B
C
D
E
F
5
11 12
9
7
8 10
1. Power ON/OFF (
2. Power Indicator
3. Tray OPEN/CLOSE (
4. Disc Loading Tray
5. Remote Sensor
)
10. PAUSE (
11. VFD Display
)
)
A. Operating status indicator (Play/Pause)
B. Title number indicator
C. Chapter number indicator
D. Disc rotation/speed/direction indicator
E. DVD indicator
6. PLAY (
7. STOP (
)
)
8. Skip Next Chapter (
9. Skip Previous Chapter (
)
F. Playing time indicator
12. Reset
)
Back View
AUDIO OUT
VIDEO OUT
L
1
CLASS
APPAREIL
PRODUCTO LASER DE CLASE
1
LASER PRODUCT
DIGITAL
AUDIO OUT
A
LASER DE CLASSE
1
1
R
2
PRODUTO LASER CLASSE
1
IN
OUT
SERIAL NO
REMOTE
DC 12V
6
7
8
5
1
2
4
3
1. Stereo Audio Out-Left
2. Stereo Audio Out-Right
3. Video Out 1
5. Digital Audio Out - Coaxial
6. DC 12V Power Input Socket
7. DC 12V Power Output Socket
8. Remote Control Socket
4. Video Out 2
6
INSTALLATION
Install your DVD player on a stable flat surface. There must be sufficient space in
front of the player for the drawer to be opened. Don’t expose your player to extremes
of temperature or humidity. Avoid standing it on a hot surface such as on top of other
hot running equipment and ensure that there is adequate ventilation to the player.
MECHANICAL INSTALLATION
Install step showing on as following figure. You can use screws or magic tapes to fix
your unit.
Hexagonal bolt
(M6 x 20) 4pcs
DVD
Tapping screw
(M5x12) 4pcs
Player
Magic Tape
(3 pcs)
Bracket 2pcs
Tighten the screw
4pcs
Sponge 2pcs
Protective Pad
Step 1 (Method A)
Step 1 (Method B)
Step 2
Step 3
TV
ELECTRICAL CONNECTION
1. DIRECT CONNECT WITH A TV
Only connect the Audio cable and Video
cable to your TV. Show on as Fig. 1.
Fix the remote control receiver with magic
tape on the proper position and it can
“see” the remote control.
Fig. 1
A/V CABLE
DVD PLAYER
AUDIO OUT
VIDEO OUT
L
1
CLASS
APPAREIL
PRODUCTO LASER DE CLASE
1
LASER PRODUCT
DIGITAL
AUDIO OUT
A
LASER DE CLASSE
1
1
R
2
PRODUTO LASER CLASSE
1
IN
OUT
SERIAL NO
REMOTE
DC 12V
Magic Tape
Cigarette Lighter
Remote control receiver
2. HOME THEATRE CONNECTION
Connect the video socket on the DVD to your TV. Do not connect the L-R Audio
socket to the TV, or if the L-R connections are made, you need to set the TV volume
control to zero. Show on as Fig. 2. Connect the digital audio out socket on the
DVD to the digital input socket of your 5.1 channel receiver/amplifier.
TV
5.1 CH.RECEIVER
DIGITAL AUDIO
Front
Speaker
(Left)
Front
Speaker
(Right)
A/V CABLE
Fig. 2
DVD PLAYER
Centre
Speaker
AUDIO OUT
VIDEO OUT
L
1
CLASS
APPAREIL
PRODUCTO LASER DE CLASE
1
LASER PRODUCT
DIGITAL
AUDIO OUT
A
LASER DE CLASSE
1
1
R
2
PRODUTO LASER CLASSE
1
Sub woofer
IN
OUT
SERIAL NO
REMOTE
DC 12V
Rear Speaker
(Left Surround)
Rear Speaker
(Right Surround)
Magic Tape
Cigarette Lighter
Remote control receiver
7
REMOTE CONTROL
8
9
4
1
3
7
5
2
6
10
11
14
12
13
15
16
17
18
19
20
21
24
23
25
29
26
30
22
28
32
27
31
8
REMOTE CONTROL
1.
POWER
Press POWER to turn the unit ON or OFF.
Press to eject the disc.
Press to mute the sound.
2. EJECT
3. MUTE
4. SUBTITLE
Changing of the SUBTITLE language on multi-subtitle language
DVD disc.
5. ANGLE
6. DISPLAY
7. PBC
8. SETUP
9. PAL/NTSC
10. AUDIO
Changing of the view angle on multi-angle DVD disc.
Display statistical disc information during playback.
Changing between PBC ON and PBC OFF on the VCD disc.
Display the SETUP menu.
Switch between PAL mode and NTSC mode.
Changing of the AUDIO soundtrack on multi-audio soundtrack
DVD disc. Changing of the sound mode of the VCD/CD disc.
11. TITLE
12. MENU
Display the TITLE menu that is stored in DVD disc.
Display the root menu that is stored on the DVD disc
13.
/
,
/
In case of MENU mode,
buttons to select item left/right, ahead/back.
/
,
/
, buttons served as cursor
14. ENTER
Confirm the Track/Chapter selected with the numeric buttons or
selected with the cursor buttons on screen.
15.
16.
17.
18.
/
Changing for slow forward/reverse playback motion.
Press to play the disc.
/
Press
to search forward rapidly &
to search reverse rapidly.
to skip back one
/
Press
track.
to skip to the next track & press
19.
20.
21. 0 - 9
22. 10+
Press it to stop playback.
Press it to pause playback.
Numeric buttons
Digital selecting button, cooperatively used with numeric buttons.
When you input a number in error, press the button to clear it.
23. CLEAR
24. VOLUME+/-
Press VOLUME+/- button to increase or decrease the volume
level.
25. ZOOM
Allows the picture to be increased or decreased in size.
26. RESUME
When in stop mode, press the button, the play can be resumed
from the stop point.
27. GOTO
28. STEP
Disc search button, cooperatively used with numeric buttons.
Press to stop at the next picture.
29. RANDOM
30. PROGRAM
31. REPEAT
32. A-B
Allows the track played in random order.
Allows the track played in the order you programmed.
Switch the Repeat mode of discs.
A-B repeat allows a passage to be repeated continuously.
9
REMOTE CONTROL
Preparing the Remote Control
Ejecting a Disc
Open the disc loading tray by pressing
button on the front panel or on the
remote control, and then the disc will
stop playing automatically. Then you can
remove the disc and close the tray.
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new batteries. Make sure
that the positive and negative
terminals of the batteries are oriented
indicated.
3. Close the cover
Battery: Two AAA size battery.
Using the Remote Control
Face the remote control towards the
player front face IR mark (remote control
signal receiver).
Operation angle: About 30 degree in
each the direction of the front of the IR
mark.
To prevent damage to the unit, be sure
to follow the connection diagram
(page 7).
Loading a DVD/VCD/CD Disc
1. Turn the ignition on to the accessory
position and the STAND BY indicator
(1) will display red.
2. Press the POWER button (2). The
STAND BY indicator will go out.
3. Press button on the front panel (3)
or on the remote control to open the
disc loading tray (4), then place the
disc with printed side facing up on the
tray.
4. Close the tray by pressing button on
the front panel or on the remote
control, and the player will start
playback automatically.
4
3
1
2
10
BASIC OPERATION
Stopping Play
MUTE
- Brief press the (Stop) button to stop
the unit playback, when press the
(Play) button it can continuous normal
playback.
Will mute the sound, but the disc
continues playing. When you unmute the
sound (press MUTE again), a later
passage will be playing.
- Press (Stop) button twice, it will stop
the playback and go back to initial
Track/Chapter.
Repeat
FOR DVD:
Press the REPEAT button to select repeat
mode as follow.
Rapid Forward/Rapid Reverse
Press
&
during play. Each time the
CHAPTER REPEAT ON
TITLE REPEAT ON
button is pressed, the speed of rapid
forward/reverse changes according to
the disc as follow.
REPEAT OFF
FOR VCD/CD:
Press the REPEAT button to select repeat
mode as follow.
DVD:
Normal Playback
2X
4X
6X
8X
REP-ONE
REP-ALL
REPEAT OFF
VCD/CD:
1. Continuously repeat at the current chapter/
track, when selected REP-ONE mode.
2. Select REP-ALL mode to continuously
repeat all chapter/track on the current disc.
3. When the player finish playback the current
disc last chapter/track, it will stop display
the elapsed time. When selected REPEAT
OFF mode, REP-ONE & REP-ALL
Normal Playback
1X
2X
3X
4X
MP3:
Normal Playback
2X
4X
Skipping Track
Press
buttons on the front panel during
playback.
disappear at the screen display.
4. REPEAT feature does not support
(with PBC ON).
/
on the remote handset or
Press
back one track.
to skip to next track, and
to
A-B
repeat allows a passage to be repeated
continuously. Press A-B button at the
start of the required passage, then press
A-B button again at the end of the
passage. To revert to normal playing,
press A-B button again. Each time the
button pressed, the screen will display
as follows:
Note: For some VCD 2.0 discs
(PBC-playback control),
may be unavailable.
/
buttons
Slow Motion Play
Press
/
during play.
Each time the button is pressed, the speed of
slow forward/reverse changes according to
the disc as follow.
A TO B SET A
TO B SET B
A TO B CANCELLED
DVD:
Normal Playback
2X
4X
8X
Pause (still picture)
Pressing during playback will stop play
temporary. Return to normal playback,
press once again.
11
BASIC OPERATION
Disc Search (GOTO)
pen or thin metal object. Reset button is
to be activated for the following reasons:
- Initial installation of the unit when all
wiring is completed.
FOR DVD:
Press GOTO button twice, the screen will
display the following message:
-
All the function buttons do not operate.
TITLE 01/01 TIME -- : -- : --
00:00:25
- Error symbol on the display.
Remote Sensor (IR)
Point the remote handset to the remote sensor.
Receive the signal from remote handset.
You can select the item you want to
watch through TIME setting by using
numeric buttons and ENTER key.
Turning the player on/off
Press the (POWER) button on the front
panel or on the remote control to turn the
player on or off.
FOR VCD (WITH PBC OFF)/CD:
Press GOTO button once, the screen will
display the following message:
GOTO -- : --
00:00:25
Use numeric buttons to input the time
directly.
ZOOM
Allows the picture to be increased or
decreased in size. Press ENTER to
toggle among 1.5 scale, 2.0 scale and
3.0 scale.
RANDOM
Press RANDOM button, track selection
will be made in random order. The display
screen will show “SHUFFLE ON” on the
right-top corner. Press RANDOM button
again, “SHUFFLE OFF” appears and
release the mode.
PROGRAM
In stop mode, press PROGRAM button,
the screen will display “PROGRAM
P00:00”. For example: press numeric
button 4 and button, “PROGRAM
P01:04” appears. It means track 4 will be
played first.
Reset
Reset button is placed on the front panel
and must be activated with a ball point
12
BASIC OPERATION
(2) Press DISPLAY for the second time:
On-Screen Display Function
Press the DISPLAY button during
playback to display the contents of the
current disc on the screen.
Example:
SINGLE REMAIN
00:03:15
DVD:
(3) Press DISPLAY for the third time:
(1) Press DISPLAY for the first time:
TITLE 01/03 CHAPTER 002/025
00:02:25
TOTAL ELAPSED
00:00:25
(4) Press DISPLAY for the fourth time:
Title Number, Total Title Number, Chapter
Number, Total Chapter Number of this
Title of the disc currently being played
will be shown on the screen, along with
the elapsed time.
TOTAL REMAIN
00:40:35
(2) Press DISPLAY for the second time:
(5) Press DISPLAY for the fifth time:
TITLE REMAIN
01:46:58
The message on the screen will be cleared.
CD:
(1)Press DISPLAY for the first time:
SINGLE ELASPED
00:00:25
(3) Press DISPLAY for the third time:
CHAPTER ELAPSED
00:00:24
TOTAL TRACK : 14
TRACK : - 01
(2)Press DISPLAY for the second time:
(4) Press DISPLAY for the fourth time:
SINGLE REMAIN
00:03:15
CHAPTER REMAIN
00:01:39
TOTAL TRACK : 14
TRACK : - 01
(3)Press DISPLAY for the third time:
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
VCD:
TOTAL ELASPED
00:00:25
TOTAL TRACK : 14
TRACK : - 01
(1) Press DISPLAY for the first time:
SINGLE ELAPSED
00:00:25
13
BASIC OPERATION
(4) Press DISPLAY for the fourth time:
MONO LEFT
MONO RIGHT STEREO
TOTAL REMAIN
00:40:35
MENU Function (For DVD Only)
Press MENU button while the disc is
playing and the disc menu will be
displayed. You can navigate with the
remote control navigation keys and
select a feature with the ENTER key.
TOTAL TRACK : 14
TRACK : - 01
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
TITLE Menu Function
MP3 (When set to NO MENU in SMART
NAV item):
(For DVD only)
If the DVD has multiple titles recorded on
the disc. It can select preferred title from
the title menu to start playback.
- Press TITLE during playback.
The title menu is display.
(1) Press DISPLAY for the first time:
CHAPTER ELASPED 00:00:25
- Press the cursor button shown in TV
screen, select preferred title by the
cursor button and confirmed by
ENTER key.
TOTAL TRACK : 123
TRACK : - 01
(2) Press DISPLAY for the second time:.
Multi-subtitle Language Function
(For DVD only)
CHAPTER REMAIN 00:04:25
Press SUBTITLE during playback.
Each time the button is pressed, number
of the subtitle language changes in
sequential order.
TOTAL TRACK : 123
TRACK : - 01
(3) Press DISPLAY for the third time:
Notes:
- The language number is different
according to the disc.
The message on the screen will be cleared.
- Some discs only contain one subtitle
language.
- When no different subtitle language
are recorded, will be displayed at
screen left top corner.
Multi-audio Language Function
For DVD:
Press AUDIO during playback.
Each time the button is pressed, number
of the audio soundtrack language
changes on sequential order.
Notes:
Multi-angle Function
(For DVD only)
Press ANGLE during playback.
Each time the button is pressed, number
of the angle changes in sequential order.
Notes:
- The language number is different
according to the disc.
- Some disc only contain one language
soundtrack.
- When no different language
soundtrack are recorded will be
displayed at screen left top corner.
- The angle number is different
according to the disc.
- The function only works for discs
having scenes recorded at different
angles.
- When no different angle are recorded,
will be displayed at screen left top
corner.
For VCD/CD:
Press AUDIO during playback.
It is possible to switch the sound
between monaural and stereo sound.
14
BASIC OPERATION
MP3 Disc Play
MP3 disc is playing as the format of
FOLDER.
For example:
SMART NAVI
ROOT
ROOT
MP3 MUSIC
SKY
0
1
MP3 HEAR YOUR
DISC
PLAY MODE
Use
/
,
/
to select the item or
folder, then press ENTER button.
Pressing REPEAT button repeatedly can
select three kinds of repeat play mode.
REP-ONE:
Play the same song over and over
again.
FOLDER REPEAT:
Play all songs in the current directory
in sequence, over and over again.
FOLDER:
Play all songs in the current directory
once.
When select PLAY MODE, press
/
to
change between the following mode:
SINGLE
REP-ONE FOLDER FOLDER REP
DISC REP RANDOM
DISC SCAN DISC
SHUFFLE ON PROGRAM PXXX
In the playback, use or to skip an
item ahead or back.
: Rapid reverse,
: Rapid advance
Note: The FOLDER cannot be selected
during playing. It can be selected after
(Stop) button pressed.
15
SETUP
INITIAL SETUP
GENERAL SETUP
SETUP MENU --- MAIN PAGE
--- GENERAL PAGE ---
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
TV DISPLAY
PIC MODE
NORMAL/PS
NORMAL/LB
WIDE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
PREFERENCES
EXIT SETUP
1. Press SETUP in the stop mode.
(Press the stop button twice to ensure
the player under STOP mode.)
MAIN PAGE
TV Screen
2. The initial SETUP menu is displayed.
3. Select the preferred item by using the
4:3
Wide (16:9)
Video Material
Normal
Pan Scan
Letter-box
4:3
/
buttons.
16:9
4. Press ENTER buttons.
a. GENERAL SETUP
This setup page includes all the
item of TV display & audio output
feature. The detail please refer to
GENERAL SETUP MENU.
TV display setup
This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
connected TV set.
b. SPEAKER SETUP
Normal/PS (For 4:3 TV)
This is to activate the audio output
from DOLBY AC3 5.1 DOWNMIX
to 2 channel mode. Please refer to
SPEAKER SETUP MENU.
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the left
and right edges are cut off.)
Normal/LB (For 4:3 TV)
c. AUDIO SETUP
Played back in letterbox style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
This setup page includes all the
items for AUDIO. Please refer to
AUDIO SETUP MENU.
d. PREFERENCE SETUP
Wide (For 16:9 TV)
Select when a wide-screen TV set is
connected.
This setup page includes all the
configuration of support feature.
The detail please refer to
PREFERENCES SETUP MENU.
16
SETUP
--- GENERAL PAGE ---
--- GENERAL PAGE ---
TV DISPLAY
TV DISPLAY
PIC MODE
AUTO
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
HI-RES
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
N-FLICKER
ENGLISH
MAIN PAGE
MAIN PAGE
PIC mode setup
OSD LANG type setup
Select AUTO, the player PIC mode will
depend on DVD disc.
Select the preferred OSD language by
using the
/
buttons.
Select HI-RES format for best image
resolution.
Select N-FLICKER format on format on
image or picture under noise affect.
--- GENERAL PAGE ---
--- GENERAL PAGE ---
TV DISPLAY
TV DISPLAY
PIC MODE
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
ON
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
OFF
ON
SCR SAVER
OFF
MAIN PAGE
MAIN PAGE
ANGLE MARK display setup
CAPTIONS setup
If it is set to ON, when the multi-angle
Activate the CAPTIONS feature by
selecting ON. And release this feature
by selecting OFF.
DVD disc is playing,
(the angle mark)
will appears on the screen; if is set to
OFF, the mark will not appear.
17
SETUP
--- GENERAL PAGE ---
AUDIO SETUP
--- AUDIO SETUP ---
TV DISPLAY
PIC MODE
AUDIO OUT
OP MODE
ANALOG
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
SPDIF/RAW
SPDIF/PCM
DYNAMIC
LPCM OUTPUT
ON
OFF
MAIN PAGE
SCR SAVER setup
Select the SCR SAVER output ON/OFF.
MAIN PAGE
AUDIO OUT
SPEAKER SETUP
This is to activate the audio output from
ANALOG mode to SPDIF/RAW mode to
SPDIF/PCM mode.
--- SPEAKER SETUP PAGE ---
DOWNMIX
LT/RT
--- AUDIO SETUP ---
AUDIO OUT
STEREO
MAIN PAGE
OP MODE
LINE OUT
DYNAMIC
RF REMOD
LPCM OUTPUT
This is to activate the audio output from
DOLBY AC3 5.1 DOWNMIX to 2 channel
mode. Select the preferred SPEAKER
connection by using the cursor buttons.
- Select the LT/RT to activate the Dolby
surround compatible output.
MAIN PAGE
OP MODE
There are two operating modes for the
Dolby Digital decoder: LINE OUT and
RF REMOD.
- Select the STEREO to activate simple
stereo mode.
18
SETUP
--- AUDIO SETUP ---
PREFERENCES SETUP
--- PREFERENCES PAGE ---
AUDIO OUT
TV TYPE
AUTO
NTSC
PAL
FULL
6/8
OP MODE
AUDIO
DYNAMIC
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
4/8
LPCM OUTPUT
2/8
OFF
MAIN PAGE
Dynamic Range Control
TV type setup
Select DRC and adjust the dynamic
range of a Dobly Digital encoded
program. There are 8 steps between full
compression and off compression.
This player can play discs recorded in
either PAL or NTSC format.
Select NTSC format, when you
connected to NTSC TV.
Select PAL format, when you connected
to PAL TV.
Select AUTO format, the player TV output
format will according to the DVD disc
format.
--- AUDIO SETUP ---
--- PREFERENCES PAGE ---
TV TYPE
AUDIO OUT
OP MODE
DYNAMIC
AUDIO
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
LPCM OUTPUT
LPCM 48K
LPCM 96K
MAIN PAGE
LPCM OUTPUT
Select the LPCM OUTPUT between
LPCM 48K and LPCM 96K.
AUDIO language setup
Select the preferred AUDIO soundtrack
by using the cursor buttons.
19
SETUP
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
TV TYPE
1 G
AUDIO
AUDIO
2
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
OFF
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
3 PG
4 PG 13
5
6 PG-R
7 NC-17
8 ADULT
NO_PARENTAL
SUBTITLE language setup
Select the preferred SUBTITLE language
by using the cursor buttons.
PARENTAL
Select suitable parental guidance by the
cursor buttons and conformed by
pressing ENTER button.
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
AUDIO
TV TYPE
AUDIO
SUBTITLE
SUBTITLE
DISC MENU
PARENTAL
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
CHANGE
DISC MENU language setup
Select the preferred DISC MENU
language by using the cursor buttons.
PASSWORD
Select the change and press ENTER
button. Type the old password (The initial
factory code is 3308) and key in 4
characters password now you want to
use, and retype again to confirm key in
correctly.
20
SETUP
--- PREFERENCES PAGE ---
DEFAULTS TABLE
TV TYPE
General Setup TV Display
PIC Mode
Normal/LB
AUTO
AUDIO
Angle Mark ON
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
OSD Language English
Captions
ON
SCR Saver ON
Speaker Setup Downmix
Stereo
Audio Setup Audio Out
OP Mode
SPDIF/RAW
Line Out
FULL
RESET
Dynamic
LPCM Output LPCM 96K
Preferences TV Type
AUTO
DEFAULTS
Select reset to become factory initial
setting.
Audio
English
English
Subtitle
DISC Menu English
Parental
NO Parental
3308
--- PREFERENCES PAGE ---
Password
Smart NAV With Menu
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
NO MENU
WITH MENU
SMART NAV
In this item, you can select NO MENU
mode or WITH MENU mode.
21
SPECIFICATIONS
Supply Voltage
Current Consumption
Signal System
: 12V DC (11V-15V), test voltage 14.4V, negative ground
: Less than 2A
: Compositive video 1.0Vp-p 75Ω
: (1) DVD-VIDEO Disc
Discs Played
5” (12 cm) single-sided, single-layer
5” (12 cm) single-sided, double-layer
(2) Compact Disc (CD-DA, VIDEO CD)
5” (12cm) disc
Audio Output Level
Audio Signal Output
Characteristics
: 600Ω (2 ch 2.0 Vrms)
: (1) Frequency Response
: (2) S/N Ratio
20 Hz - 20 KHz
90 dB (JIS)
: (3) Wow and Flutter
Below measurable limits
Note:
Specifications and design are subject to modification, without notice, due to
improvements in technology.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
22
|