PLDVD48
OWNER’S MANUAL
Mobile Audio/Video System
•
•
•
Digital Audio Out-Coaxial
PLL Synthesizer Stereo Radio
DVD Player
•
Automatic Memory Storing
Fold Down Detachable Panel
Preset Equalization
Multi-subtitle Languages Function
Multi-audio Languages Function
Multi-angle Function
•
•
•
•
•
•
•
Parental Control
Remote Control
CONTENTS
Safety Information ........................................................................................4
Disc Notes .....................................................................................................5
Installation.....................................................................................................6
Using the Detachable Front Panel .............................................................9
Wiring Connection ......................................................................................10
Location and Function of Keys..................................................................11
The Player ....................................................................................................11
Remote Control.............................................................................................12
Remote Control...........................................................................................14
Preparing the Remote Control......................................................................14
Loading/Ejecting a disc..............................................................................14
Loading a disc ..............................................................................................14
Ejecting a disc...............................................................................................14
Operation.....................................................................................................15
Basic Operation ............................................................................................15
Radio Operation............................................................................................16
Disc (DVD/VCD/CD/MP3) Operation ............................................................17
CDC Operation .............................................................................................22
DVD Changer Operation...............................................................................22
AV IN Operation ............................................................................................23
Setup ...........................................................................................................24
Initial Setup...................................................................................................24
General Setup...............................................................................................24
Speaker Setup ..............................................................................................26
Audio Setup ..................................................................................................26
Preferences Setup ........................................................................................27
Defaults Table ...............................................................................................30
Trouble Shooting.........................................................................................31
Specifications..............................................................................................32
3
SAFETY INFORMATION
CAUTION:
Region Management Information
Region Management Information:
This Mobile DVD Player is designed and
manufactured to respond to the Region
Management Information that is recorded
on a DVD disc. If the Region number
described on the DVD disc does not
correspond to the Region number of this
Mobile DVD Player, this Mobile DVD
Player cannot play this disc.
MOBILE DVD PLAYER IS A CLASS I
LASER PRODUCT. HOWEVER THIS
MOBILE DVD PLAYER USES A
VISIBLE/INVISIBLE LASER BEAM
WHICH COULD CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE MOBILE
DVD PLAYER CORRECTLY AS
INSTRUCTED.
USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND - DO NOT
REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
WARNING:
• TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
• TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES.
• THIS DEVICE IS INTENDED FOR
CONTINUOUS OPERATION.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this
copyright protection technology must be
authorized by Macrovision Corporation,
and is intended for home and other
limited viewing uses only unless
otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
4
DISC NOTES
Disc formats supported by this player
Label side up
DVD
12 cm disc
Video CD
12 cm disc
Do not touch
the underside
of the disc
CD
12 cm disc
MP3
12 cm disc
Do not bend
Handling and Cleaning
• Dirt, dust, scratches and warping discs
will cause misoperation.
• Do not place stickers or make
scratches on discs.
• Do not warp discs.
Wipe the disc from center
toward the outside edge
• A disc should always be kept in its
case when not in use to prevent from
damaging.
• Do not place discs in the following
places:
1. Direct sunlight
2. Dirty, dusty and damp areas
3. Near car heaters
Preparing New Discs with Rough
Spots
A new disc may have rough edges on its
inside and outside edges. If a disc with
rough edges is used, the proper setting
will not be performed and the player will
not play the disc. Therefore, remove the
rough edges in advance by using a ball
point pen or pencil as shown on the right.
To remove the rough edges, press the
side of the pen or pencil against the
inside and outside edges of the disc.
4. On the seats or dashboard
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.
Rough spots on
outside edge
Note:
A disc may become somewhat scratched
(although not enough to make it
unusable) depending on your handle it
and conditions in the usage environment.
Note these scratches are not an
indication of any problem with the player.
Ball point pen
or pencil
Rough spots
on inside edge
5
INSTALLATION
Notes:
DIN FRONT-MOUNT (Method A)
Installation Opening
This unit can be installed in any dashboard
having an opening as shown below:
• Choose the mounting location where
the unit will not interfere with the
normal driving function of the driver.
• Before finally installing the unit,
connect the wiring temporarily and
make sure it is all connected up
properly and the unit and the system
work properly.
53 mm
182 mm
Installing the unit
• Use only the parts included with the
unit to ensure proper installation.
The use of unauthorized parts can
cause malfunctions.
Be sure you test all connections first, and
then follow these steps to install the unit.
1. Make sure the ignition is turned off,
and then disconnect the cable from
the vehicle battery's negative (-)
terminal.
• Consult with your nearest dealer if
installation requires the drilling of holes
or other modifications of the vehicle.
2. Disconnect the wire harness and the
antenna.
3. Press the release button on the front
panel and remove the control panel
(see the steps of “removing the front
panel”).
4. Lift the top of the outer trim ring then
pull it out to remove it.
5. The two supplied keys release tabs
inside the unit's sleeve so you can
remove it. Insert the keys as far as they
will go (with the notches facing up) into
the appropriate slots at the middle left
and right sides of the unit. Then slide
the sleeve off the back of the unit.
• Install the unit where it does not get in
the driver’s way and cannot injure the
passenger if there is a sudden stop,
like an emergency stop.
• If installation angle exceeds 30˚ from
horizontal, the unit might not give its
optimum performance.
30˚
• Avoid installing the unit where it would
be subject to high temperature, such
as from direct sunlight, or from hot air,
from the heater, or where it would be
subject to dust, dirt or excessive
vibration.
Sleeve
L Key
Outer Trim Ring
Front Panel
DIN FRONT/REAR-MOUNT
R Key
This unit can be properly installed either
from “Front” (conventional DIN Front-
mount) or “Rear” (DIN Rear-mount
installation, utilizing threaded screw holes
at the sides of the unit chassis).
For details, refer to the following
illustrated installation methods.
6
INSTALLATION
6. Mount the sleeve by inserting the sleeve
into the opening of the dashboard and
bend open the tabs located around the
sleeve with a screwdriver. Not all tabs
will be able to make contact, so
examine which ones will be most
effective. Bending open the appropriate
tabs behind the dashboard to secure
the sleeve in place.
Spring Washer
Hex Nut
Metal Strap
Mounting Bolt
Plain Washer
Tapping Screw
Dashboard
Tabs
10. Reconnect the cable to the vehicle
battery's negative (-) terminal. Then
replace the outer trim ring and install
the unit's front panel. (see the steps
of “installing the front panel”).
Screwdriver
Removing the unit
1. Make sure the ignition is turned off,
then disconnect the cable from the
vehicle battery's negative (-) terminal.
2. Remove the metal strap attached the
back of the unit (if attached).
3. Press the release button to remove the
front panel.
4. Lift the top of the outer trim ring then
pull it out to remove it.
5. Insert both of the supplied keys into
the slots at the middle left and right
sides of the unit, then pull the unit out
of the dashboard.
Sleeve
7. Reconnect the wire harness and the
antenna and be careful not to pinch
any wires or cables.
8. Slide the unit into the sleeve until it
locks into place.
9. To further secure the unit, use the
supplied metal strap to secure the back
of the unit in place. Use the supplied
hardware (Hex Nut (M5mm) and Spring
Washer) to attach one end of the strap
to the mounting bolt on the back of
the unit. If necessary, bend the metal
strap to fit your vehicle's mounting
area. Then use the supplied hardware
(Tapping Screw (5x25mm) and Plain
Washer) to attach the other end of
metal strap to a solid metal part of the
vehicle under the dashboard. This strap
also helps ensure proper electrical
grounding of the unit.
Note to install the short threading
terminal of the mounting bolt to the
back of the unit and the other long
threading terminal to the dashboard.
7
INSTALLATION
DIN REAR-MOUNT (Method B)
If your vehicle is a Nissan, Toyota, follow
these mounting instructions.
Use the screw holes marked T (Toyota),
N (Nissan) located on both sides of the
unit to fasten the unit to the factory radio
mounting brackets supplied with your
vehicle.
Side view showing
Screw Holes marked
T, N
Factory Radio
Mounting
Bracket
Screw
Hook
Screw
Dashboard or
Console
To fasten the unit to the factory radio
mounting brackets.
1. Use a screwdriver to loose the hook's
screws of the front left and right sides
of the unit and remove the hooks.
2. Align the screw holes on the bracket
with the screw holes on the unit, and
then tighten the screws (5x5mm) on
each side.
Note: the outer trim ring, sleeve and the
metal strap are not used for method B
installation.
8
USING THE DETACHABLE FRONT PANEL
To Detach the Front Panel
1. Press the OPEN button (OPEN) , then
the front panel will be folded down.
To Reinstall the Front Panel
1. When the metal plate is folded down,
insert the front panel into the metal
plate then push them into the main
body. A ‘click’ sound should be heard.
Open
2. Remove the front panel by pulling its
middle-hand side outward.
2. Note that if the front panel fails to lock
in position properly, pressing control
button may not function and display
may be missing some segments.Press
the OPEN button and then reinstall
the front panel again.
Front Panel
3. For safekeeping, store the front panel
in the supplied protective case
Precautions when Handling
1. Do not drop the front panel.
2. Do not put pressure on the display or
control buttons when detaching or
reinstalling the front panel.
immediately after being removed.
Protective Case
3. Do not touch the contacts on the front
panel or on the main unit body. It may
result in poor electrical contact.
4. If any dirt or foreign substances
adhered on the contacts, they can be
removed with a clean and dry cloth.
5. Do not expose the front panel to high
temperatures or direct sunlight in
anywhere.
6. Keep away any volatile agents (e.g.
benzene, thinner, or insecticides) from
touching the surface of the front
panel.
Front Panel
4. Push the front metal plate into the
main body. A ‘click’ sound should be
heard.
7. Do not attempt to disassemble the
front panel.
9
WIRING CONNECTION
AUDIO R IN (RED)
AUDIO L IN (WHITE)
VIDEO IN (YELLOW)
AV IN CABLE (BLACK)
AV OUT CABLE (GRAY)
ANTENNA
CONNECTOR
VIDEO OUT 1 (YELLOW)
VIDEO OUT 2 (YELLOW)
DIGITAL AUDIO (ORANGE)
DC OUT (BLACK)
(BLACK)
CD CHANGER OR DVD CHANGER
CONNECTOR SOCKET
FUSE
GREEN
BLACK YELLOW
RED
FRONT RCA CABLE(BROWN)
Rch
WHITE
Lch
RED
REAR RCA CABLE(GREY)
Rch
WHITE
Lch
SUBWOOFER CABLE (GREEN)
PINK
BLUE
RED
TELEPHONE MUTE
(OPTIONAL)
POWER ANTENNA
IGNITION
SWITCH (ACC+)
MEMORY
BACK-UP(B+)
YELLOW
CHOKE
BOX
BLACK
GROUND (B-)
GREY
WHITE
FRONT Lch
FRONT Rch
SPEAKER
SPEAKER
WHITE/BLACK
GREEN
GREY/BLACK
VIOLET
REAR Lch
SPEAKER
REAR Rch
SPEAKER
GREEN/BLACK
VIOLET/BLACK
MUTE WHILE TELEPHONING
If your unit is connected to a mobile telephone through the telephone mute
line, the car radio’s volume will be muted as soon as you “pick up” the
telephone. “TEL MUTE” flashes in the display.
10
LOCATION AND FUNCTION OF KEYS
THE PLAYER
16 9 7 3 17
15
6
8 13
10
19
12
11
5
4
1
2
18
20
21
22 14 23
24
25 26
14. 1-6 preset buttons
15. SMART
16.
1. (PWR/ILL)
2.
3.
17.
4. DISP
5. IR
18. AMS/ STOP
19. SEL
6. MODE/(SW)
7. OPEN
8. Vacuum Fluorescent Display
9. MUT/ENT
10. ST/LOC/TITLE
11. VOL+
20.
21. SCN
22. RPT
23. SHF
24. CD-
25. CD+
12. VOL-
13. MENU/BAND
26. Reset button
When remove the front panel:
28
27
29
27. Disc Slot
28. LED
29.Eject button
11
LOCATION AND FUNCTION OF KEYS
REMOTE CONTROL
27
5
24
1
3
8
2
6
4
7
25
9
28
10
31
30
26
29
15
12
11
13
23
18
19
17
16
14
20
22
21
12
LOCATION AND FUNCTION OF KEYS
1. POWER/ILL Press it to turn the unit on.
When system is on, press shortly to control the brightness of VFD.
Press it for several seconds to turn off the unit.
2. SMART (DISC) In DVD mode, press it shortly to enter SMART MODE function.
(For details, refer to the following text).
In DVD changer mode, press DISC button to select another disc.
3. A-B
A-B repeat allows a passage to be repeated continuously.
Changing of the view angle on multi-angle DVD disc.
Press to play/pause the disc.
4. ANGLE
5.
6. MODE (SW)
Changing between radio mode, disc (DVD/VCD/CD/MP3) play
mode, CDC mode and AV IN mode.
Press it for several seconds to toggle sub-woofer output. Press it
for several seconds again to release this mode.
Allows the picture to be increased in size.
Press to mute the sound.
7. ZOOM
8. MUTE
9. SUBTITLE
10. SETUP
11. SEL
Changing of the SUBTITLE language on multi-subtitle language DVD disc.
Display the SETUP menu.
Press to select the desired adjustment mode. Then press VOL+/-
to change settings.
12.
13. OK
14.
/
,
/
In case of menu mode,
/
,
/
buttons served as cursor buttons
to select item left/right, ahead/back.
Confirm the Track/Chapter selected with the numeric buttons or
selected with the cursor buttons on screen display.
Changing for slow playback motion (For VCD/DVD).
Display the TITLE menu that is stored in DVD disc.
In radio mode, press it shortly to select mono or stereo mode. Press
and hold it for a long time to select between local and distant stations.
/
15. ST (TITLE)
16.
17.
/
Press
to search forward rapidly &
to search reverse rapidly.
In radio mode, press
/
shortly to increase or decrease frequency
by one step of channel spacing.
Press
/
to skip to the next track & press
to skip back one track.
In radio mode, press
/
shortly to activate automatic seek
function. When hold for several seconds until “MANUAL” appears,
the manual tuning mode is selected.
When the clock flashing, use
/
to adjust the minutes or hours.
18. AUDIO
Press the button to change the AUDIO soundtrack on multi-audio
soundtrack DVD disc. Press the button to change the sound mode
of the VCD discs.
19. EQ
Press it to select the equalization mode, such as FLAT, CLAS, POP, ROCK.
Numeric buttons
20. 0-9
21. PBC
22. GOTO
Changing between PBC ON and PBC OFF on the VCD disc.
Disc search button, cooperatively used with numeric buttons.
23. VOLUME+/- Press VOLUME+/- button to increase or decrease the volume level.
24. DISPLAY
Display statistical disc information during playback.
Pess it to display the clock, hold down the button until the clock
flashes, then use
/
to adjust the minutes or hours.
25. REPEAT
26. P/N
Switch the Repeat mode of discs.
Switch between PAL mode and NTSC mode.
27. PROGRAM Allows the track played in the order you programmed (For MP3/CD).
28. SHUFFLE
29. RESUME
Allows the track played in random order (NOT for DVD).
When in stop mode, press the button, the play can be resumed from
the stop point.
30. AMS (STOP) In radio mode, press for several seconds to enter into automatic
memory storing function; press shortly to scan preset station. During
disc playing, press it to stop disc playback.
31. BND (MENU) In DVD mode, display the root menu that is stored on the DVD disc
or return to disc menu on the VCD discs.
In radio mode, press it to select desired band.
13
REMOTE CONTROL
Preparing the Remote Control
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new battery. Make sure
that the positive and negative
terminals of the battery are oriented
as indicated.
3. Close the cover.
Battery: a button cell lithium battery
(CR2025 3V)
Using the Remote Control
Point the remote control towards the
player front face remote sensor IR
(remote control signal receiver).
Operation angle: About ± 30 degree in
each the direction of the front of the
remote sensor.
LOADING/EJECTING A DISC
Loading a Disc
When all connections have completed,
you can load a disc as follow:
1. Turn the ignition on to the accessory
position.
2. Press the PWR/ILL button on the front
panel or POWER/ILL button on the
remote control to turn on the unit.
3. Press OPEN button on the front panel
to fold down the panel.
Open button
4. Insert the disc with printed side facing
up into the disc slot.
5. The player will start playback
automatically.
Ejecting a Disc
When the front panel is folded down,
press button on the back of the front
panel to eject the disc.
14
OPERATION
BASIC OPERATION
FLAT
CLAS
POP
ROCK
DSP OFF
SWITCHING ON/OFF THE UNIT AND
ILLUMINATING
Press PWR/ILL button on the front
panel or POWER/ILL button on the
remote control to turn on the unit. When
system is on,press PWR/ILL or
POWER/ILL button shortly to control the
brightness of VFD. Press the button for
several seconds to turn off the unit.
SUBWOOFER
Press MODE (SW) button on the front
panel or on the remote control for several
seconds to toggle sub-woofer output.
Press it for several seconds again to
release this mode.
MODE SELECTION
Press MODE button on the front panel of
the unit or MODE button on the remote
control to select among radio, disc
(DVD/VCD/CD/MP3) play mode, CDC
mode and AV IN mode.
FACEPLATE RELEASE
Press OPEN button on the front panel to
detach the removable faceplate.
SOUND ADJUSTMENT
VACUUM FLUORESCENT DISPLAY
Exhibit current frequency and activated
functions on the display of the front
panel.
Press SEL button on the front panel of
the unit or on the remote control to select
the desired adjustment mode.
The adjustment mode will change in the
following order:
FLASHING LED
If the front panel does not install in the
main unit, the LED will be flashing.
VOL
BASS
TRE
MID
BAL
(Balance)
FAD
(Fader)
(Volume) (Bass) (Treble) (Middle)
By pressing the VOL+/- buttons on the
front panel or VOLUME +/- buttons on
the remote control, it is possible to adjust
the desired sound quality.
REMOTE SENSOR
Point the remote control handset to the
remote sensor IR. Press the function
keys on the handset to control the
system.
SET THE CLOCK
Press the DISP button on the front panel
or DISPLAY button on the remote control,
the clock is shown on the display. Then
hold down the DISP button or DISPLAY
button until the clock flashes. Then press
RESET FUNCTION
RESET button must be activated with
either a ballpoint pen or thin metal object.
The RESET button is to be activated for
the following reasons:
button on the front panel or
button
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
on the remote control to change minutes;
press
on the front panel or
button
on the remote control to change hours.
Note: if press RESET button, the unit
can’t work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.
MUTE
Press and hold MUT/ENT button on the
front panel for several seconds or press
MUTE button on the remote control to
mute down the sound instantly. Press it
again to resume sound output.
EQUALIZATION
Press EQ button on the remote control to
turn on equalization function and to select
desired audio mode. There are five kinds
of mode as below:
15
OPERATION
RADIO OPERATION
panel or on the remote control for
several seconds, the radio searches
from the FM1 the initial frequency and
checks the signal strength until one
cycle search is finished. And then 6
strongest stations are stored into the
corresponding preset number button.
- Program scanning
SWITCHING TO RADIO MODE
Press MODE on the front panel or MODE
on the remote control to select radio
mode, the radio mode appears in the
display together with the memory band
and frequency.
SELECTING THE FREQUENCY BAND
During radio mode, shortly press MENU
(BAND) button on the front panel or BND
(MENU) button on the remote control to
select the desired band. The reception
band will change in the following order:
Press AMS button shortly to scan preset
station.
STATION STORING
Press any one of the preset buttons (1 to
6) on the front panel to select a station,
which had been stored inthe memory.
Press this button for several seconds,
current station is stored into the number
button.
FM1
FM2
FM3
AM1
AM2
SELECTING STATION
Press buttons on the remote
control or buttons on the front
panel shortly to activate automatic seek
function. Press and hold buttons
/
MONO/STEREO
/
Press ST/LOC/TITLE button on the front
panel or ST/TITLE button on the remote
control shortly to select mono or stereo
mode. You can sometimes improve
reception of distant stations by selecting
mono operation.
/
for several seconds until “MANUAL”
appears on the display, the manual tuning
mode is selected.
Then shortly press
/
buttons to
increase or decrease frequency by one
step of channel spacing, hold the buttons
longer for fast tuning. If both buttons have
not been pressed for several seconds, it
will return to seek tuning mode and
“AUTO” appears on the display.
SCAN
Press MUT/ENT button on the front panel
shortly to set function to scan mode,
which scanning to higher frequency station
with receivable signal and keep on each
station for several seconds.
Shortly press
control or
/
buttons on the remote
/
buttons on the front panel
to increase or decrease frequency by one
step of channel spacing. The frequency
is updated correspondingly on display.
LOCAL/DISTANT
Press and hold ST/LOC/TITLE button on
the front panel or ST/TITLE button on the
remote control for several seconds to
select between local and distant stations.
Local setting for reception of strong
station, and a distant setting for reception
of weaker stations. This function is effect
during AUTO SEEK operation.
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press and hold AMS button on the front
16
OPERATION
REPEATING PLAYING
FOR DVD:
DISC (DVD/VCD/CD/MP3) OPERATION
STOPPING PLAY
Press RPT button on the front panel or
REPEAT button on the remote control to
select repeat mode as follow:
- Briefly press the AMS/STOP button on
the front panel or AMS (STOP) button
on the remote control to stop the unit
playback, when the
button is
CHAPTER REPEAT ON
TITLE REPEAT ON
pressed, normal playback will
continue.
- Press AMS/STOP button or AMS
(STOP) button twice to stop the
playback and go back to initial
Track/Chapter.
REPEAT OFF
FOR VCD/CD:
In stop mode, press RPT button or
REPEAT button to select repeat mode
as follow:
REP-ONE
REP-ALL
REPEAT OFF
RAPID FORWARD/RAPID REVERSE
Press
&
during play. Each time the
1. Continuously repeat at the current
chapter/track, when selected REP-
ONE mode.
2. Select REP-ALL mode to continuously
repeat all chapter/track on the current
disc.
button is pressed, the speed of rapid
forward/reverse changes according to
the disc as follow:
FOR DVD/MP3:
Normal Playback
2X
4X
6X
8X
3. When the player finishes playback the
current disc last chapter/track, it will
stop display the elapsed time. When
selected REPEAT OFF mode, REP-
ONE & REP-ALL disappear at screen
display.
FOR VCD/CD:
Normal Playback
1X
2X
3X
4X
SKIPPING TRACK
Press
or
/
buttons on the front panel
buttons on the remote control
/
4. REPEAT feature does not support
VCD2.0 (with PBC ON).
during playback.
Press
to skip to next track, and
to
back one track.
Note: For some VCD 2.0 discs
(PBC-playback control),
may be unavailable.
PBC FUNCTION
While the VCD disc is playing, press
MENU (BAND) button on the DVD unit
or PBC button on the remote control to
change between PBC ON and PBC OFF
on the VCD disc.
/
buttons
SLOW MOTION PLAY
Press
/
button on the remote control
during play.
ZOOM FUNCTION
Each time the button is pressed, the
speed of slow forward changes
according to the disc as follow:
FOR DVD:
Allows the picture to be increased in size.
Press ZOOM button on the remote
control to toggle among 1.5 scale, 2.0
scale and 3.0 scale.
Normal Playback
2X
4X
8X
When the scale is 3 times, press ZOOM
button again to cancel the zoom function.
1.5X
2.0X
3.0X
Cancelled
FOR VCD:
Normal Playback
1X
2X
3X
During Zoom mode, press
buttons to move pictures up, down, left
or right direction.
/
,
/
PAUSING PLAYING
Pressing on the remote control or on
the front panel during playback will stop
play temporary. To return to normal
REPEATING PLAYING A PASSAGE
A-B repeat allows a passage to be
repeated continuously. Press A-B button
playback, press
once again.
17
OPERATION
on the remote control at the start of the
required passage, then press A-B button
again at the end of the passage. To revert
to normal playing, press A-B button
again. Each time the button is pressed,
the screen will display as follows:
PREVIEWING PLAYING (ONLY FOR
VCD/CD/MP3)
Press SCN button on the front panel to
play first several seconds of each track
on the current disc. Press again to stop
intro and listen to track.
PLAYING IN PROGRAMMED ORDER
For CD/VCD (WITH PBC OFF):
A TO B SET A
A TO B SET B
A TO B CANCELLED
TIME SEARCH (GOTO)
FOR DVD
Press GOTO button on the remote
control twice, the screen will display the
following message:
Press the STOP button twice to ensure
that the player is in STOP mode. Then
press PROGRAM button, the screen will
display “PROGRAM P00:00”. For
example: press numeric button 4,
“PROGRAM P01:04” appears, it means
track 4 will be played first, then press
numeric button 6 and “PROGRAM
P02:06” appears. Press the different
numeric button to select the
TITLE 01/01 TIME -- : -- : --
00:00:25
You can select the item you want to
watch through TIME setting by using
numeric buttons and MUT/ENT button
on the front panel or OK button on the
remote control.
FOR CD/VCD (WITH PBC OFF):
Press GOTO button once, the screen will
display the following message:
corresponding track, and then press OK
button to confirm. If there isn’t any
operation, it will confirm the inputs
automatically after five seconds. Then
press
button or OK button to exit
program mode and play tracks in
programmed order.
When playing in programmed order,
press STOP button twice, then press
PROGRAM button, and then press OK
button, it will play in normal order.
For MP3:
GOTO -- : --
00:00:25
In stop mode, press PROGRAM button,
the screen will display “PROGRAM
P00:0000” and the program method is
the same as described above. If you
want to complete program setting, press
AMS/STOP button first then press
button to play tracks in programmed order.
In stop mode press PROGRAM button
to exit program mode and “PROGRAM
OFF” appears.
Use numeric buttons to input the time
directly.
PLAYING IN RANDOM ORDER (ONLY
FOR VCD/CD/MP3)
Press SHF on the front panel or
SHUFFLE button on the remote control,
track selection will be made in random
order. The display screen will show
“SHUFFLE ON” on the screen. Then
If you set WITH MENU in SMART NAV
item in PREFERENCES PAGE, you can
press
button to start SHUFFLE
playback. Press SHF button or
SHUFFLE button again in stop mode,
“SHUFFLE OFF” appears and release
the mode.
use
/
,
/
buttons to select
PROGRAM PXXX mode or track number
and press OK button to confirm it.
18
OPERATION
(2) Press DISPLAY for the second time:
ON-SCREEN DISPLAY FUNCTION
Press the DISPLAY button during
playback to display the contents of the
current disc on the screen.
SINGLE REMAIN
03:15
01/13
Example:
FOR DVD:
(3) Press DISPLAY for the third time:
(1) Press DISPLAY for the first time:
TITLE 01/03 CHAPTER 002/025
00:02:25
TOTAL ELAPSED
00:25
01/13
Title Number, Total Title Number, Chapter
Number, Total Chapter Number of this
Title of the disc currently being played
will be shown on the screen, along with
the elapsed time.
(4) Press DISPLAY for the fourth time:
TOTAL REMAIN
40:35
01/13
(2) Press DISPLAY for the second time:
TITLE REMAIN
01:46:58
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
FOR CD:
(3) Press DISPLAY for the third time:
(1)Press DISPLAY for the first time:
SINGLE ELASPED
00:00:25
CHAPTER ELAPSED
00:00:24
TRACK: 01/14
(4) Press DISPLAY for the fourth time:
(2)Press DISPLAY for the second time:
CHAPTER REMAIN
00:01:39
SINGLE REMAIN
00:03:15
TRACK: 01/14
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
FOR VCD:
(3)Press DISPLAY for the third time:
TOTAL ELASPED
00:00:25
(1) Press DISPLAY for the first time:
SINGLE ELAPSED
TRACK: 01/14
00:25
01/13
19
OPERATION
(4) Press DISPLAY for the fourth time:
MONO LEFT
MONO RIGHT STEREO
TOTAL REMAIN
00:40:35
MENU FUNCTION (For DVD ONLY)
Press MENU (BAND) button on the
DVD unit or BND (MENU) button on
the remote control while the disc is
playing and the disc root menu will
be displayed. You can navigate with
the remote control navigation keys and
select a feature with the MUT/ENT
button on the DVD unit or OK button on
the remote control.
TRACK: 01/14
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
FOR MP3:
(1) Press DISPLAY for the first time:
CHAPTERELASPED 00:00:25
TITLE MENU FUNCTION (FOR DVD ONLY)
If the DVD has multiple titles recorded on
the disc. It can select preferred title from
the title menu to start playback.
1. Press ST/LOC/TITLE button on the
front panel of the DVD unit or ST/TITLE
button on the remote control during
playback.
(2) Press DISPLAY for the second time:.
- The title menu is display.
CHAPTERREMAIN 00:04:25
2. Select preferred title by the cursor
button and confirm by MUT/ENT
button on the DVD unit or OK button
on the remote control.
MULTI-SUBTITLE LANGUAGE
FUNCTION (FOR DVD ONLY)
Press SUBTITLE during playback.
Each time the button is pressed, the
subtitle language changes in sequential order.
Notes:
(3) Press DISPLAY for the third time:
The message on the screen will be cleared.
MULTI-AUDIO LANGUAGE FUNCTION
For DVD:
- The language number is different
according to the disc.
Press AUDIO button on the remote
control during playback. Each time the
button is pressed long, the audio
soundtrack language changes on
sequential order.
- Some discs only contain one subtitle
language.
- When no different subtitle language
are recorded,
will be displayed at
screen left top corner.
Notes:
- The language number is different
according to the disc.
- Some discs only contain one language
soundtrack.
MULTI-ANGLE FUNCTION (FOR
DVD ONLY)
Press ANGLE during playback.
Each time the button is pressed, the
angle changes in sequential order.
Notes:
- When no different language
soundtrack are recorded,
will be
- The angle number is different
according to the disc.
displayed at screen left top corner.
- The function only works for discs
having scenes recorded at different
angles.
- When no different angle are recorded,
will be displayed at screen left top
corner.
For VCD:
Press AUDIO button on the remote
control during playback. It is possible to
switch the sound between mono and
stereo sound.
20
OPERATION
SMART MODE FUNCTION
For example:
In DVD mode, press SMART button on
the DVD unit or SMART button on the
remote control shortly during disc
playback to activate SMART MODE
function and “SMART MODE” appears
on the display of the DVD unit. When
press MODE button to switch to radio or
AV IN mode or CDC mode, the front
speakers will output the corresponding
radio audio signal or audio signal of the
AV source or audio signal of the CDC
source, and the rear speakers will be
muted. In any mode (radio or AV IN or
CDC), the DVD disc is playing and the
video out 1 and 2 jacks output the video
signal of DVD all the while.
When you press SMART button or
SMART button shortly during disc
playback to activate SMART MODE
function. In any mode, press and hold
SMART button or SMART button for
several seconds, “SMART MODE” will
be flashing. When you press MODE
button to switch to radio or AV IN mode
or CDC mode, the front speakers will
output the corresponding radio audio
signal or audio signal of the AV source or
audio signal of the CDC source, and the
rear speakers will be muted.
SMART NAVI
ROOT
CD01
MP3 001 PLUMT
CD02
CD03
CD04
CD05
MP3 002 RZID
MP3 003 ASCIS
MP3 004 DCYI
MP3 005 BFZ
DISC
In stop mode, use
/
,
/
on the
remote control to select the item or folder
(such as CD01, CD02...), and press MUT
/ENT button on the DVD unit or OK
button on the remote control to confirm,
then select the desired track (such as
001 PLUMT, 002 RZID...) on the current
folder to play.
Pressing RPT button on the front panel
or REPEAT button on the remote control
repeatedly can select two kinds of repeat
play mode.
REP-ONE: Play the same song over and
again.
FOLDER REP: Play all songs in the
current directory in sequence, over and
again.
FOLDER: Play all songs in the current
directory once.
But when switch to AV IN mode or CDC,
the video out 1 and 2 jacks will not output
the video signal of DVD source any more.
In AV IN mode, these two jacks output
the video signal of AV IN source and in
CDC mode, there isn’t any video signal
to output from the two video output
jacks.
When PLAY MODE is selected, press /
to change between the following
mode:
SINGLE
REP-ONE FOLDER FOLDER REP
When SMART MODE is activated, press
MODE button to switch to DVD mode,
press SMART button or SMART button
to release this function.
DISC SCAN DISC
DISC REP
SHUFFLE ON PROGRAM PXXX
Pressing SHF on the front panel or
SHUFFLE button on the remote control
to play tracks in random order. Press
SHF button or SHUFFLE button again to
release the mode.
During playback, use
item ahead or back.
: Rapid reverse,
SMART NAVIGATION IN MP3 DISC
PLAY
MP3 disc is playing as the format of
FOLDER.
/
to skip an
: Rapid advance
Note: The FOLDER cannot be selected
during playing. It can be selected after
AMS (STOP) button pressed.
21
OPERATION
seconds to select a disc in random and
play the selected disc in random order.
Press it again to cancel the function.
CDC OPERATION
You can connect a CD changer to the
unit with CDC operation version only.
Information on handling CDs, inserting
CDs and operating the CD changer can
be found in the operating instructions
supplied with your CD changer.
SELECTING DISC
Press CD- button on the DVD unit to
select previous disc and CD+ button on
the DVD unit to select next disc.
SWITCHING TO CDC MODE
DVD CHANGER OPERATION
You can connect a DVD changer to the
unit with DVD changer operation version
only. Information on handling DVDs,
inserting DVDs and operating the DVD
changer can be found in the operating
instructions supplied with your DVD
changer.
Keep pressing MODE button on the DVD
unit shortly or MODE button on the
remote control until the CDC mode
display appears. Playback begins with
the first CD that the CD changer detects.
SELECTING TRACKS
Press
button on the DVD unit to move
button on
to the previous track; press
SWITCHING TO CDC MODE
Keep pressing MODE button on the DVD
unit shortly or MODE button on the
remote control until the CDC mode
display appears. Playback begins with
the first DVD that the DVD changer
detects.
the DVD unit to move to the following
track. Track number shows on display.
Hold
button or
button to fast
reverse or fast forward. CD play starts
from when you release the button.
PAUSING PLAYING
Press
button on the DVD unit or on
SELECTING TRACKS
the remote control to pause CDC player.
Press it again to resume play.
Press
button on the DVD unit to move
button on
to the previous track; press
PREVIEWING ALL TRACKS
the DVD unit to move to the following
track. Track number shows on display.
Press SCN button on the DVD unit
shortly to play first several seconds of
each track on current disc. Press and
hold SCN button on the DVD unit for
several seconds to play first several
seconds of the first track on each disc in
the CD magazine. Press it again to stop
intro and listen to track.
Hold
button or
button to fast
reverse or fast forward. DVD play starts
from when you release the button.
PAUSING PLAYING
Press
button on the DVD unit or on
the remote control to pause DVD changer
player. Press it again to resume play.
REPEATING INDIVIDUAL TRACKS OR
WHOLE CDs
PREVIEWING ALL TRACKS
Press SCN button on the DVD unit
shortly to play first several seconds of
each track on current disc. Press and
hold SCN button on the DVD unit for
several seconds to play first several
seconds of the first track on each disc in
the DVD magazine. Press it again to stop
intro and listen to track.
Press RPT button on the DVD unit shortly
to continuously repeat the same track.
Press and hold RPT button on the DVD
unit for several seconds to continuously
repeat all tracks on the current disc.
Press it again to stop repeat.
PLAYING ALL TRACKS IN RANDOM
Press SHF button on the DVD unit shortly
to play all tracks on the current disc in
random order. Press and and hold SHF
button on the DVD unit for several
22
OPERATION
REPEATING INDIVIDUAL TRACKS OR
WHOLE CDs
Press RPT button on the DVD unit shortly
to continuously repeat the same track.
Press and hold RPT button on the DVD
unit for several seconds to continuously
repeat all tracks on the current disc.
Press it again to stop repeat.
PLAYING ALL TRACKS IN RANDOM
Press SHF button on the DVD unit shortly
to play all tracks on the current disc in
random order. Press and hold SHF
button on the DVD unit for several
seconds to select a disc in random and
play the selected disc in random order.
Press it again to cancel the function.
SELECTING DISC
Press SMART (DISC) button on the
remote control to select another disc in
the DVD changer unit.
AV IN OPERATION
When you connect another audio/video
system to the unit through the AV IN
terminals on the back of the unit, press
MODE button on the front panel or
MODE on the remote control to select
AV IN mode.
23
SETUP
INITIAL SETUP
GENERAL SETUP
SETUP MENU --- MAIN PAGE
--- GENERAL PAGE ---
TV DISPLAY
PIC MODE
NORMAL / PS
NORMAL / LB
WIDE
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
PREFERENCES
EXIT SETUP
1.Press SETUP on the remote control
or on the DVD unit in the stop
mode.(Press the stop button twice to
ensure that the player is in STOP
mode.)
MAIN PAGE
TV Screen
4:3
Wide (16:9)
Video Material
Normal
Pan Scan
Letter-box
4:3
2.The initial SETUP menu is displayed.
3.Select the preferred item by using the
16:9
/
buttons.
4.Press MUT/ENT on the front panel or
TV display setup
OK button on the remote control.
This is to select the appropriate TV
aspect ratio (4:3 or 16:9) according to
the connected TV set.
a. GENERAL SETUP
This setup page includes all the
item of TV display & Audio output
feature. For details please refer to
GENERAL SETUP MENU.
Normal/PS (For 4:3 TV)
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the left
and right edges are cut off.)
b. SPEAKER SETUP
This is to activate the audio output
from DOLBY AC3 5.1 DOWNMIX
to 2 channel mode. Please refer to
SPEAKER SETUP MENU.
Normal/LB (For 4:3 TV)
Played back in letterbox style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
c. AUDIO SETUP
This setup page includes all the
items for AUDIO. Please refer to
AUDIO SETUP MENU.
Wide (For 16:9 TV)
Select when a wide-screen TV set is
connected.
d. PREFERENCES SETUP
This setup page includes all the
configuration of support feature.
For details please refer to
PREFERENCES SETUP MENU.
24
SETUP
--- GENERAL PAGE ---
--- GENERAL PAGE ---
TV DISPLAY
TV DISPLAY
PIC MODE
AUTO
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
HI-RES
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
N-FLICKER
ENGLISH
FRENCH
GERMAN
ITALIAN
PORTUGUESE
SPANISH
MAIN PAGE
MAIN PAGE
PIC mode setup
OSD LANG type setup
Select AUTO, the player PIC mode will
depend on DVD disc.
Select the preferred OSD (On Screen
Display) language by using the
buttons.
/
Select HI-RES format for best image
resolution.
Select N-FLICKER format on image or
picture with noise or distortion.
--- GENERAL PAGE ---
--- GENERAL PAGE ---
TV DISPLAY
PIC MODE
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
ANGLE MARK
OSD LANG
CAPTIONS
ON
OFF
CAPTIONS
ON
SCR SAVER
OFF
SCR SAVER
MAIN PAGE
MAIN PAGE
CAPTIONS setup
When play DVD disc, activte the
ANGLE MARK display setup
CAPTIONS feature by selecting ON and
the captions (such as the actor dialogue)
appear on the screen; deactivate this
feature by selecting OFF and the
captions will not appear.
If it is set to ON, when the multi-angle
DVD disc is playing,
(the angle mark)
will appear on the screen; if it is set to
OFF, the mark will not appear.
25
SETUP
--- GENERAL PAGE ---
AUDIO SETUP
--- AUDIO SETUP ---
TV DISPLAY
PIC MODE
SPDIF
OFF
ON
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
OP MODE
LPCM OUTPUT
DYNAMIC
ON
OFF
MAIN PAGE
MAIN PAGE
SPDIF
This is to activate the digital audio output
on or off.
SCR SAVER setup
Select the SCR SAVER ON/OFF.
SPEAKER SETUP
--- SPEAKER SETUP PAGE ---
--- AUDIO SETUP ---
SPDIF
DOWNMIX
LT/RT
STEREO
OP MODE
LINE OUT
MAIN PAGE
LPCM OUTPUT
DYNAMIC
RF REMOD
MAIN PAGE
OP MODE
- LINE OUT: Line out mode, with digital
dialog normalization.
- RF REMOD: RF remodulation mode,
with heavy compression and digital
dialog normalization.
It is recommended to select LINE OUT
mode.
This is to activate the audio output from
DOLBY AC3 5.1 DOWNMIX to 2 channel
mode. Select the preferred SPEAKER
connection by using the cursor buttons.
- Select the LT/RT to activate the Dolby
surround compatible output.
- Select the STEREO to activate simple
stereo mode.
26
SETUP
--- AUDIO SETUP ---
PREFERENCES SETUP
SPDIF
--- PREFERENCES PAGE ---
OP MODE
TV TYPE
AUTO
NTSC
PAL
AUDIO
LPCM OUTPUT
DYNAMIC
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
LOGO
LPCM 48K
LPCM 96K
MAIN PAGE
MAIN PAGE
LPCM OUTPUT
Selecting LPCM (Line Pause Code
Modulation) OUTPUT between LPCM
48K and LPCM 96K.
TV type setup
This player can play discs recorded in
either PAL or NTSC format.
Select NTSC format, when you
connected to NTSC TV.
The higher the sampling frequency is, the
better the output audio quality is. It is
recommended to select LPCM 96K.
Select PAL format, when you connected
to PAL TV.
Select AUTO format, the player TV output
format will be according to the DVD disc
format.
--- AUDIO SETUP ---
SPDIF
FULL
6/8
OP MODE
--- PREFERENCES PAGE ---
TV TYPE
LPCM OUTPUT
DYNAMIC
4/8
AUDIO
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
GERMAN
ITALIAN
2/8
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
LOGO
OFF
MAIN PAGE
DYNAMIC RANGE CONTROL
Select DYNAMIC and adjust the dynamic
range of a Dobly Digital encoded
program. There are 8 steps between full
compression and off compression.
PORTUGUESE
MAIN PAGE
AUDIO language setup
Select the preferred AUDIO soundtrack
by using the cursor buttons.
27
SETUP
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
TV TYPE
1 G
AUDIO
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
GERMAN
ITALIAN
AUDIO
2
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
LOGO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
LOGO
3 PG
4 PG 13
5
6 PG-R
7 NC-17
8 ADULT
NO PARENTAL
PORTUGUESE
OFF
MAIN PAGE
MAIN PAGE
SUBTITLE language setup
Select the preferred SUBTITLE language
by using the cursor buttons.
PARENTAL
Select suitable parental guidance by the
cursor buttons and confirmed by
pressing ENT button on the DVD unit or
OK button on the remote control.
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
AUDIO
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
LOGO
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
GERMAN
ITALIAN
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
LOGO
CHANGE
MAIN PAGE
MAIN PAGE
PORTUGUESE
PASSWORD
DISC MENU language setup
Select CHANGE and press ENT or OK
button. Type the old password (The initial
factory code is 3308) and key in 4
characters password now you want to
use, and retype again to confirm key in
correctly.
Select the preferred DISC MENU
language by using the cursor buttons.
28
SETUP
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
TV TYPE
AUDIO
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
LOGO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
RESET
DEFAULTS
SMART NAV
LOGO
ORIG LOGO
CUST LOGO
MAIN PAGE
MAIN PAGE
DEFAULTS
LOGO
Select reset to revert to factory initial
settings.
Select ORIG LOGO (original picture when
the unit turns on) or CUSTLOGO
(customer-set picture when the unit turns
on).
--- PREFERENCES PAGE ---
Note: The CUST LOGO must be in the
JPEG format. Load the picture disc into
the drive of the DVD unit, when you
select the desired picture, press
button then press TITLE button, the
current picture will be stored in the unit
and “LOGO IS COPIED” will appear on
the screen.
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
LOGO
NO MENU
WITH MENU
MAIN PAGE
SMART NAV
If selected WITH MENU mode, when
playing an MP3 disc, the smart
navigation menu will appear on the
screen, then the user can select a track
to play according to the menu hint.
If selected NO MENU mode, when
playing an MP3 disc, there is no menu to
display and it starts to play directly.
The user can adjust this item according
to one’s need.
29
SETUP
DEFAULTS TABLE
General Setup TV Display
PIC Mode
Normal/LB
AUTO
Angle Mark ON
OSD Language English
Captions ON
SCR Saver ON
Stereo
Speaker Setup Downmix
Audio Setup SPDIF
OP Mode
Dynamic
OFF
Line Out
FULL
LPCM Output LPCM 96K
Preferences TV Type
AUTO
Audio
English
English
Subtitle
DISC Menu English
Parental
NO Parental
3308
Password
Smart NAV With Menu
Logo ORIG Logo
30
TROUBLE SHOOTING
If it appears that your DVD unit is faulty,
first consult this checklist. It may be that
something simple has been overlooked.
DISTORTED SOUND FROM HIFI
AMPLIFIER
• Check to make sure that no audio
connections are made to the amplifier
phono input.
Under no circumstances should you
try to repair the player yourself, as
this will invalidate the warranty. Only
qualified service personnel can
remove the cover or service this
player.
THE PLAYER DOES NOT RESPOND
TO THE REMOTE CONTROL
• Aim the remote control directly at the
sensor on the front of the player.
• Avoid all obstacles which may interfere
with the signal path.
NO POWER
• If the power supply is connected to the
car accessory circuits, but the engine
is not moving, switch the ignition key
to “ACC”.
• Inspect or replace the remote control
battery.
DISTORTED OR B/W PICTURE
• The disc format is not according to the
TV-set used (PAL/NTSC).
• Check if the fuse is blown. Then replace
the new fuse.
• Check if the on/off button on the front
of the player is set to on.
NO AUDIO AT DIGITAL OUTPUT
• Check the digital connections
• Check the Digital Audio menu to make
sure that the digital output is correctly
set.
NO PICTURE
• Check if the monitor or TV is switched
on.
• Check if select proper mode, such as
Disc Play mode and AV mode.
• Check the video connection.
• Check if the audio format of the selected
audio language matches your receiver’s
capabilities.
DISTORTED PICTURE
BUTTONS DO NOT WORK
• Press Reset button on the housing of
the DVD unit.
• Check the disc for fingerprints and clean
with soft cloth, wiping from centre to
edge.
THE RADIO DOES NOT WORK
• Check if the antenna cable is connected
firmly.
• Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
THE RADIO STATION AUTOMATIC
SELECTION DOES NOT WORK
• If the signals are too weak, select a
station manually.
COMPLETELY DISTORTED PICTURE
• The disc format is not according to the
TV-set used (PAL/NTSC).
NO COLOR IN PICTURE
• The disc format is not according to the
TV-set used (PAL/NTSC).
DISC DOES NOT PLAY
• Ensure the disc label is upwards.
• Clean the disc.
• Check if the disc is defective by
trying another disc.
NO SOUND
• Check audio connections.
• If using a HIFI amplifier, try another
sound source.
31
SPECIFICATIONS
GENERAL
Power Supply Requirements
Chassis Dimensions
Tone Controls
: DC 12Volts, Negative Ground
: 178 (W) x 160 (D) x 50 (H)
- Bass (at 100 Hz)
- Treble (at 10 KHz)
Maximum Output Power
Current Drain
: ± 10 dB
: ± 10 dB
: 4 x 40 watts
: 15 Ampere (max.)
DVD PLAYER
Signal to Noise Ratio
Channel Separation
Frequency Response
: More than 55 dB
: More than 45 dB
: 20 Hz - 20 kHz
RADIO
FM
Frequency Coverage
IF
Sensitivity (S/N = 30 dB)
Stereo Separation
: 87.5 to 108MHz
: 10.7 MHz
: 4 µV
: > 25 dB
AM
Frequency Coverage
IF
Sensitivity (S/N = 20 dB)
: 530 to 1710 KHz
: 450 KHz
: 36 dBu
32
SPECIFICATIONS
Supply voltage:
Discs played:
Compositive video 1.0Vp-p 75Ω
(1) 5” (12 cm) DVD-VIDEO disc
(2) Compact disc (CD-DA/CD-R/CD-RW/MP3)
(3) 5” (12 cm) VIDEO CD
Note:
Specifications and design are subject to modification, without notice, due to
improvements in technology.
CAUTION:
• To avoid electric shock, this unit must not be exposed to dripping water or water
splash.
• Minimum distances around the apparatus for sufficient ventilation.
• The ventilation should not be impeded by covering the ventilation openings with
items, such as newspapers, table-cloths, curtains, etc.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• The use of apparatus in tropical and/or moderate climates.
• Before scrapping the appliance, remove the batteries and place them in the
appropriate battery collection container.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
33
88-V1623-02
|