Philips Automobile Accessories MCD716 User Manual

MCD716  
Quick Start Guide  
What’s in the Box?  
You should find these items upon opening the box.  
Remote control with two  
AAA batteries  
CompositeVideo Cable  
Control Cable  
(yellow)  
Quick S1tart Guide  
2
User Manual  
FM antenna  
Quick start guide  
User manual  
 
Setting the clock  
1
In standby mode, press and hold CLOCK on the remote.  
2
When the hour digits flash,turn VOLUME-/+ on the system or press VOL +/- on the  
remote to set the hours.  
3
Press CLOCK again and the minute digits flash.Then turn VOLUME-/+ on the system or  
press VOL +/- on the remote to set the minutes.  
4
Press CLOCK again to confirm the time setting.  
Setting DVD menu options  
IMPORTANT!  
If the progressive scan feature is activated but the connectedTV does not support  
progressive signals or the cables are not connected accordingly, see the user  
manual for proper progressive scan setup or deactivate the progressive scan  
feature as below:  
1)Turn off yourTV progressive scan mode or turn on to interlaced mode.  
2) Press SYSTEM MENU on the remote to exit the system menu and then DISC  
and “1to exit progressive scan.  
DIGITAL AUDIO SETUP  
3D PROCESSING  
DIVX (R) VOD  
PICTURE SETTING  
Tip  
See chapters "Getting Started" and "System Menu Options" in the  
User Manual for detailed descriptions.  
 
Playing a disc  
1
Press OPEN •CLOSEç (ç on the remote control) to open the disc tray and load in a  
disc, then press the same button again to close the disc tray.  
Make sure the label side of the disc is facing up.  
OPEN•CLOSE  
2
Playback will start automatically. If not pressÉÅ.  
3
To stop playback, press PRESET-/9 (9 on the remote).  
Programming and tuning to radio stations  
1
Press SOURCE (TUNER on the remote) to select tuner source.  
2
Press PROGRAM on the remote for more than two seconds to program all available  
stations in order of waveband.  
3
Press PRESET+/- (¡ / on the remote) until the desired preset station is displayed.  
Playing a USB mass storage device  
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),  
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to  
work with this Hi-Fi system).  
1
Insert the USB devices USB plug into the socket  
on the set.  
2
Press SOURCE once or more (or USB on the remote control) to select USB.  
3
Play the USB’s audio files as you do with the albums/tracks on a CD,  
Notes for remote control:  
First, select the source you wish to control by  
pressing one of the source select keys on the remote  
control (DISC orTUNER, for example).  
Tip  
Detailed playback features and  
additional functions are described in the  
accompany owner's manual.  
Then select the desired function ( 2;, í, ë for  
example).  
PDCC-JS/JW-0845  
 

Pelco Camera Lens TVJ6AC 1 LPP User Manual
Philips Automobile Battery Charger SCM4327 User Manual
Philips CD Player AZ1006CD User Manual
Philips Electric Shaver 6844XL User Manual
Philips Stereo System DCB852 User Manual
Polaroid Digital Camera EZ1800 User Manual
Polycom Universal Remote EF IR11 User Manual
ProForm Home Gym PFEL799071 User Manual
PVI Industries Water Heater PV 6685 2 05 1 User Manual
PYLE Audio Computer Monitor PLHR77 User Manual