Register your product and get support at
HTS3510
HTS3520
HTS3511E
EN User manual
HI
9
Troubleshooting
18
19
Contents
10 Index
1
Notice
4
4
4
4
Copyright
About Progressive Scan
Trademarks
2
Important
Safety
Product care
Disposal of your old product
5
5
5
and batteries
6
3
4
Your home theater
Main unit
Remote control
6
6
7
Connect your home theater
Connectors
Connect to theTV
8
8
8
Connect audio fromTV or other devices 9
Connect a microphone
9
5
Use your home theater
Before you start
Choose your sound
10
10
10
10
12
12
13
13
13
Play a disc
Play from a USB storage device
More play features for disc or USB
Play from radio
Play audio fromTV or other devices
Create MP3 audio files
6
Change settings
14
14
14
15
15
15
Access the setup menu
Change general settings
Change audio settings
Change video settings
Change preference settings
7
8
Update software
Check software version
Update software from a CD-R or USB 16
16
16
Product specifications 16
EN
3
ABOUT DIVX VIDEO-ON-DEMAND: This
DivX Certified device must be registered in
order to play DivX Video-on-Demand (VOD)
content. To generate the registration code,
locate the DivX VOD section in your device
setup menu. Go to vod.divx.com with this code
to complete the registration process and learn
more about DivX VOD.
1 Notice
Copyright
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States and/
or other countries.
About Progressive Scan
Consumers should note that not all high definition
television sets are fully compatible with this
HDMI, and HDMI logo, and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC in
the United States and other countries.
product and may cause artifacts to be displayed in
the picture. In case of 525 or 625 progressive scan
picture problems, it is recommended that the user
switch the connection to the ‘standard definition’
output. If there are questions regarding ourTV set
compatibility with this model 525p and 625p DVD
player, please contact our customer service center.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, inc.
Trademarks
CLASS 1
LASER PRODUCT
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the
double-D symbol are trademarks of Dolby
Laboratories.
DivX , DivX Certified and associated logos are
registered trademarks of DivX, Inc. and are used
under license.
ABOUT DIVX VIDEO: DivX is a digital video
format created by DivX, Inc. This is an official
DivX Certified device that plays DivX video.
software tools to convert your files into DivX
video.
4
EN
•
•
Never place the product or any objects
on power cords or on other electrical
equipment.
2 Important
Read and understand all instructions before you
use your home theater. If damage is caused by
failure to follow instructions, the warranty does
not apply.
If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
Visible and invisible laser radiation when
open. Avoid exposure to beam.
Do not touch the disc optical lens inside the
disc compartment.
•
•
Safety
Risk of electric shock or fire!
Risk of overheating!
•
Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer
Care to have the product checked before
use.
Never place the product and accessories
near naked flames or other heat sources,
including direct sunlight.
Never insert objects into the ventilation
slots or other openings on the product.
Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
•
Never install this product in a confined
space. Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
Risk of contamination!
•
Do not mix batteries (old and new or
carbon and alkaline, etc.).
•
•
Remove batteries if they are exhausted or
if the remote control is not to be used for a
long time.
•
•
•
Batteries contain chemical substances, they
should be disposed of properly.
Product care
•
•
Disconnect the product from the power
outlet before lightning storms.
When you disconnect the power cord,
always pull the plug, never the cable.
•
•
•
Do not insert any objects other than discs
into the disc compartment.
Do not insert warped or cracked discs into
the disc compartment.
Remove discs from the disc compartment
if you are not using the product for an
extended period of time.
Risk of short circuit or fire!
•
Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
•
Only use microfiber cloth to clean the
product.
Risk of injury or damage to the home theater!
•
For wall-mountable products, use only the
supplied wall mount bracket. Secure the
wall mount to a wall that can support the
combined weight of the product and the
wall mount. Koninklijke Philips Electronics
N.V. bears no responsibility for improper
wall mounting that results in accident, injury
or damage.
•
For speakers with stands, use only the
supplied stands. Secure the stands to the
speakers tightly. Place the assembled stands
on flat, level surfaces that can support the
combined weight of the speaker and stand.
EN
5
Disposal of your old product
and batteries
3 Your home theater
Congratulations on your purchase, and welcome
to Philips!To fully benefit from the support that
Philips offers, register your home theater at
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
Main unit
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and do not
dispose of your old products with your normal
household waste.
a
Disc compartment
b
(Open/Close)
Opens or closes the disc compartment.
c
(Play/Pause)
Starts, pauses or resumes play.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
d
(Stop)
Stops play.
In radio mode, erases the current
preset radio station.
•
•
e
f
(Standby-On)
Switches the home theater on or to
standby.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot be
disposed with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries because correct
disposal helps to prevent negative consequences
for the environmental and human health.
SOURCE
Selects an audio/video source for the home
theater.
g
/
•
•
Skips to the previous or next track,
chapter or file.
In radio mode, selects a preset radio
station.
h
i
Display panel
Volume control wheel
6
EN
e
(Navigation buttons)
Navigate menus.
In video mode, press left or right to
fast backward or fast forward.
Remote control
•
•
•
In radio mode, press left or right to
search a radio station; press up or
down to fine tune a radio frequency.
a
b
c
d
f
INFO
Displays information about what is playing.
u
t
g
h
Playback buttons
Control playback.
SURR (Surround Sound)
Switches to surround sound or stereo
sound.
e
i
AUDIO SYNC
•
Selects an audio language or channel.
Press and hold to synchronize audio
with video. Use with +/-.
f
g
s
r
•
j
Numeric buttons
Selects an item to play.
k
l
SUBTITLE
Selects subtitle language for video.
h
i
q
p
VOCAL
Turns off or on the vocal by changing the
audio channel.
m
n
MIC VOL +/-
Increases or decreases microphone volume.
j
KARAOKE
Toggles through various karaoke options.
o
n
k
l
m
o
CREATE MP3 / ZOOM
•
•
Accesses the menu to create MP3.
Zooms into a video scene or picture.
p
q
r
SOUND
Selects a sound mode.
VOL +/-
Increases or decreases volume.
(Mute)
Mutes or restores volume.
a
(Standby-On)
Switches the home theater on or to
standby.
s
t
BACK
Returns to a previous menu screen.
b
c
OPEN/CLOSE
Opens or closes the disc compartment.
OK
Confirms an entry or selection.
REPEAT / PROGRAM
•
•
Selects or turns off repeat mode.
In radio mode, program radio stations.
u
Source buttons
•
AUDIO SOURCE: Selects an audio
input source.
d
SETUP
Accesses or exits the setup menu.
•
•
•
RADIO: Switches to FM radio.
USB: Switches to USB storage device.
DISC: Switches to disc source.
EN
7
c
HDMI OUT
Connects to the HDMI input on the TV.
4 Connect your home
theater
This section helps you connect your home theater
to aTV and other devices.The basic connections of
the home theater with its accessories are provided
in the Quick Start. For a comprehensive interactive
d
VIDEO OUT-VIDEO
Connects to the composite video input on
the TV.
e
f
AUDIO IN-AUX
Connects to the analog audio output on the
TV or an analog device.
FM ANTENNA
Connects the FM antenna for radio
reception.
Note
g
COMPONENT VIDEO OUT-Y Pb Pr
Connects to the component video input on
the TV.
• Refer to the type plate at the back or bottom of
the product for identification and supply ratings.
• Before you make or change any connections,
ensure that all devices are disconnected from
the power outlet.
Connect to the TV
Connect your home theater directly to a TV
through one of the following connectors (from
highest to basic quality video):
Connectors
Connect other devices to your home theater.
a
b
c
HDMI
Component video
Composite video
Side connectors
Option 1: Connect to the TV through
HDMI
MIC
Note
a
(USB)
Audio, video or picture input from a USB
storage device.
• If the HDTV has a DVI connector, connect
using an HDMI/DVI adapter.
b
MIC
(Cable not supplied)
Audio input from a microphone.
Back connectors
TV
a
AC MAINS~
Connects to the power supply.
b
SPEAKERS
Connects to the supplied speakers and
subwoofer.
8
EN
Option 2: Connect to the TV through
YPbPr (component video)
Connect audio from TV or
other devices
Note
Use your home theater to play audio from the
TV or other device such as a cable box.
• The component video cable or connector
might be labeled Y Cb Cr or YUV.
Tip
(Cable not supplied)
• Press AUDIO SOURCE to select the audio
output of your connection.
Component Video Out
TV
TV
Component Video In
Connect a microphone
(Microphone not supplied)
Option 3: Connect to the TV through
composite video (CVBS)
Note
• The composite video cable or connector might
be labeled AV IN, VIDEO IN, COMPOSITE or
BASEBAND.
TV
EN
9
Change surround sound mode
5 Use your home
theater
Experience an immersive audio experience with
surround sound modes.
This section helps you use the home theater to
play media from a wide range of sources.
Before you start
Press SURR repeatedly to cycle through the
available surround modes.
Check that you:
•
Make the necessary connections and complete
the setup as described in the Quick Start.
Switch the TV to the correct source for the
home theater.
Option
Description
•
MULTI-
Immersive multi-channel
CHANNEL sound for an enhanced movie
experience.
STEREO
Two-channel stereo sound. Ideal
for listening to music.
Choose your sound
This section helps you choose the ideal sound for
your video or music.
Play a disc
Change sound mode
The home theater can play a wide variety of
discs, including video, audio and mixed media (for
example, a CD-R that contains JPEG pictures and
MP3 music).
Select predefined sound modes to suit your
video or music.
1
2
Insert a disc into the home theater.
Press DISC.
»
The disc plays or the disc main menu
appears.
3
Press the following buttons to control play:
Press SOUND repeatedly to cycle through the
available sound modes.
Button
Navigation
buttons
Action
Navigate menus.
Sound mode Description
ACTION /
ROCK
Enhanced low and high-range.
Ideal for action movies and rock
or pop music.
OK
Confirms an entry or selection.
Starts, pauses or resumes play.
Stops play.
DRAMA /
JAZZ
Clear mid and high-range. Ideal
for drama movies and jazz music.
Skips to the previous or next
track, chapter or file.
/
/
CONCERT/ Neutral sound. Ideal for live
CLASSIC
concerts and classical music.
Fast backwards or fast
SPORTS
Moderate mid-range and
surround effects for clear vocals
and the atmosphere of a live
sport venue.
forwards. Press repeatedly to
change the search speed.
ZOOM
Zooms into a video scene or
picture.
NIGHT
Dynamically controlled sound
mode suitable for watching
movies at night or for non-
intrusive background music.
10 EN
Use video options
Use karaoke options
Access several useful features while viewing
video.
Access several useful features while playing
karaoke disc.
Note
Note
• Available video options depend on the video
source.
• Ensure that a microphone (not supplied) is
connected to the MIC connector on this home
theater before play.
• Set the microphone volume to the minimum
level before connecting the microphone to
prevent howling.
Button
Action
Searches slow-backward or
slow-forward. Press repeatedly to
change the search speed.
For VCD/SVCD, slow-backward
search is not available.
/
Button
Action
KARAOKE Toggles through various karaoke
options.
AUDIO
SYNC
Selects an audio language or
channel.
[Mic Off]/[Mic On] – Press
to turn on or off the microphone
output.
SUBTITLE Selects subtitle language for video.
[Vol 20] – Press
default microphone volume level.
[Echo +15] – Press
echo level.
to set the
Displays information about what
is playing.
INFO
to set the
REPEAT
Repeats a chapter or title.
[Key] – Press
to set the pitch
level that match your voice.
[Karaoke Scoring] – Press
set karaoke scoring when playback
a DVD or VCD.
Use picture options
to
Access several useful features while viewing
pictures.
MIC VOL Increases or decreases
+/-
microphone volume.
Button
Action
VOCAL
Turns off or on the vocal by
changing the audio channel.
Flips the photo vertically or
horizontally.
/
Rotates the picture counter-
clockwise or clockwise.
/
Skips to the previous or next
picture.
/
REPEAT
INFO
Repeats a single file in the folder
or repeats the entire folder.
Displays photo albums in a
thumbnail overview.
Use audio options
Access several useful features while audio is
played.
Button
Action
REPEAT
Repeats a track or the
entire disc.
EN 11
Synchronize audio with video
Play from a USB storage device
If the audio and video are not synchronized, you
can delay the audio to match the video.
The home theater is fitted with a USB connector
that allows you to view pictures, listen to music or
watch movies stored on a USB storage device.
1
Press and hold AUDIO SYNC until the
audio sync message appears on the display
panel.
1
2
Connect the USB storage device to the
home theater.
2
Press +/- within five seconds to sync the
audio with your video.
Press USB.
»
A content browser appears.
3
4
Select a file, then press OK.
Quick skip play to a specific time
Press the playback buttons to control play
(see ‘Play a disc’ on page 10).
Quick skip to a specific part of a video by
entering the time of a scene.
1
2
During video play, press INFO.
Note
Press the Navigation buttons and OK to
select:
• If the USB storage device does not fit into the
connector, use a USB extension cable.
• The home theater does not support digital
cameras that need a computer program to
display photos.
• The USB storage device must be FAT or DOS-
formatted, and Mass Storage Class compliant.
•
•
•
•
[TT Time] : Title time.
[Ch Time] : Chapter time.
[Disc Time] : Disc time.
[Track Time] : Track time.
3
Enter the time of the scene, then press OK.
Repeat play a specific section
More play features for disc or
USB
Select sections of audio or video for repeat
playback.
1
2
3
4
During playback, press INFO.
Select [Repeat AB] in the menu.
Press OK to mark the start point.
Press OK again to mark the end point.
Several advanced features are available for video
or picture playback from a disc or USB storage
device.
»
Repeat play starts.
Play a musical slideshow
•
To cancel repeat A-B, press INFO, select
[Repeat AB] > [Off], then press OK.
Play music and pictures simultaneously to create
a musical slideshow. The files must be stored on
the same disc or USB storage device.
Note
1
2
Select a music track, then press OK.
• Repeat play is only possible within a track/
chapter.
Press
BACK and go to the picture
folder.
3
Select a picture, then press OK to start
slideshow.
4
5
Press to stop slideshow.
Press again to stop music.
12 EN
Play from radio
Create MP3 audio files
The home theater can store up to 40 radio stations.
Use the home theater to convert audio CDs into
1
2
Check that the FM antenna is connected.
MP3 audio files.
Press RADIO.
1
2
Insert an audio CD (CDDA/HDCD) into
the home theater.
»
“AUTO INSTALL...PRESS PLAY’ appears
on the display panel if you have not
installed any radio stations. Press
Connect a USB storage device to the home
theater.
.
3
Press the following buttons to control play:
3
4
When audio is played, press CREATE MP3.
Select [Yes] and press OK to confirm.
Button
Action
Selects a preset radio station.
Searches for a radio station.
Fine tunes a radio frequency.
/
CREATE MP3
/
TRACK
OPTIONS
Track01
04:14
04:17
03:58
04:51
03:53
04:09
04:38
Speed
Normal
Track02
Track03
Track04
Track05
Track06
Track07
Press and hold to erase the
preset radio station.
Press to stop the installation of
radio stations.
Bitrate
128kbps
CRT ID3
Device
Yes
USB1
PROGRAM Manual: Press once to access
program mode, and press again
to store the radio station.
SUMMARY
Select Track
0
Time
00:00
Automatic: Press and hold for five
seconds to reinstall radio stations.
Select All
Start
Exit
Deselect All
Note
5
Select the settings in the [OPTIONS] panel,
then press OK.
• AM and digital radio are not supported.
• If no stereo signal is detected, you are
prompted to install the radio stations again.
• For the best reception, place the antenna away
from the TV or other sources of radiation.
•
•
•
[Speed] : Selects the write-to-file speed.
[Bitrate] : Selects the conversion quality.
[CRT ID3] : Copies information on the
tracks in the MP3 files.
[Device] : Selects the USB device
which you use to store the MP3 files.
•
Change tuning grid
6
7
Press to access the [TRACK] panel.
Select an audio track, then press OK.
In some countries, you can switch the FM tuning
grid between 50 kHz and 100 kHz. Changing
tuning grid erases all preset radio stations.
•
•
[Select All] : Selects all tracks.
[Deselect all] : De-selects all tracks.
8
Select [Start] in the menu to convert, then
press OK.
1
2
3
Press RADIO.
Press
Press and hold
or ‘GRID 10’ (100 kHz) is displayed.
.
»
A new folder is created in the USB storage
until ‘GRID 9’ (50 kHz)
device to store all the new MP3 audio files.
•
To exit the menu, select [Exit] and
press OK.
Play audio from TV or other
devices
Note
• During the conversion process, do not press
any buttons.
• DTS CDs and copy-protected CDs cannot be
converted.
• Write-protected or password-protected USB
storage device cannot be used to store MP3 files.
Press AUDIO SOURCE repeatedly to select the
audio output of the connected device (see ‘Connect
audio from TV or other devices’ on page 9).
EN 13
Change general settings
6 Change settings
1
2
3
Press SETUP.
This section helps you to change the settings of
your home theater.
Select [General Setup], then press OK.
Select and adjust the following settings:
Caution
•
[Disc Lock] : Restricts play to disc.
Password (PIN code) is required to
unlock the disc before play.
• Most of the settings are already configured
with the best value for the home theater.
Unless you have a specific reason to change a
setting, it is best to leave it at the default value.
•
•
•
[Display Dim] : Changes the brightness
of the display panel.
[OSD Language] : Selects the on-
screen display menu language.
[Screen Saver] : Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
Access the setup menu
1
Press SETUP.
The following menu appears.
»
•
•
[Sleep Timer] : Sets a sleep timer to
switch the home theater to standby
after a specific time.
[Auto Standby] : Enables or disables
auto standby. If enabled, the home
theater switches to standby after 30
minutes of inactivity (for example, in
pause or stop mode).
Symbol
Description
[General Setup]
[Audio Setup]
•
[DivX(R) VOD Code] : Displays the
DivX VOD registration code for the
home theater.
[Video Setup]
[Preference Setup]
4
Press OK to confirm your choice.
Note
2
3
Select a setup menu, then press OK.
• Before you purchase DivX videos and play
them on the home theater, register the home
VOD code.
See the following sections for information
about how to change the settings of your
home theater.
Press
BACK to return to the previous
menu, or press SETUP to exit.
Note
• You cannot change a setting that is grayed out.
14 EN
Change audio settings
Note
• The best setting is automatically selected for
the TV. If you need to change the setting,
ensure that the TV supports the new setting.
• Some video settings depend on the video
source, ensure that the disc and the TV
support the setting or feature.
1
2
3
Press SETUP.
Select [Audio Setup], then press OK.
Select and adjust the following settings:
•
•
[Speakers Volume] : Sets the volume
of each speaker to obtain the ideal
audio balance.
[Speakers Delay] : Sets the delay time
for center and rear speakers to obtain
an equal audio transmission from all
the speakers.
• For settings related to HDMI, the TV must be
connected through HDMI.
• For settings related to progressive or
component video, the TV must be connected
through Component Video.
•
•
•
[HDMI Audio] : Enables or disables
HDMI audio output for the TV.
[Audio Sync] : Sets a delay for audio
output when you play a video disc.
[Prologic II Mode] : Selects a 5.1
surround sound mode to suit your
video or music.
Change preference settings
1
2
3
Press SETUP.
Select [Preference Setup], then press OK.
Select and adjust the following settings:
•
•
[Audio] : Selects audio language for video.
[Subtitle] : Selects subtitle language for
video.
4
Press OK to confirm your choice.
Note
•
•
[Disc Menu] : Selects menu language
for video disc.
[Parental] : Restricts access to discs
that are recorded with ratings. To
play all discs irrespective of the rating,
select level ‘8’.
• For settings related to HDMI, the TV must be
connected through HDMI.
•
•
•
[PBC] : Displays or skips the content
menu for VCD and SVCD discs.
[MP3/JPEG Display] : Displays the
MP3/JPEG folders or all the files.
[Password] : Sets or changes a PIN
code to play a restricted disc. Enter
‘0000’ if you do not have a PIN or if
you have forgotten your PIN.
[DivX Subtitle] : Selects a character
set that supports the DivX subtitle.
[Version Info.] : Displays the software
version for the home theater.
Change video settings
1
2
3
Press SETUP.
Select [Video Setup], then press OK.
Select and adjust the following settings:
•
•
•
•
[TV System] : Selects a TV system that
is compatible with the TV.
[TV Display] : Selects a picture display
format to fit the TV screen.
[Picture Settings] : Selects a
predefined color setting.
[HDMI Setup] : Selects HDMI video
resolution and the wide screen display
format for the TV. The Wide Screen
Display option is only available for 16:9
wide screen TV display setting.
[Progressive] : Enables or disables
progressive scan mode.
•
•
•
[Default] : Resets the home theater to the
default settings programmed at the factory.
4
Press OK to confirm your choice.
Note
• If your preferred disc language is not available,
you can select [Others] from the list and enter
the 4-digit language code which can be found
at the back of this manual.
• If you select a language that is not available
on a disc, the home theater uses the default
language of the disc.
•
•
[HD JPEG] : Enables or disables display
of high definition JPEG images.
4
Press OK to confirm your choice.
• You cannot reset disc lock, password (PIN code)
and parental control settings to their default values.
EN 15
7 Update software
8 Product specifications
To check for new updates, compare the current
software version of your home theater with the
latest software version (if available) on the Philips
web site.
Note
• Specification and design are subject to change
without notice.
Region code
The type plate on the back or bottom of the
home theater shows which regions it supports
Check software version
1
2
Press SETUP.
Select [Preference Setup] > [Version Info.],
then press OK.
Country
Europe, United Kingdom
DVD
»
The software version is displayed.
Asia Pacific, Taiwan, Korea
Latin America
Update software from a CD-R
or USB
1
Check for the latest software version on
•
Search for your model and click on
‘software&drivers’.
Australia, New Zealand
Russia, India
2
3
4
Download the software onto a CD-R or
USB storage device.
Insert the CD-R or connect the USB
storage device to the home theater.
China
Follow the instructions on the TV to
confirm the update.
»
When complete, the home theater
automatically switches off and on again.
Playback media
•
If not, disconnect the power cord for a few
seconds and then reconnect it.
DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R
DL, CD-R/CD-RW,Audio CD,Video CD/SVCD,
Picture CD, MP3-CD,WMA-CD, DivX-CD, USB
storage device
Caution
File Format
• Do not turn off the power or remove the
CD-R or USB storage device when the
software update is in progress because you
might damage the home theater.
•
•
•
Audio: .mp3, .wma
Video: .divx, .divx ultra, .mpeg, .mpg
Picture: .jpeg, .jpg
Amplifier
•
Total output power:
•
HTS3510, HTS3511E: 300 W RMS
(30% THD)
•
HTS3520: 600 W RMS (30% THD)
Frequency response: 20 Hz-20 kHz
•
•
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
•
Input sensitivity:
•
AUX: 2 V
16 EN
Video
•
•
Weight:
•
•
Signal system: PAL / NTSC
HDMI output: 480i/576i, 480p/576p, 720p,
1080i, 1080p
•
•
Center: 0.77 kg
HTS3510. HTS3511E - Front/Rear: 0.56
kg/each
•
HTS3520 - Front/Rear: 0.68 kg/each
Cable length:
Audio
•
Sampling frequency:
•
•
•
Center: 2 m
Front: 3 m
Rear: 10 m
•
•
MP3: 32 kHz, 44.1 kHz, 48 kHz
WMA: 44.1 kHz, 48 kHz
•
Constant bit rate:
Laser specification
•
•
•
•
MP3: 32 kbps - 320 kbps
WMA: 64 kbps - 192 kbps
Type: Semiconductor laser GaAIAs (CD)
Wave length: 645 - 665 nm (DVD), 770 -
800 nm (CD)
Output power: 6 mW (DVD), 7 mW
(VCD/CD)
Beam divergence: 60 degrees.
Radio
•
Tuning range: FM 87.5-108 MHz (50/100
kHz)
•
•
•
Signal-to-noise ratio: FM 50 dB
•
Frequency response: FM 180 Hz-10 kHz
USB
•
•
Compatibility: Hi-Speed USB (2.0)
Class support: UMS (USB Mass Storage
Class)
•
•
File system: FAT12, FAT16, FAT32
Maximum memory support: < 160GB
Main Unit
•
Power supply:
•
Latin America/Asia Pacific: 110-240V,
~50-60Hz
•
China/Russia/India: 220-240V, ~50Hz
Power consumption:
•
•
•
HTS3510, HTS3511E: 60 W
HTS3520: 100 W
Standby power consumption: ≤ 0.9 W
•
•
Dimensions (WxHxD): 360 x 58 x 320
(mm)
•
Weight: 2.84 kg
Subwoofer
•
•
•
Impedance: 8 ohm
Speaker drivers: 165 mm (6.5”) woofer
Dimensions (WxHxD): 122.6 x 307 x 369
(mm)
•
•
Weight: 3.84 kg
Cable length: 3 m
Speakers
•
•
System: full range satellite
Speaker impedance: 8 ohm (center), 4 ohm
(Front/Rear)
•
•
•
Speaker drivers: 3” full range
Frequency response: 150 Hz-20 kHz
Dimensions (WxHxD):
•
•
Center: 160.9 x 95 x 92 (mm)
Front/Rear: 95 x 160.9 x 87 (mm)
EN 17
Sound
9 Troubleshooting
No sound.
•
Ensure that the audio cables are connected
Warning
and select the correct input source
(for example, AUDIO SOURCE) for the
device you want to play.
• Risk of electric shock. Never remove the
casing of the product.
No sound on HDMI connection.
•
You might not hear any sound if the
connected device is not HDCP (High-
bandwidth Digital Content Protection)
compliant or only DVI compatible. Use an
analog or digital audio connection.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
If you contact Philips, you will be asked for the
model and serial number of your product.The
model number and serial number are on the back
or bottom of your product.Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
•
Ensure that the [HDMI Audio] is enabled.
No sound from TV program.
•
Connect an audio cable from the audio
input on the home theater to the audio
output on the TV, then press AUDIO
SOURCE repeatedly to select the correct
audio source.
Distorted sound or echo.
•
Ensure that the TV volume is muted or set
to minimum if you are playing audio through
the home theater.
Main unit
Audio and video are not synchronized.
•
The buttons on this home theater do not work.
1) Press and hold AUDIO SYNC. 2) Press
+/- within five seconds.
•
Disconnect the home theater from the
power outlet for a few minutes, then
reconnect.
Play
Disc cannot be played.
Picture
•
Clean the disc.
No picture.
•
Ensure that the home theater supports the
disc (see ‘Product specifications’ on page
16).
•
Ensure that the TV is switched to the
correct source for this home theater.
•
If this happens when you change the TV
system, switch to its default mode: 1) Press
to open the disc compartment. 2) Press
the Numeric buttons’3’.
•
•
Ensure that the home theater supports the
region code of the DVD.
For DVD±RW or DVD±R, ensure that the
disc is finalized.
DivX video files cannot be played.
•
If this happens when you switch on the
progressive scan mode, switch to its
default mode: 1) Press to open the
disc compartment. 2) Press the Numeric
buttons’1’.
•
Ensure that the DivX file is encoded
according to the ‘Home Theater Profile’
with the DivX encoder.
•
Ensure that the DivX video file is complete.
No picture on HDMI connection.
DivX subtitles do not display correctly.
•
Check if the HDMI cable is faulty. Replace
•
Ensure that the subtitle file name is the
with a new HDMI cable.
same as the movie file name.
•
If this happens when you change the HDMI
video resolution, switch to its default mode:
1) Press to open the disc compartment.
2) Press the Numeric buttons ‘1’.
•
Select the correct character set: 1) Press
SETUP. 2) Select [Preference Setup].
3) Select [DivX Subtitle]. 4) Select a
supported character set. 5) Press OK.
18 EN
The contents of a USB storage device cannot be
read.
10 Index
•
Ensure that the format of the USB storage
device is compatible with the home theater
(see ‘Product specifications’ on page 16).
A
amplifier
16
•
Ensure that the USB storage device
is formatted with a file system that is
supported by the home theater (note that
NTFS is not supported).
audio
connection
language
synchronize with video
9
11, 15
12
‘No entry’ or ‘x’ sign appears on the TV.
The operation is not possible.
•
C
care
5
change settings
connect
14
audio from TV
guide
9, 13
8
microphone
other devices
TV
connectors
contact us
9
9
8
8
18
D
disc
play
10
16
6
supported discs
disposal of your product
DivX
subtitle
15
F
file formats
16
K
karaoke
microphone
9
L
language
audio
disc menu
on-screen display
subtitle
15
15
14
15
M
MP3
create MP3 files
13
EN 19
O
T
overview
connectors
time search video
troubleshooting
TV
12
18
8
6
7
main unit
remote control
audio from TV
connect
9, 13
8
P
password
picture
15
U
USB
slide show
troubleshooting
play
12
18
play
12
16
software update
disc
options
radio
troubleshooting
USB storage device
product care
product specifications
progressive scan
10
10
13
18
12
5
V
video
options
settings
synchronize with audio
11
15
12
16
4
R
radio
play
program
tune
13
13
13
tuning grid
recycle
region code
remote control
repeat
13
6
16
7
10, 12
S
safety
5
settings
general
14
15
15
15
15
parental control
preferences
restore factory settings
video
slideshow
play musical slideshow
software
12
update
version
16
16
sound
mode
10
10
18
surround
troubleshooting
subtitle
language
11
20 EN
|