Patton electronic Telephone Accessories 07MSDTA QS User Manual

Smart-DTA™  
ISDN VoIP Telephone Adapter  
Quick Start Guide  
Important—This is a Class A device and is intended for use in a light industrial environment. It is not  
intended nor approved for use in an industrial or residential environment.  
Caution—This device is not intended nor approved for connection to the public ISDN telecommuni-  
cation network.  
Attention—Ce dispositif n'est pas prévu ni approuvé pour le raccordement au réseau de  
télécommunication public le RNIS.  
Vorsicht—Dieses Gerät ist nicht für Anschaltung an das öffentlich ISDN  
Telekommunikationsnetz genehmigt.  
Precaución—Este dispositivo no está previsto ni se ha aprobado para la conexión a la red de  
telecomunicaciones pública ISDN.  
Attenzione—Questo dispositivo non è inteso né non approvato per collegamento alla rete di  
telecomunicazione pubblica ISDN.  
Document Number: 13228U7-001 Rev. B  
Part Number: 07MSDTA-QS  
Revised: July 23, 2007  
Sales Office: +1 (301) 975-1000  
Technical Support: +1 (301) 975-1007  
 
2.0 Connect the Smart-DTA to your local network  
You must connect the Smart-DTA to an IP network that provides a DHCP server. Using the included black Ethernet  
cable, connect the Smart-DTA RJ-45 Ethernet WAN port, labeled ETH (see figure 1), to an Ethernet hub or switch  
on the same network as your PC. The Ethernet WAN interface is configured as a DHCP client.  
Smart-DTA  
DHCP  
Server  
ETH  
port  
PC  
Ethernet Hub  
or Switch  
Figure 1. Connecting the Smart-DTA to the network via a hub or switch  
Smart-DTA Quick Start Guide  
3
 
3.0 Connect the Smart-DTA to an ISDN phone  
1. Using a straight-though cable, terminated with RJ-45 connectors, connect the BRI port of your Smart-DTA  
to the S/T port of your ISDN phone, as shown below:  
ISDN  
Phone  
RJ-45, male  
RJ-45, male  
3
4
5
6
3
4
5
6
Note: Other pins are not used.  
4
Smart-DTA Quick Start Guide  
 
4.0 Start the SmartNode Discovery Tool  
1. Insert the CD included with your Smart-DTA into the CD drive on your PC.  
2. Copy the file named SNDiscovery.exe from the CD to your PC.  
3. At your PC, double-click the SNDiscovery.exe file name to activate the tool. The SmartNode Discovery Tool  
window will display the IP Address, MAC Address, Device Type (model number) and Build (software  
release) of your Smart-DTA.  
If your Smart-DTA does not appear:  
• Make sure the Smart-DTA and your PC are on the same routed subnet  
• Make sure any firewall programs on your PC are disabled  
5.0 Access the Web Browser (GUI) Interface  
1. In the SmartNode Discovery Tool window, select the line that displays the IP address of your Smart-DTA.  
Figure 2. SmartNode Discovery Tool window  
Smart-DTA Quick Start Guide  
5
 
2. Right-click the selected line, and select Webbrowser. The Login window will display.  
Figure 3. Login window  
3. Enter the username administrator. Do not enter a password. Instead simply click OK. Your web browser will  
display the Smart-DTA home page.  
Figure 4. Smart-DTA home page  
6.0 Configuring your Smart-DTA  
Once you have logged in you can use the browser-based graphical user interface (GUI) to configure and manage  
your S-DTA. The Smart-DTA home page displays three Immediate Actions buttons that allow you to store the cur-  
rent configuration state, reload the device, and restore to factory defaults. The home page also displays certain  
basic system information. You can always return to the home page by clicking Home in the navigation bar.  
6
Smart-DTA Quick Start Guide  
 
The GUI consists of the following main elements:  
The “Navigation Bar” on the left edge presents you with a menu listing giving access to the various configura-  
tion and status pages of the Smart-DTA.  
At the top of the page you see the “Current System Path” which displays the location and element currently  
presented in the main area.  
The rest of the page displays the configuration and status information for the different features of  
the Smart-DTA.  
Whenever you modify the configuration your Smart-DTA, immediately applies your  
changes.Howver, your new settings ARE NOT PERMANENTLY SAVED (in non-volatile  
memory [RAM]). To survive power failure or manual reload you must store your new  
settings in non-volatile memory. To save your changes: return to the home page and  
press the Save Current Configuration button.  
IMPORTANT  
7.0 Additional Information  
Refer to the Smart-DTA Getting Started Guide located on the CD-ROM shipped with your Smart-DTA device and  
available online at www.patton.com/manuals. For detailed information about:  
Installing, configuring, operating, and troubleshooting.  
Warranty, trademark & compliance  
The CD-ROM also includes many freeware and shareware tools, including TFTP servers, and Telnet clients.  
A.0 Customer and Technical Support  
Toll-Free VoIP support: call sip:[email protected] with a VoIP SIP client  
Online support: www.patton.com  
E-mail support: [email protected]—answered within 1 business day  
Telephone support:  
Standard: +1 (301) 975-1007 (USA), Monday–Friday: 8:00 am to 5:00 pm EST (1300 to  
2200 UTC/GMT)  
Alternate: +41 (0)31 985 25 55 (Switzerland), Monday–Friday: 8:00 am to 5:00 pm CET (0900 to 1800  
UTC/GMT)  
Fax: +1 (253) 663-5693 (USA) or +41 (0)31 985 25 26 (Switzerland)  
Smart-DTA Quick Start Guide  
7
 
B.0 Appendix—Factory default IP addresses  
Factory default IP addresses and netmask configuration.  
IP Address  
DHCP Client  
192.168.1.1  
Network mask  
n/a  
255.255.255.0  
255.255.255.0  
WAN interface Ethernet 0 (0/0)  
LAN interface Ethernet 1 (0/1)  
DHCP server address range (LAN)  
192.168.1.10-192.168.1.99  
C.0 Compliance Information  
C.1 Compliance  
EMC Compliance:  
FCC Part 15, Class A  
EN55022, Class A  
EN55024  
Safety Compliance:  
IEC 60950-1  
EN60950-1  
C.2 Radio and TV interference  
The Smart-DTA router generates and uses radio frequency energy, and if not installed and used properly—that  
is, in strict accordance with the manufacturer’s instructions—may cause interference to radio and television  
reception. The Smart-DTA router have been tested and found to comply with the limits for a Class B computing  
device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed to provide rea-  
sonable protection from such interference in a commercial installation. However, there is no guarantee that  
interference will not occur in a particular installation. If the Smart-DTA router does cause interference to radio or  
television reception, which can be determined by disconnecting the unit, the user is encouraged to try to correct  
the interference by one or more of the following measures: moving the computing equipment away from the  
receiver, re-orienting the receiving antenna and/or plugging the receiving equipment into a different AC outlet  
(such that the computing equipment and receiver are on different branches).  
8
Smart-DTA Quick Start Guide  
 
C.3 EC Declaration of Conformity  
(See section C.4 “EG-Konformitätserklärung” for German version.)  
Product Description: Smart-DTA  
The products described above in the form as delivered are in conformity with the provisions of the following  
European Directive:  
R&TTE Directive 1999/5/EC  
Guidelines of the European Parliament and the Committee for the Harmonization of the Legal Regu-  
lations of the Member States concerning radio equipment and telecommunications terminal equip-  
ment and the mutual recognition of their conformity.  
The safety advice in the documentation accompanying the products shall be obeyed.  
The conformity to the above directive is indicated by the CE sign on the device.  
The signed Declaration of Conformity can be downloaded from www.patton.com/certifications/.  
C.4 EG-Konformitätserklärung  
(see section C.3 “EC Declaration of Conformity” for English version)  
Produktbezeichnung: Smart-DTA  
Die bezeichneten Produkte stimmen in der von uns in Verkehr gebrachten Ausführung mit den Vorschriften fol-  
gender Richtlinie überein:  
R&TTE 1999/5/EG  
Richtlinie des europäischen Parlaments und des Rates zur Angleichung der Rechtsvorschriften der  
Mitgliedstaaten über Funkanlagen und Telekommunikations-Endeinrichtungen und die gegenseitige  
Anerkennung ihrer Konformität.  
Die Sicherheitshinweise in der mitgelieferten Produktdokumentation sind zu beachten.  
Die Konformität mit der oben erwähnten Richtlinie wird durch das CE-Zeichen auf dem  
Gerät bestätigt.  
Die unterzeichnete Konformitätserklärung kann heruntergeladen werden von: www.patton.com/  
certifications/.  
C.5 Authorized European Representative  
D R M Green, European Compliance Services Limited.  
Oakdene House, Oak Road , Watchfield, Swindon, Wilts SN6 8TD, UK  
Smart-DTA Quick Start Guide  
9
 
NOTES  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
10  
Smart-DTA Quick Start Guide  
 
NOTES  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
Smart-DTA Quick Start Guide  
11  
 
Copyright statement  
Copyright © 2007, Patton Electronics Company. All rights reserved.  
The information in this document is subject to change without notice. Patton Electronics assumes no  
liability for errors that may appear in this document.  
Trademarks statement  
The term Smart-DTA is a trademark of Patton Electronics Company. All other trademarks presented in this docu-  
ment are the property of their respective owners.  
Warranty  
For warranty information, refer to the Smart-DTA Getting Started Guide located on the CD-ROM that came with  
your IAD or available online at www.patton.com.  
In accordance with the requirements of council directive 2002/96/EC on Waste of  
Electrical and Electronic Equipment (WEEE), ensure that at end-of-life you separate  
this product from other waste and scrap and deliver to the WEEE collection system in  
your country for recycling.  
12  
Smart-DTA Quick Start Guide  
 

Pelco Switch FR82011 User Manual
Philips Breast Pump SCF294 02 User Manual
Philips Car Video System 3115 116 15961 User Manual
Philips Electric Shaver 6705 X User Manual
Philips Portable Multimedia Player Micro Jukebox User Manual
Philips Power Supply LR03PC12C User Manual
Philips TV Video Accessories STS1000 00 User Manual
Pioneer Computer Hardware PDA 5002 User Manual
Pioneer Stereo Receiver D2000SPL User Manual
Plantronics Headphones HL10 User Manual