Peerless Industries Projector PJRL411 User Manual

Installation and Assembly- Encore™ Projector Mount  
Protected by U.S. Patent No. 6,042,068  
Model: PJRL411  
This product contains all mounting hardware for direct attachment to a wood joist  
ceiling. Concrete anchors (accessory kit ACC200, see page 2) sold separately.  
IMPORTANT! Read entire  
instruction sheet before you  
start installation and assembly.  
This product is to be used in combination with one of several Projector Adapter  
Plates (PAP models).  
WARNING! Installer must verify  
that the ceiling will safely  
support the combined weight of  
the Base Unit, Projector Adapter  
Plate, and video projector.  
To order Projector Adapter Plates, Extension Columns, or additional mounting  
hardware call customer service at 1-800-729-0307 or 708-865-8870.  
Before you start check the parts list below to make sure all of the parts shown  
are included.  
This product is intended for use with UL  
Listed products and must be installed by a  
qualified professional installer.  
Peerless Industries, Inc., 1980 Hawthorne Avenue, Melrose Park, IL 60160  
R
A
Parts List  
Description  
Part Number  
Qty.  
*
A
B
projector mount ceiling plate  
054-1003  
1
2
washer head wood screw  
#14 x 2.5 (6mm x 65mm)  
5S1-015-C03  
C
M6 x 1 x 20mm socket head screw  
w/ flat and lock washer  
security allen wrench  
M5 x .8 x 8mm socket pin screw  
main bracket assembly  
fiber washer  
520-1029  
9
D
E
F
G
H
I
560-9646  
520-1062  
054-1044  
540-9432  
1800-375  
520-1164  
054-1050  
055-1251  
1
2
1
1
1
3
1
1
retaining collar  
J
M5 x .8 x 10mm socket pin screw  
roll adapter bracket  
J
K
interface bracket  
Note: Actual parts may appear slightly different than illustrated.  
Four .406 dia. holes provided for threaded rod  
installations. Materials and procedure for such  
installations are the sole responsibility of the installer.  
F
*
K
B
D
E
C
I
G
H
Parts G, H, and I are used only for installations that  
©2003PeerlessIndustries,Inc. Allrightsreserved.  
PeerlessisaregisteredtrademarkofPeerlessIndustries,Inc.  
EncoreisatrademarkofPeerlessIndustries,Inc.  
incorporate an extension column.  
Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.  
1 of 5  
ISSUED: 09-09-02 SHEET #: 054-9122-3 11-11-03  
For customer service call 1-800-729-0307 or 708-865-8870.  
 
Extension column applications only:  
ceiling plate  
(sold separately)  
Insert end of extension column into threaded fitting in  
ceiling plate. Tighten securely - four or five complete  
turns. Align slot in extension column with one of the  
small holes in the side of the threaded fitting. Insert  
and tighten one M5 x .8 x 10mm socket pin screw ( I )  
into hole to lock extension column to threaded fitting.  
Tighten screw allen wrench (D).  
threaded  
fitting  
I
slot  
WARNING:Forsafety, extensioncolumnmustbe  
locked to threaded fitting with screw ( I )!  
extension  
column (sold  
separately)  
Attach projector mount ceiling plate (A) with fiber  
washer (G) and retaining collar (H). Tighten retaining  
collar securely, four or five complete turns, aligning  
one hole in the side of retaining collar with slot in the  
end of extension column. From inside insert and  
tighten one M5 x .8 x 10mm socket pin screw ( I ) into  
hole in retaining collar. Tighten screw with allen  
wrench (D).  
A
Note: You may need to thread the socket pin screw  
from the outside first (approximately 3 turns) to  
loosen any buildup that may be on the threads.  
I
G
H
WARNING:Forsafety, retainingcollarmustbe  
locked to extension column with screw ( I )!  
Attach roll adaptor bracket (J) to ceiling plate (A) using four M6 x 1 x 20mm socket head security screws (C).  
Tighten using 4mm allen wrench provided. Next attach main bracket (F) using remaining fasteners (C). Tighten  
using 4mm allen wrench provided.  
IMPORTANT: Do not lose or dispose of allen wrench.  
It will be required to attach the Projector Adapter Plate.  
NOTE: Arrow indicates front of main bracket (F).  
A
C
J
F
3 of 5  
ISSUED: 09-09-02 SHEET #: 054-9122-3 11-11-03  
For customer service call 1-800-729-0307 or 708-865-8870.  
 
Note: Attach adapter plate to projector (see PAP instructions) prior to proceeding to step 5  
Note: The Projector Adapter Plate and projector you are installing may differ in appearance from the sample illustrated  
below.  
K
Place interface bracket (K) on top of adapter  
plate as shown.  
NOTE: # Notch on interface bracket indicates front of projector.  
*Notch on adapter bracket indicates front of projector.  
Rotate interface bracket until the two holes line up with two holes  
on adapter plate. Make sure that both front of interface bracket (K)  
and projector adapter plate are closely aligned.  
#
*
Fasten interface bracket (K) to adapter plate using two  
M5 socket-pin screws (E). Tighten screws (E) using  
4mm allen wrench (K).  
E
4 of 5  
ISSUED: 09-09-02 SHEET #: 054-9122-3 11-11-03  
For customer service call 1-800-729-0307 or 708-865-8870.  
 
SECURITY OPTION  
Position four tabs in interface bracket (K) behind four  
tabs in base unit. Slide forward to engage latch. BE  
SURETHATLATCHISENGAGED!  
Lock the latch by tightening M6 x 1 x 20mm socket  
head security screw (C) through hole in base unit,  
into threaded hole in latch. Tighten using 4mm  
allen wrench.  
WARNING:  
Do not lift more weight than you can handle! Use  
additional man power or mechanical lifting  
equipment to safely handle placement of the  
videoprojector!  
IMPORTANT: Allen wrench is your key for projector  
removal. Store it in a safe place.  
ceiling  
(cutaway)  
ceiling  
(cutaway)  
latch  
K
C
latch  
Final Alignment  
To adjust Yaw (swivel) for flush mounting applications: Loosen wood screws until projector mount can be rotated.  
Rotate mount to desired position and retighten screws.  
To adjust Yaw (swivel) for extension column applications: Rotate mount to desired position. Insert and tighten one  
remaining socket pin screw ( I ) into tab in projector mount ceiling plate (A) as shown below.  
To adjust pitch (forward and backward tilt), loosen the two screws on each side of the main bracket assembly (F).  
Tilt mount to desired position and tighten screws.  
To adjust roll (side to side tilt), loosen the two screws on each side of the roll adapter bracket (J). Tilt mount to  
desired position and tighten screws.  
I
Peerless offers several Projector Mounts to fit various video projectors. New Projector Mounts are continually being  
developed to meet the demands of a growing projector market. To find out if a mount is available for your particular  
projector call Peerless customer service at 1-800-729-0307 or 708-865-8870.  
5 of 5  
ISSUED: 09-09-02 SHEET #: 054-9122-3 11-11-03  
For customer service call 1-800-729-0307 or 708-865-8870.  
 

Philips Car Video System 170S9 User Manual
Philips DVD Player BDP5012 User Manual
Philips MP3 Player AJ 210 User Manual
Philips Portable DVD Player DVD634 User Manual
Philips TV DVD Combo 19MD357B User Manual
Pioneer Blu ray Player BDP LX91 User Manual
Pioneer Car Stereo System DEH 4400BT User Manual
Porter Cable Air Compressor N078948 User Manual
Pride Mobility Mobility Aid JZ SEL 7 SS User Manual
PVI Industries Water Heater PV500 44U User Manual