PLD184V
OWNER'S MANUAL
Mobile Video System
+
-
Anti Theft Flip Down Detachable Panel
VFD Moving Display
Car DVD/VCD/CD/MP3 Player
AM/FM Digital Pll Tuning Radio
Auxiliary Input Function
Parental Control
Remote Control
SAFETY INFORMATION
CAUTION:
THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD
PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE .
HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE
THE DVD PLAYER CORRECTLY AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT
REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.
THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.
This product incorporates copyright protection technology that is protected
by method claims of certain U.S. Patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners.Use of this
copyright protection technology must be authorized by Macro vision Corporation,
and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
REGION MANAGEMENT INFORMATION:
This DVD Player is designed and manufactured to respond to the Region
Management Information that is recorded on a DVD disc. If the Region number
described on the DVD disc does not correspond to the Region number of this
DVD Player, this DVD Player cannot play this disc.
2
DISC NOTES
Disc formats supported by this
player
Note:
A disc may become somewhat
scratched (although not enough to
make it unusable) depending on your
handle it and conditions in the usage
environment.Note these scratches
are not an indication of any problem
with the player.
DVD
12 cm disc
V I D E O
(Single-sided disc only)
Video CD
12 cm disc
CD
Label side
up
12 cm disc
MP3
12 cm disc
MP3
CD-RW
Do not touch
the
underside
of the disc
Discs which cannot be played
with this player
DVD-ROM
DVD-R/DVD-RAM
CDV
Do not
bend
CD-G
Wipe the disc from
center
toward the outside
edge
Handling and Cleaning
Dirt, dust, scratches and warping disc
will cause misoperation.
Do not place stickers or make
scratches on discs.
Preparing New Discs with Rough
Spots
A new disc may have rough edges on
its inside and outside edges.If a disc
with rough edges is used, the proper
setting will not be performed and the
player will not play the disc.Therefore,
remove the rough edges in advance
by using a ball point pen or pencil as
shown on the right.To remove the
rough edges, press the side of the
pen or pencil against the inside and
outside edges of the disc.
Do not warp discs.
A disc should always be kept in its
case when not in use to prevent from
damaging.
Do not place discs in the following
places:
1.Direct sunlight
2.Dirty, dusty and damp areas
3.Near car heaters
4.On the seats or dashboard
Rough spots
on
outside edge
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.
Ball point pen
or pencil
Rough spots
on inside
edge
3
INSTALLATION
NOTES:
Choose the mounting location where the unit will not interfere with the normal
driving function of the driver.
Before finally installing the unit, connect the wiring temporarily and make sure
it is all connected up properly and the unit and the system work properly.
Use only the parts included with the unit to ensure proper installation. The use
of unauthorized parts can cause malfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or
other modifications of the vehicle.
Install the unit where it does not get in the driver's way and cannot injure the
passenger if there is a sudden stop, like an emergency stop.
If installation angle exceeds 30 from horizontal, the unit might not give its
optimum performance.
30
Avoid installing the unit where it would be subject to high temperature, such
as from direct sunlight, or from hot air, from the heater, or where it would be
subject to dust, dirt or excessive vibration.
DIN FRONT/REAR-MOUNT
This unit can be properly installed either from "Front"(conventional DIN
Front-mount) or "Rear"(DIN Rear-mount installation, utilizing threaded
screw holes at the sides of the unit chassis). For details, refer to the following
illustrated installation methods.
4
INSTALLATION
DASH BOARD
METAL MOUNTING
STRAP
HEX NUT
SPRING WASHER
PLAIN WASHER
TAPPING SCREW
CONSOLE
SLIDE BRACKET
HOUSING
HEX BOLT
KEY PLATE
PLASTIC TRIM OUT
KEY PLATE
1.WHILE INSTALLING THE FRONT PANEL, PLEASE MOUNT THE LEFT SIDE FIRST,
AND MAKE THE DIRECTION HOLE ON THE FRONT PANEL AIM AT THE LEFT GUIDE
ON THE UNIT
2.THAN PUSH THE RIGHT SIDE TO MOUNT THE RIGHT GUIDE
3.PUSH IT TO INSTALL THE
FRONT PANEL COMPLETELY .
5
INSTALLATION
CAUTION: DO NOT INSTALL THE DETACHABLE PANEL BEFORE
CONNECTING THE WIRE.
1. The unit is designed for negative terminal of the battery which is connected to the
vehicle metal. Please confirm it before installation.
2. If the car interior is extremely hot, as after being parked in the sun, do not use the
player until the car has been driven for a while to cool off the interior.
3. Press the OPEN button to flip down the front panel (see fig.1), Slide the guide knob
to remove the right side first, then take away the front panel. (see fig.2) and put it in the
protective case (see fig.3) for safe keeping.
4. Install the front panel back into its bracket and then push it back to the position for
playing (see fig.4).
FRONT PANEL
GUIDE KNOB
OPEN BUTTON
(FIG.1)
(FIG.2)
PROTECTIVE CASE
FRONT PANEL
FRONT PANEL
(FIG.3)
(FIG.4)
6
ELECTRIC CONNECTION
MAIN UNIT
AUX(optional)
VIDEO IN YELLOW
RCH IN RED
ANTENNA CONNECTOR
LCH IN WHITE
RCA CABLE
GREY SUBWOOFER
VIDEO OUT 2 YELLOW
IGNITION RED
SWITCH(B+)
COAXIAL OUT BROWN
RCH RED
REAR RCA OUTPUT
CABLE (optional)
CHOKE
BOX
MEMORY
BACK-UP(B+)
YELLOW
BLACK
LCH WHITE
FRONT RCA OUTPUT
CABLE
FRONT RCA RED
VIDEO OUT 1 YELLOW
FRONT RCA WHITE
R
GROUND(B-)
L
(FOR RCA LINE OUT VERSION ONLY)
FUSE
AUTO
ANTENNA
BLUE
GREY
WHITE
FRONT
FRONT
Rch SPK.
Lch SPK.
WHITE/BLACK
GREY/BLACK
VIOLET
REAR
GREEN
REAR
Rch SPK.
Lch SPK.
GREEN/BLACK
VIOLET/BLACK
7
REMOTE CONTROL
1.First push to inside as the direction
indicated by the arrow (See . ) And
then Remove the battery holder as
the direction indicated by the arrow
15
3
1
16
2
14
22
6
BAND
13
11
17
18
5
(See. ).
21
4
2.Replace the battery Set a new battery
8
19
20
9
property with (+)side up as illustrated
(See. ).
7
10
23
3.Insert the battery holder. Push in the
holder to the original position
(See. ).
12
1. Clk
2. Mode
3. Stop
Display And Set The Clock.
Select Playback Mode.
Stops Playback.
Using the Remote Control
Face the remote control towards the
player front face IR mark (remote control
signal receiver).
4. Setup Accesses The Setup Menu.
5. Mo/st Select The Sound Mode.
6. Subtitle Selects a subtitle language.
Lo/dx
In radio mode, depress it for
stronger signal.
7. Repeat Repeat chapter,track,title ,all.
Operation angle: About 30 degree in
each the direction of the front of the
IR mark.
8.
9. Sel
/
Go to next chapter or track.
Change the Audio mode.
10. VOL+/- Adjusts volume level.
11. Selects an item in menu.
12.Menu Accesses menu on a DVD disc.
Sub
press it to switch the
Subwoofer On or Off .
Select the desirec bands.
13.Band
(OSD) display the disc information.
Switches device On and Off.
Stars or Pause playback.
14.
15.
16.Mute
17.Title
Press it to mute down sound.
Display title menu, if available
18.Slow Changing for slow forward/
reverse playback motion
19.Angle Changing of the view angle
on multi-angle DVD disc.
20.EQ
21.
turn to equalization function.
start forward/reverse rapidly.
/
22.Enter Confirm the Track/Chapter.
23. 0 - 9 Numeric buttons.
PREPARING THE REMOTE
CONTROL
INSERTING THE BATTERIES
8
BASIC OPERATION
1
5
14
+
-
17 13 16 15
6
7
8
9 10 11 18 22 4 12
3
2
19
20 21
EJ
1.OPEN BUTTON
Press it to flip down the front panel
then you can insert the cd disc into the
CD compartment. And you can find the
(EJECT)button .Press it to eject the disc.
C.Treble:Press SEL button two times.
Adjust treble level by using VOL + / -
knob.
TREBLE -2
..........................
2-3.VOL+/VOL- & SEL BUTTON
Press it to change audio mode through
volume, bass, treble, balance, and fader
modes. Rotate VOL + /VOL- knob to
adjust the selected mode.(The corresp-
onding value will show on the display.)
D.Balance:Press SEL button three times.
Adjust sound balance between left and
right speakers by using VOL + / VOL -
knob.
A.Volume:Adjust volume level by
using VOL + / VOL - knob..
Note: The unit is initially set to
volume mode.
Balance
-2
VOLUME 6
E.Fader:Press SEL button four times.
Adjust sound balance between front
and rear speakers by using VOL + /
VOL - knob.
B.Bass:Press SEL button one time.
Adjust bass level by using VOL + / VOL -
knob.
Fader
0
BASS +8
..........................
9
BASIC OPERATION
b.continuously repeat all chapter/track
on the current disc, when select the
REPEAT ALL mode.
4.BAND BUTTON
In RADIO mode, press the BAND button
repeatedly to select bands in following
order:
c.REPEAT feature does not support
VCD2.0 (with PBC ON).
FM2
FM3
AM1
(For 2 Bands)
FM1
E.Long press 3/INT button to scan disc.
a. In the state of VCD/CD disc playing,
press the 3/INT button on front panel
to play the previous 10 seconds part of
each track/chapter on disc.
AM2
5.EQ BUTTON
Swing the
knob in the direction of the
(depend on the disc used for VCD)
b. In state of DVD/MP3 disc playing,
the 3/INT button is not available.
F.Long press 4/RDM to play disc in
random.
EQ to turn to equalization function and
to select desired audio mode.
There are four kinds of mode as below:
JAZZ
CLAS
POP
ROCK
a. In the VCD/CD/MP3 disc playing,
press the 4/RDM button on front panel
to play in random
6-7-8-9-10-11.PRESET STATION
A. To memorize the current frequency,
press any one of the six preset buttons
[1-6] on the front panel or on remote
controller hold for more than 2 seconds
B. To recall the preset memory, press
one of the preset buttons [1-6].
(depend on the disc used for VCD).
b. In the DVD disc playing, the 4/RDM
button is not available.
12.AS/PS BUTTON
C. Press 1/TOP button to select the first
track/chapter to play.
When shortly pressing the APS button
on the front panel or the A/P button on
the remote controller, the radio searches
for each preset station. When the field
strength level is more than the threshold
level of stop level, the radio is holding at
that preset number for few seconds with
releasing mute, and then searches again.
In FM band, FM 1,FM 2 and FM 3 is
checked one at a time When long
pressing the APS or A/P button (more
than 1 second), the radio searches from
the current frequency and checks the
signal strength level until 1 cycle search
is finished. And then 6 strongest stations
are preset to the corresponding preset
number.
a. In the state of VCD/CD/MP3 discs
playing, press the button on the front
panel to select the first track/chapter
to play.(depend on the disc used VCD)
b. In the state of DVD disc playing, the
1TOP button is not available.
D. Long press 2/RPT button to select
repeat mode as follow.
DVD:
CHAPTER REPEAT ON
TITLE REPEAT ON
REPEAT OFF
VCD/CD:
REP-ONE
REP-ALL
The AS operation is implemented in the
each band of selected band. When the
AS operation is finished, the radio
executes the preset scan.
a.Continuously repeat at the current
chapter/track, when selected
REP-ONE mode.
10
BASIC OPERATION
13.MUTE BUTTON
Swing the
EQ to eliminate the sound immediately.
Swing it again to release this mode and
recover previous volume level.
20.FLASHING LED
If the front panel is not on the main unit,
LED will be flashing.
knob in the direction of the
21.RESET BUTTON
RESET button is placed on the housing
and must be activated with either a
ballpoint pen or thin metal object.
The RESET button is to be activated for
the following reasons:
a. Initial installation of the unit when all
wiring is completed.
b. All the function buttons do not operate.
c. Error symbol on the display.
Note:If press RESET button , the unit
can't work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the back of the front panel.
14.CLK BUTTON
Press it to change the display to clock
display. Press it again to return to
previous display. In clock display,
press and hold for about 2 seconds until
the hour display flashes. Rotate VOL+/-
knob to adjust hours ,press CLK button
to flash minute then Rotate VOL+/- knob
to adjust minutes.
15.PWR BUTTON
Press it to switch the device ON or OFF.
16.
BUTTON
Pressing
play temporary. Return to normal
playback, press once again.
during playback will stop
22.ST BUTTON
Press ST button to select stereo or
mono reception for radio stations.
17.
/
BUTTONS
Playing an Audio CD or
MP3/WMA file
a. In DISC playback mode, briefly swing
the knob in the direction of the
/
to skip the forward/back one track, press
and hold 2 seconds to fast forwards/fast
reverse.
The speed of rapid forward/reverse
changes according to the disc as follow.
DVD:
This unit can play Audio CDs or Mp3/
WMA files recorded media.
MP3/WMA/Audio CD
Once you insert an MP3/WMA files
recorded media or Audio CD, a menu
appears on the TV screen. Press
/
Normal Playback 2x
4x
16x 100x
to select a track/file then press ENTER
and playback starts. You can use
variable playback function.
VCD/CD/MP3:
Normal Playback 2x
4x
8x
Music
List
Program
C. In radio mode, swing the
/
tune up or down for your desired station.
Press and hold for more than 2 seconds
to automatically tune up or down for the
stronger station.
knob in
the direction of the ,to manually
+
1..............MP3
4-track06.MP3
2..............MP3
............
+
6..............MP3
............
-
............
............
-
............
............
ALL
00:03:36
2/146
18.MOD BUTTON
Press it repeatedly select Disc ,Aux In ,
Radio mode.
1
2
3
4
(1).Current track(file)(highlighted bar)
(2).Elapsed playing time of the current track
(3).Current track (file) number/total number
of tracks(files) in the current folder
(4).Selected playback mode
19.EJECT BUTTON
Press the eject button to eject the disc
form the disc slot.
11
BASIC OPERATION
3. Select the track you want to start
playing on the “ program ” list.
Audio CD
List
Program
1........TRACK1
3........TRACK1
............
4. Press the ENTER to start. Playback
begins in the order in which you program
The tracks. Playback stops after all of
the tracks on the “program” list have
played once.
5. To resume normal playback from
programed playback, select a track on
the list and then press ENTER.
You can use variable playback functions
, refer to above CD/MP3.
+
1........TRACK1
2........TRACK1
3........TRACK1
+
-
-
............
............
4........TRACK1
............
-
ALL
4
00:03:36
4/18
2
1
3
(1).Current track(file)(highlighted bar)
(2).Elapsed playing time of the current track
(3).Current track (file) number/total number
of tracks(files) in the current folder
(4).Selected playback mode
Erasing A Track From
“program” List
1. During STOP mode. Use
select the track that you wish to erase
from the Program list.
-
to
Press REPEAT repeatedly to select the
desired repeat mode.
1.REP-ONE:
2. Press
. Repeat step 1-2 to eras
repeats the current track.
2.REP-ALL
additional tracks on the list.
repeats all the tracks on the list.
3. REP-OFF
does not play repeatedly.
Erasing The Complete Tracks
From “Program” List
1. During STOP mode, use
In the playback, use
an item ahead or back.
or
to skip
buttons to select the
2. Press the ENTER to confirm.
.
-
Swing the
than 2 seconds in the direction of the
, or press on the remote
knob and hold for more
/
/
control to rapid forward/reverse.
PROGRAMMED PLAYBACK
The program function enables you to
store your favorite tracks from any disc
in the player memory.
1. Insert an Audio CD or MP3/WMA files
recorded media. AUDIO CD or MUSIC
menu appears.
2. Use
“list”, press
to Select a track on the
to place the selected
+
track on the “program” list. Repeat to
place additional tracks on the list,
then press the ENTER to confirm. If you
want to add all tracks on the “Program”,
list, press the
ENTER button to confirm.
, and then press the
+
-
12
BASIC OPERATION
ON-SCREEN DISPLAY FUNCTION
This unit features GUI (Graphic User Interface) Menu Icons showing disc
information(title/chapter/track number, elapsed playing time, audio/subtitle
language, angle, and sound) and player information(repeat play, play mode,
marker, etc,). Some icons only show the indicated information. Other icons allow
the settings to be changed.
Press the OSD during playback.
FUNCTION
SELECTION
METHOD
[TV Screen]
For DVD GUI
(Press
/
to select desired item)
To show the current title number and to jump
to the desired title number
0-9 INPUT
ENTER
3/15
1/3
/
/
0-9 INPUT
ENTER
SKIP
To show the current chapter number and to
jump to the desired chapter number.
To show the elapsed time and directly select
scenes by the desired time.
0-9 INPUT
ENTER
00:03:25
To show the current audio soundtrack
language, encoding method, changed
number and to change the settings.
1.CH1
D
3/2.1
,
AUDIO
/
/
/
To show the current subtitle language and to
change the settings.
,
,
SUBTITLE
ANGLE
NONE
1/3
To show the current angle number and to
change the angle.
To show the current sound(NORMAL, or 3D
SURROUND) and to change the setting.
/
NORMAL
Press the OSD during playback.
[TV Screen]
For VCD/SVCD GUI
FUNCTION
/ to select desired item)
SELECTION
METHOD
(Press
To show the current title number and to jump
to the desired title number
0-9 INPUT
ENTER
3/15
00:03:25
NORMAL
/
0-9 INPUT
ENTER
To show the elapsed time and directly select
scenes by the desired time.
To show the current sound(NORMAL, or 3D
SURROUND) and to change the setting.
/
Note:For CD and MP3,press OSD button is not available.
13
BASIC OPERATION
MULTI-AUDIO LANGUAGE
FUNCTION
For DVD:
MULTI-ANGLE FUNCTION(For
DVD only)
Press ANGLE during playback. Each
time the button is pressed, number
of the angle changes in sequential
order.
Press AUDIO during playback.
Each time the button is pressed,
number of the audio soundtrack
language changes on sequential
order.
if the disc has multi-angel views .
if the disc has multi-audio language .
1/3
1/3
1
1/3
1
1/3
ENGLISH
ENGLISH
Ex: When the disc has 3 multi-angle
views
Ex: When the disc has 3 options
For VCD/CD:
Press AUDIO during playback.
It is possible to switch the sound
between monaural and stereo sound.
TITLE MENU FUNCTION
A. DVD: If the DVD has multiple titles
recorded on the disc. It can select
preferred title from the title menu
to start playback.
MONO LEFT
MONO RIGHT
STEREO
A.Press TITLE during playback.
The title menu is display.
b.Press the cursor button shown
in TV screen, select preferred title
by the cursor button and confirmed
by ENTER key.
B. VCD: Press TITLE button on the
remote controller while the disc is
playing, you can switch between
"PBC on"and "PBC off"mode.
RIGHT
RIGHT
RIGHT: To listen to the RIGHT audio
channel.
LEFT: To listen to the LEFT audio
channel.
STEREO: To listen to normal stereo
(left/right) playback.
MULTI-SUBTITLE LANGUAGE
FUNCTION (For DVD only)
Press SUBTITLE during playback.
Each time the button is pressed, number
of the subtitle language changes in
sequential order.
If the disc has multi-subtitle language.
1/3
1/3
ENGLISH
ENGLISH
Ex: When the disc has 3 options
14
SETUP
LANGUAGE SETUP
LANGUAGE
LANGUAGE
Menu Language
Menu Language
Disc Audio
English
Franais
Espanol
Magyar
Deutsch
Italiano
Polski
Disc Audio
OFF
Disc Subtitle
Disc Subtitle
Disc Menu
Original
English
Spanish
German
Italian
Disc Menu
Portuguęs
Greek
Portuguese
French
Russian
Chinese
Other.....
Swedish
Czech
Dutch
MOVE
SELECT
PREV.
MOVE
SELECT
PREV.
3.Disc Subtitle setup
Select the preferred DISC SUBTITLE
language by using the cursor buttons.
1.Menu Language Setup
Select the preferred MENU language
by using the cursor buttons.
LANGUAGE
LANGUAGE
Menu Language
Menu Language
Disc Audio
Original
Original
Disc Audio
Disc Subtitle
Disc Menu
English
Spanish
German
Italian
English
Spanish
German
Disc Subtitle
Disc Menu
Italian
Portuguese
French
Portuguese
French
Russian
Chinese
Other.....
Russian
Chinese
Other.....
MOVE
SELECT
PREV.
MOVE
SELECT
PREV.
2.Disc Audio Language
Select the preferred AUDIO sound-
track by using the cursor buttons.
4.Disc Menu lang type Setup
Select the preferred Disc Menu
Language by using the cursor buttons.
15
SETUP
DISPLAY SETUP
DISPLAY
DISPLAY
TV Aspect
4:3
TV Aspect
Display Mode
TV Output
16:9
Display Mode
TV Output
Letter box
Panscan
Wide SCR
MOVE
PREV.
SELECT
MOVE
SELECT
PREV.
TV Screen
1.TV ASPECT SETUP
Video
Material
4:3
Pan Scan
Wide(16:9)
Normal
Letter-box
This is to select the appropriate
Display Mode(Letter box or Pan scan
Wide screen) according to the
connected TV set.
4:3
16:9
4:3LB(Letter Box)
Select this when the aspect ratio of
your monitor is 4:3.While viewing a
wide screen picture, the black bars
appear on the top and the bottom of
the screen.
2.Display Mode Setup
This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
connected TV set.
Letter Box (For 4:3 TV)
4:3PS(Panscan)
Played back in letterbox style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
Select this when the aspect ratio of
your monitor is 4:3.
While viewing a wide screen picture,
the black bars do not appear;
however, the left and right edges of
the pictures will not be shown on the
screen.
Panscan (For 4:3 TV)
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the
left and right edges are cut off.)
Wide Screen (For 16:9 TV)
Select when a wide-screen TV set is
connected.
16:9 TV(Wide Screen )
Select this when the aspect ratio of
your monitor is 16:9.
16
SETUP
DISPLAY SETUP
DISPLAY
AUDIO
Dolby Digital
TV Aspect
Bitstream
PCM
AUTO
Display Mode
TV Output
DTS
DRC
PAL
NTSC
Digital Output
MOVE
PREV.
SELECT
MOVE
SELECT
PREV.
2.DTS Setup
3.TV OUTPUT SETUP
Select the DTS between Bitstream
and PCM.(Select this when connecting
an amplifier or a decoder compatible
with DTS)
This player can play discs recorded
in either PAL or NTSC format.Select
NTSC format, when you connected to
NTSC TV.Select PAL format, when
you connected to PAL TV.Select AUTO
format, the player TV output format
will according to the DVD disc format..
AUDIO SETUP
AUDIO
AUDIO
Dolby Digital
DTS
Bitstream
PCM
Dolby Digital
DTS
DRC
ON
DRC
Digital Output
Digital Output
OFF
MOVE
SELECT
MOVE
PREV.
SELECT
PREV.
3.DRC Setup
Select the DRC between ON and OFF.
1.Dolby Digital Setup
Select the Dolby Digital between
Bitstream and PCM.(Select this
when connecting an amplifier or a
decoder compatible with DOLBY
DIGITIAL )
17
SETUP
AUDIO SETUP
AUDIO
LOCK
Dolby Digital
Rating
Change
DTS
Password
ON
DRC
Country Code
Digital Output
OFF
MOVE
SELECT
MOVE
PREV.
PREV.
SELECT
2.PASSWORD
4.Digital Output
Select the DRC between ON and OFF.
Select the Change and press ENTER
button. Type the old password (The
initial factory code is 3351) and key
in 4 characters password now you
want to use, and retype again to
confirm key in correctly.
LOCK SETUP
LOCK
LOCK
Rating
Rating
Unlock
8(Adult)
7
6
Password
Password
Country Code
U S
Country Code
5
4
3
2
1(kids)
MOVE
SELECT
PREV.
MOVE
SELECT
PREV.
3.Country Code
1.Rating Setup
Select suitable country code by the
cursor buttons and conformed by
pressing ENTER button.(Please key in
the correctly password before select)
Select suitable parental guidance by
the cursor buttons and conformed by
pressing ENTER button.
18
SETUP
DEFAULTS TABLE
OTHERS SETUP
English
Menu Language
Disc Audio
Original
Language
Display
Disc Subtitle
OTHERS
Load Default
OFF
Disc Menu
Original
Select
TV Aspect
16:9
Screen Saver
Display Mode
Wide screen
Auto
TV Output
Bitstream
Dolby Digital
DTS
PCM
ON
MOVE
PREV.
SELECT
Audio
DRC
ON
Digital Output
Rating
1.LOAD DEFAULT
Select it to become factory initial
setting.
Unlock
3351
U S
Password
Lock Setup
Others
Country Code
Load Default
Screen Saver
Select
ON
OTHERS
Load Default
Screen Saver
ON
OFF
MOVE
SELECT
PREV.
2.SCREEN SAVER SETUP
Select the Screen Saver output
ON/OFF.
19
TROUBLE SHOOTING
SYMPTOM
NO POWER
CAUSE
SOLUTION
If the power supply is properly
connected to the car accessory
terminal,switch the ignition key
to "ACC"
The car ignition switch is
not on
Replace the fuse
The fuse is blown
Remove the disc in the player,
then put a new one
Presence of disc inside the
player.
Insert the compact disc with
the label facing upward
Inserting the disc in reverse
direction
DISC CANNOT
BE LOADED
OR EJECTED
The disc is extremely dirty
or defective
Clean the disc or try to play a
new one
Temperature inside the car Cool off or until the ambient
is too high
temperature return to normal
Volume is in minimum
Adjust volume to a desired level
NO SOUND
Wiring is not properly
connected
Check wiring connection
The antenna cable is not
connected
THE RADIO
DOES NOT
WORK
Insert the antenna cable firmly
Select a station manually
The signals are too weak
SPECIFICATIONS
GENERAL
FM TUNER SECTION
Tuning Range.....................87.5-107.9MHz
IF Range............................10.7MHz
Usable sensitivity(30dB)......15dB
AM TUNER SECTION
SUPPLY VOLTAGE:
12V DC (11V-15V)
CURRENT CONSUMPTION: <10 A
SIGNAL SYSTEM:
Compositive video 1.0Vp-p 75
DISCS PLAYED:
Frequency Range................530-1710KHz
IF Range............................450KHz
Usable sensitivity(30dB)......45dB
(1)DVD-VIDEO Disc
5"(12 cm) single-sided, single-layer
5"(12 cm) single-sided, double-layer
(2)Compact Disc (CD-DA, VIDEO CD)
5"(12cm) disc
NOTE:
Specifications and design are subject to
modification, without notice, due to
improvements in technology.
AUDIO SIGNAL OUTPUT: 2ch&4ch line out
CHARACTERISTICS:
(1)Frequency Response
(2)S/N Ratio
20 Hz - 20 KHz
90 dB (JIS)
(3)Wow and Flutter
Below measurable limits
20
88-V3840-09
|