Always there to help you
Register your product and get support at
SB365
Question?
Contact
Philips
User manual
Contents
1 Important
2
Safety
2
2 Your Bluetooth speaker
Introduction
3
3
3
4
What's in the box
Overview of the speaker
3 Get started
Power supply
Turn on
5
5
5
4 Play from Bluetooth-enabled devices 6
Connect a device
Play from Bluetooth device
Clear the pairing information
6
7
7
5 Other features
Charge your mobile devices
Listen to an external device
Adjust volume
7
7
7
8
6 Product information
8
8
Specifications
7 Troubleshooting
General
9
9
About Bluetooth device
10
8 Notice
10
Disposal of your old product and
batteries
11
EN
1
l Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
1 Important
Safety
m Battery usage CAUTION –To prevent
battery leakage which may result in bodily
injury, property damage, or damage to
the unit:
Warning
• Never remove the casing of this speaker.
• Never lubricate any part of this speaker.
• Never place this speaker on other electrical equipment.
• Keep this speaker away from direct sunlight, naked
flames or heat.
•
•
•
Install all batteries correctly, + and - as
marked on the unit.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
Remove batteries when the unit is not
used for a long time.
Important safety instructions
n Battery shall not be exposed to excessive
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
heat such as sunshine, fire or the like.
o Apparatus shall not be exposed to
dripping or splashing.
p Do not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
q Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
h Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
Note
• The type plate is located on the bottom of the
apparatus.
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
j Only use attachments/accessories
specified by the manufacturer.
k Unplug this apparatus during lightning
storms or when unused for long periods
of time.
2
EN
2 Your Bluetooth
speaker
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
Introduction
With this product, you can
•
play audio from Bluetooth-enabled devices,
or other external devices;
•
charge your mobile devices.
What's in the box
Check and identify the contents of your
package:
•
•
•
Main unit
Power adaptor
Audio-in cable
Short user manual
•
•
EN
3
Overview of the speaker
b
c
d
a
d
e
f
g
a NFC
d -VOL/VOL +
•
Connect a device with NFC feature
•
Adjust volume.
through Bluetooth.
e CHARGING
b
c
•
Charge mobile devices.
•
•
Bluetooth indicator.
f AUDIO IN
•
Connect an external audio device.
Turn on the speaker or switch to
standby mode.
g DC IN
•
Connect power.
•
•
•
Disconnect the paired device.
Enter Bluetooth pairing mode.
Clear Bluetooth pairing information.
4
EN
Option 2:AC power
3 Get started
Caution
Always follow the instructions in this chapter in
sequence.
• Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the speaker.
• Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Power supply
Connect the power adaptor to:
Either AC power or battery can be used as
power supply of this product.
•
the DC IN socket at the back of the
speaker.
•
the wall outlet.
Option 1: Battery power
Caution
• Risk of explosion! Keep batteries away from heat,
sunshine, or fire. Never discard batteries in fire.
• Batteries contain chemical substances, so they should
be disposed of properly.
Note
Turn on
• Batteries are not supplied with the accessories.
• If battery is low, the button flashes when the speaker
is turned on.
Press .
» The speaker switches to Bluetooth
mode.
To install the batteries:
» The Bluetooth indicator begins to flash.
1 Open the battery compartment.
2 Insert 4 AA batteries with correct polarity
Switch to standby mode
(+/-) as indicated.
3 Close the battery compartment.
The speaker switches to standby mode in the
following situation:
•
•
Press again;
The connection with Bluetooth device or
other device is invalid for 15 minutes; or
Music playback is stopped for 15 minutes.
•
EN
5
» After successful pairing and connection,
the speaker beeps twice, and the
4 Play from
Bluetooth-
Bluetooth indicator turns solid blue.
To disconnect the Bluetooth-enabled device:
•
•
•
Press and hold for 3 seconds;
Disable Bluetooth on your device; or
Move the device beyond the
communication range.
enabled devices
With this product, you can listen to audio from
Bluetooth-enabled devices.
To reconnect the Bluetooth-enabled device:
•
•
Next time you turn on the speaker, the
speaker will reconnect the last connected
device automatically; or
On your Bluetooth device, select “PHILIPS
SB365“ on your Bluetooth menu to start
connection.
Connect a device
Note
To connect another Bluetooth-enabled device:
• Make sure that your Bluetooth device is compatible
with this speaker.
• Before pairing a device with this speaker, read its user
manual for Bluetooth compatibility.
• The speaker can memorize a maximum of 4 paired
devices.
1 Press and hold for 3 seconds to
disconnect the currently connected device;
» The speaker enters Bluetooth pairing
mode.
• Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
2 Connect another Bluetooth device.
• Any obstacle between this speaker and a Bluetooth
device can reduce the operational range.
• Keep away from any other electronic device that may
cause interference.
Connect a device through NFC
Near Field Communication (NFC) is a
technology that enables short-range wireless
communication between various NFC
compatible devices, such as mobile phones and
IC tags.
Connect a device manually
If your Bluetooth device supports NFC, you can
connect it with this speaker easily.
Note
1 Press on the speaker.
» The Bluetooth indicator begins to
flash.
• The operational range between this speaker and a
Bluetooth device is approximately 10 meters (30 feet).
1 Press on the speaker.
» The Bluetooth indicator begins to
flash.
2 Enable the NFC feature on your Bluetooth
device (see the user manual of the device
for details).
3 Touch the NFC tag on the speaker with
2 On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
(refer to the user manual of the device).
the back of your Bluetooth device.
3 When [Philips SB365] is displayed on
your device, select it to start pairing and
connection. If necessary, enter default
password “0000”.
6
EN
5 Other features
Charge your mobile devices
With this speaker, you can charge your mobile
devices through the CHARGING socket.
4 On your Bluetooth device, accept the
pairing request with "SB365". If necessary,
input "0000" as the pairing password.
Note
• The USB socket is used for charging only.
5 Follow the on-screen instructions to
complete the pairing and connection.
» After successful pairing and connection,
the speaker beeps twice, and the
•
In AC power supply mode, connect to
your mobile device with a USB cable (not
supplied).
Bluetooth indicator turns solid blue.
» Once the device is recognized, the
charging starts.
LED indicator
Description
Flashing blue
Connecting or waiting for
connection
Solid blue
Connected
Play from Bluetooth device
CHARGING
After successful Bluetooth connection, play
audio on the Bluetooth device.
» Audio streams from your Bluetooth
device to the speaker.
Clear the pairing information
In Bluetooth mode, press and hold for 8
seconds.
Listen to an external device
» All the Bluetooth pairing information
is erased.
With this speaker, you can also listen to an
external audio device such as an MP3 player.
EN
7
Note
6 Product
information
• Make sure that there is no Bluetooth connection, or
music playback through Bluetooth is paused.
Note
1 Connect the supplied audio input cable to
•
the AUDIO IN socket on this speaker,
• Product information is subject to change without prior
notice.
and
•
the headphone socket on the external
device.
Specifications
Amplifier
Rated Output Power
Signal to Noise Ratio
AUX Input
2 X 4 W RMS
> 65 dBA
600 mV
Bluetooth
Bluetooth version
Supported profiles
Range
V4.0
A2DP,AVRCP
10 m (Free space)
General information
Power Supply
- AC Power
2 Play audio on the external device (refer to
its user manual).
Brand name: PHILIPS;
Power adapter A:
(power adapter)
Adjust volume
Model: OH-
1015A0901660U1-UL;
Input: 100-240V~,
50/60 Hz, 350 mA;
Output: 9V 1.66 A;
Power adapter B:
Model: TPA103B-
15090-US;
During play, press VOL + or -VOL to increase
or decrease volume.
Note
• When the volume reaches the minimum or maximum,
the button flashes for one second.
Input:AC100-240V~,
50/60 Hz, 1.1A MAX;
Output: 9V 1.66 A;
4 x 1.5V LR6 AA
- Battery
8
EN
ChargingVoltage
and Current
Operation Power
Consumption
Dimensions - Main
Unit (W x H x D)
Weight - Main Unit
5V 1 A
12 W
7 Troubleshooting
Warning
• Never remove the casing of this device.
201 x 101 x 35 mm
0.5 kg
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support).When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
General
No power
•
•
•
•
Make sure that the AC power plug of the
unit is connected properly.
Make sure that there is power at the AC
outlet.
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
Replace the battery.
No sound
•
Adjust volume on the speaker or the
Bluetooth-connected device.
•
Make sure that your Bluetooth device is
within the effective operational range.
No response from the unit
•
•
•
•
Take out the batteries and turn on the unit
again.
Disconnect and reconnect the AC power
plug, then turn on the unit again.
Make sure that AC power is connected
properly.
Make sure that there is power at the AC
outlet.
EN
9
8 Notice
About Bluetooth device
The audio quality is poor after connection
with a Bluetooth-enabled device.
Any changes or modifications made to this
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment.
•
The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between them.
Notice for the USA and Canada
Cannot connect with the device.
This device complies with Part 15 of the FCC
Rules and license-exempt RSS standard of
Industry Canada. Operation is subject to the
following two conditions:
•
The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.
This product is already connected with
another Bluetooth-enabled device.
•
1 this device may not cause harmful
Disconnect that device and then try again.
interference, and
2 this device must accept any interference
received, including interference that may
cause undesired operation.
The paired device connects and disconnects
constantly.
•
The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between them.
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.This equipment generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications.
•
For some devices, Bluetooth connection
may be deactivated automatically as a
power-saving feature.This does not indicate
any malfunction of this product.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
•
•
Relocate the receiving antenna.
Increase the separation between
equipment and receiver.
•
•
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
RF Radiation Exposure Statement: This
equipment complies with FCC’s and IC’s RF
10 EN
radiation exposure limits set forth for an
uncontrolled environment.The antenna(s)
used for this transmitter must be installed and
operated to provide a separation distance of
at least 20 cm from all persons and must not
be collocated or operating in conjunction with
any other antenna or transmitter. Installers must
ensure that 20cm separation distance will be
maintained between the device (excluding its
handset) and users.
packaging materials, exhausted batteries and old
equipment.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by WOOX
Innovations is under license.
CAN ICES-3(B)/NMB-3(B)
Disposal of your old product
and batteries
The N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
Your product contains batteries, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries.The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
additional information on a recycling center in
your area.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
EN 11
Specifications are subject to change without notice.
2014 ©WOOX Innovations Limited.All rights reserved.
Philips and the Philips’ Shield Emblem are registered
trademarks of Koninklijke Philips N.V. and are used byWOOX
Innovations Limited under license from Koninklijke Philips N.V.
SB365_37_UM_V3.0
|