OWNER'S MANUAL
ANTI-SHOCK CD / MP3 PLAYER
CD CHANGER CONTROL
AUXILIARY INPUT
DOT MATRIX DISPLAY
SUPER POWER OUTPUT
MOTORIZED SLIDE DOWN DETACHABLE PANEL
FM/AM BAND RADIO RECEIVER
REMOTE CONTROL
MODEL: PLCD65MP3
P / N : 570-F88902-01
SETTING CLOCK TIME MANUALLY
ꢀ Briefly press “DISP” button until clock time appear on the display.
ꢀ Press and hold the button until the clock flash and release “DISP” button.
ꢀ Whileclockisflashing, rotate“VOL/SEL”controlclockwisetosetHOURandanti-clockwisetosetMINUTE.
SETTING DANCING SPECTRUM MODE
When “DISP” button is pressed for longer than 1 second, “DANC” will show on display and following dancing
spectrum mode are available for selection by rotating “VOL/SEL” control clockwise or anti-clockwise.
7. MUTE CONTROL
Press the button to mute volume control and “MUTE ON” will appear on the display.
8. EJECT BUTTON
Press the button to eject the disc inside disc slot.
9. OPEN/CLOSE BUTTON / DETACHING PANEL BUTTON (FIGURE A)
* Press this button to show the disc slot in the main panel. Then, press once to close the disc slot.
* To detach the front panel, press this button so that the panel slide down from vertical to horizontal position.
Use thumb hold near the preset button between 3 and 4, and use other finger to hold the corrugated release
button at the back of the front panel while pulling. After the panel is released, the slide down metal frame
will automatically move backward until it locks to the original position.
* To re-attach the panel, put the front panel to the slide down metal frame by clipping it into place.
10. MODE SELECTION
Press this button to select Radio (TUNER), CD / MP3 (S-CDP), CD Changer Control (CD-C) and Auxilliary
Input (AUX) mode.
11. STEREO/MONO CONTROL
Press this button to select “STEREO” or “MONO” reception.
12. LOUD CONTROL
Press this button to activate the loudness circuitry which compensates for loss of high and low frequencies
during low volume levels.
13. LOCAL/DISTANT SELECTOR
Press this button to prevent strong local stations from overlapping weaker stations. For normal operation, press
this button again for distance.
14. VOLUME/SELECTION CONTROL
Rotate the button anti-clockwise to decrease, or clockwise to increase volume level.
AUDIO LEVEL CONTROL (WHEN PUSHING ONE AFTER ANOTHER)
Press this button shortly one after another to show VOL/BAS/TRE/BAL/FAD control.
ꢀ VOLUME - Press this button once, then rotate anticlockwise to decrease, or clockwise to increase volume level.
ꢀ BASS - Press this button once, then rotate anticlockwise to decrease, or clockwise to increase bass level.
ꢀ TREBLE - Press this button once, then rotate anticlockwise to decrease, or clockwise to increase treble level.
ꢀ BALANCE - Press this button once, then rotate anticlockwise or clockwise to level balance of speaker right and
left.
ꢀ FADER - Press this button once, then rotate anticlockwise or clockwise to level fader of speaker front and rear.
AUDIO / SETTING SELECT (WHEN PUSHING 2 SECONDS)
Whenpressingthebuttonformorethan2seconds, itactivatesasunitsettingselectionincyclicalmodeas
following. Theunitsettingcanbechangedbyrotatingthebuttonclockwiseoranti-clockwise.
ꢀ DSP OFF / POP / ROCK / CLAS / FLAT
ꢀ LOUD OFF / LOUD ON
ꢀ ESP 12s / ESP 45s (setting 12 seconds or 45 seconds of electronic anti-shock time for Audio CD)
ꢀ BEEPON/BEEPOFF(notavailableforthismodel)
ꢀ SEEK1(tuneup/downbuttonsperformsfasttunefunction)/SEEK2(tuneup/downbuttonsperformsautotuning
functionwhenpressedmorethan1second)
Page. 3
P / N : 570-F88902-01
ꢀ COLOR 1 / COLOR 2 (not available for this model)
ꢀ VOL LAST / VOL ADJ (preset volume level when unit turn on)
15/16. MANUAL UP/DOWN TUNING / TRACK SEEK UP/DOWN CONTROL
On radio mode, press the button will tune one frequency step higher or lower. Pressing the button more than 1
second can performs fast tuning function or auto tuning function.
On CD/MP3/CDC mode, press this button will locate the beginning of the track being played or will locate the
beginning of the next track. When pressing more than 2 seconds, it will move fast forward or fast backward to a
specific position of a CD/MP3 track.
17. STATION PRESET BUTTON (1-6)
The PRESET BUTTONS on the unit are used to store station frequencies which you may wish to recall. Each
preset button can store FM1, FM2, FM3, MW1, MW2 band station frequency. Pressing the button momentarily
recalls the station frequency which was memorized. There are 6 preset buttons, giving you capability of storing
18FM / 12MW.
NOTE: When the preset button to be memorized is kept pressed for more than 2 seconds, the receiving station
frequency will be stored in the button pressed. After this, the memorized station can be recalled by pressing the
button once.
On CD / MP3 / CDC Mode
ꢀ Preset 1 - press this button to pause the disc played.
ꢀ Preset 2 - press this button to scan the first 10 seconds of all the tracks on the currently selected disc.
ꢀ Preset 3 - press this button to repeat the current track of the disc.
ꢀ Preset 4 - press this button to play disc at random order - Disc shuffle play.
ꢀ Preset 5 - press this button to search previous disc numbers (for CDC Mode only).
- press this button to search -10 track (for MP3 Mode only).
ꢀ Preset 6 - press this button to search the disc numbers ahead (for CDC Mode only).
- press this button to search +10 track (for MP3 Mode only).
INSTRUCTION TO PLAY MP3 SONGS
IMPORTANT NOTES
• The MP3 file recording media acceptable to this unit are CD-R and CD-RW.
• TheMP3 formatsacceptablearelimited.
• Donot attempttoplayamediacontainingnon-MP3filesornon-MP3 fileswithMP3extension. Otherwise, the CD
Mechanism will not be working properly. If “ERROR” is shown, it is suggested to reset the radio by presssing the
resetbutton.
PLAY ON MP3 SONG
• Insert the media with MP3 song in the disc slot. The unit will start playing and checks all the files and folder on
themedia.
• If MP3 files and directories are recognized, the media will start playing.
• The MP3 files and directories are accessed according to the order written by the CD writer.
TRACK SEARCH
• Press “AMS” button once and “Track srch” will be shown on the display.
• Press“VOL/SEL”controltoentertracksearchmodeand“Track001”willappearonthedisplayforyoutoentertrack
number.
• Rotate“VOL/SEL”controlclockwiseoranti-clockwisetoshiftnumber0–9inlooprotation.
• Press“VOL/SEL”controlshortlytoselectthefirstdigit.
• Repeatthesameproceduretoentertheotherdigitsifrequired.
• Afterthetracknumberisselected, press“VOL/SEL”controlmorethan2secondstostartplayingtheselectedtrack.
• If tracknumberisnotentered within10seconds, theunit willcontinueplayingthecurrentfile.
FILES SEARCH
• Press “AMS” button twice and “File srch” will be shown on the display.
• Press“VOL/SEL”controltoenterfilesearchmode.
• Rotate“VOL/SEL”controlclockwiseoranti-clockwisetoviewthedirectories.
• Aftertheselecteddirectoryisselected, rotate“VOL/SEL”controleitherclockwiseoranti-clockwisetoviewthefiles.
• Press“VOL/SEL”controltoplaytheselectedfile.
• Ifdirectoriesorfilesnameisnotenteredwithin10seconds, theunitwillcontinueplayingthecurrentfile.
Page. 4
P / N : 570-F88902-01
CHARACTER SEARCH (OPTIONAL)
• Press “AMS” button 3 times and “Char srch” will be shown on the display.
• Press“VOL/SEL”controltoenterintocharactersearchmodeand“A”willappearonthedisplayforyoutoenterfirst
character.
• Enterwholenameoffiles(maximum8characters)byrotating“VOL/SEL”controlclockwiseoranti-clockwisetoshift
“A-Z”,“0-9”&“ ”(space)inlooprotation.
• Press“VOL/SEL”controlshortlytoselectthefirstcharacter.
• Repeatthesameproceduretoentertheothercharactersifrequired.
• Afterthewholenameoffileisentered, press“VOL/SEL”controlmorethan2secondstostartplayingtheselectedtrack.
Remark :
1)ThemediamustcontaindirectoriesorfilesnamewrittenbytheCDwriterinordertouseinsearching.
2)Ifonlypartiallettersareenteredforsearchingeitherindirectoriesorfilesname, youmaynotgetitcorrectly.
WIRE CONNECTION
CAUTION :
Do not connect the speaker wires to chassis or car body. Each speaker wire cannot be soldered together with
other wires. Otherwise, the unit will be damaged and no sound will come out anymore.
The RESET button is located in front of
RESET FUNCTION
the panel. It is recessed in order to
prevent accidental engagement, and can
be activated with the tip of a ball-point pen
or any similar pointed object. This reset
circuitry is provided in order to protect the
unit's microprocessor, and should only be
activated under the following conditions :
a) Initial installation after all wiring is
completed.
b) Abnormal operation is encountered such
as numerical indication on display is
erratic.
c) Whenever the reset button is activated,
all preset memory content will be erased
and must be reprogrammed.
Page. 5
P / N : 570-F88902-01
INSTALLATION
REMOTE CONTROL
CAUTION : DO NOT PLACE
THE UNIT OVER THE
MAXIMUM INSTALLATION
ANGLE OF 30°. OTHERWISE,
THE UNIT MAY NOT WORK
PROPERLY.
WARNING!!
Due to protection of CD Mechanism, two small
screws on the top of the unit must be released
before operate the unit. Otherwise, the CD
Mechanism can not be working properly.
UNIT REMOVAL
1. Remove Front Control Panel.
2. Slightly insert the key into the slot and
gently to release.
3. Separate the sleeve from the unit. Keep
release key in a safe place as you may
need for future removal of unit.
P / N : 570-F88902-01
Page. 6
P / N : 570-F88902-01
|