C1664M-A (11/05)
TW3001P Passive Single-Channel
Video Transceiver
®
The TW3001P video transceiver is a passive (no power required) single-channel balun that sends full motion video
(color/black-white) and Coaxitron® PTZ control signals over a single unshielded twisted pair (UTP) cable.
Two TW3001Ps or one TW3001P with a transceiver or active receiver are required for transmission over a single
UTP cable. The TW3001P is compatible with all Pelco twisted pair equipped cameras, enclosures, and domes.
Cable Type
CAT 3
CAT 5
CAT 5e
CAT 6
Distance (with Coaxitron)
Distance (video only)
300 ft
500 ft
750 ft
750 ft
400 ft
650 ft
1,000 ft
1,000 ft
NOTE: CAT 5e cable is recommended for optimum video performance.
10 PINS (5-/6+)
8 PINS (4-/5+)
PIN 5 +
PIN 4 -
MONITOR
FIXED CAMERA
TW3001P
VIDEO
UTP
DIRECT
CONNECTION
NOTE: A TW3001P CAN BE CONNECTED DIRECTLY INTO CAMERAS THAT DO NOT HAVE AN RJ-45 CONNECTOR.
UTP CAMERAS HAVE A10-PIN RJ-45 CONNECTOR. STANDARD RJ-45 CONNECTORS HAVE 8 PINS.
BLUE WIRE =
MONITOR
GRAY WIRE =
CAMCLOSURE
TW3001P
VIDEO
UTP
DIRECT
CONNECTION
VC-UTP BOARD
SPECTRA
MATRIX
TW3001P
VIDEO
UTP
COAXITRON
DIRECT
CONNECTION
+
-
+
-
MONITOR
Figure 1. TW3001P Basic Applications
Wire Gauge (maximum allowable)
16 AWG (1.5 mm2)
18 AWG (1.0 mm2)
Single Wire (solid)
Stranded Wire (flexible)
|