LX7500R/05
Quick use guide
Supplied accessories
1
1
1
1
2
1
3
3
3
3
3
3
4
5
6
7
!
9
0
8
Your DVD recorder system is delivered with
7 1 FM antenna cable
1 2 front, 1 centre and 2 rear speakers (see page 2)
2 1 subwoofer
8 1 cinch audio cable (red and white plugs)
9 1 digital audio cable (black plugs)
3 6 speaker cables
4 1 remote control with 2 AA batteries
5 1 Scart cable
0 1 ComponentVideo cable (red, green and blue plugs)
! 1 MW loop antenna
6 1TV antenna cable
Discs for recording
✔
✔
1
Speakers
Center
Front left
Front right
Center
Front left
Front right
Subwoofer
Subwoofer
Rear right
Rear left
Rear left
Rear right
Connections
➜ User manual: see pages 12–16
TV
FM
antenna
cable
antenna
cable
FOR PLAYBACK
VIDEO OUT COMPONENT
After finishing all other connections connect
the mains cable to the wall socket.
3
LX7500R/05
Quick use guide
Initial installation
Menu Language
English
Español
Français
Italiano
Deutsch
TV
ON
Press OK to continue
1 Insert the batteries into the remote
2 Switch on yourTV.
4 Press 4, 3 to select the language in which
the display messages should appear on
theTV screen. Next, press OK.
control.
3 Press DVD/MON to switch on the
DVD recorder system.
IS TV ON?will be displayed on the
DVD recorder system.
If the previous menu does not appear, set the
TV to the correct audio/video channel for the
DVD recorder system. Such channels may be
called AUX or AUXILIARY IN,AUDIO/VIDEO
or A/V IN, EXT1, EXT2 or EXTERNAL IN, etc.
These channels are often near channel 00.
Audio language
Subtitle language
English
Español
Français
Italiano
Deutsch
English
Español
Français
Italiano
Deutsch
Press OK to continue
Press OK to continue
5 Press 4, 3 to select the language in which 6 Press 4, 3 to select the language in which
a DVD should preferably be played. Next,
subtitles should preferably be displayed.
press OK.
Next, press OK.
TV shape
Country
If you have connected
the aerial -
press OK
4:3 letterbox
4:3 panscan
16:9
Austria
Belgium
Denmark
Finland
France
To continue
Press OK
Press OK to continue
Press OK to continue
7 Press 4, 3 to select the screen format.
This setting will have an effect only with
DVDs supporting different screen formats.
Next, press OK.
8 Press 4, 3 to select the country where
you use the DVD recorder system. Next,
press OK.
9 Make sure theTV antenna or cableTV
system is connected to the DVD recorder
system. Next, press OK.
Installation
Autoinstall
Autoinstall
Autoinstall complete
48 Channels found
Searching for TV channels
12 Channels found
Time
Year
18:03
2004
03
Month
Date
25
To continue
Press OK
Please wait
➜ The DVD recorder system will search
for availableTV channels.This may take
several minutes.
10 Check the time and date. If necessary,
use 4, 3, 1, 2 to set the time/date
correctly. Next, press OK.
➜ TheTV screen will turn blank for about
1/2 minute. Next, the DVD screen will
appear.
The DVD recorder system is ready for
use!
4
Playing a disc
1 Press and hold DVD/MON for 1 second.
5 If playback does not start automatically,
0 To select one of the available surround
modes, press SURR. repeatedly.The
selected surround mode will be displayed
on the DVD recorder system.
press PLAY 2 to start playback.
2 Press OPEN/CLOSE / on the set to
open the drawer.
0 To interrupt playback press PAUSE ;.
0 To resume playback press PLAY 2.
6 To stop playback, press STOP 9.
3 Insert a disc (printed side up) in the tray.
4 Press OPEN/CLOSE / on the set to
close the drawer.
Playing a radio station
Make sure the FM radio antenna is
connected to the DVD recorder system.
When you pressTUNER for the first time,
the DVD recorder system will search for
radio stations automatically.The search will
take a couple of minutes.
–
1 Press and holdTUNER for 1 second to
2 Press CH+ or CH repeatedly to skip to
select the radio tuner.
a preset radio station.
Or use 0–9 to enter the number of a
preset radio station.To enter a preset
number with two digits, press 0–9 twice
within 2 seconds.
Selecting a source
DVD selects the disc inserted into the
DVD recorder system (DVD, DVD+RW,
DVD+R,Video CD, SuperVideo CD,
Audio CD, MP3-CD). Playback will start
automatically or a menu/information
screen will appear on theTV screen.
SAT, CAM1/2, CD, CDR/TAPE,
VCR/GAME select connected equipment
(satellite receiver, CD player or similar).
With SAT, CAM1/2,VCR/GAME select
the video equipment from which you wish
to record. E. g.To record a satellite
programme, first select SAT, then press
REC/OTR.
MON (“Monitor”) shows theTV channels
stored in the DVD recorder system. Press
With the “source buttons” you select what
you want to play and what to record.
–
CH+ or CH to select theTV channel
Press and hold a source button for
1 second to select a source.
which you wish to record.
TV plays the sound of your televison set
on the speakers of the DVD recorder
system.
5
Quick use guide
LX7500R/05
Recording aTV programme
TV
ON
1 Switch yourTV set on. If necessary set the 2 Insert a DVD+RW or DVD+R disc on
3 Press DVD/MON to see theTV channel
currently selected on the DVD recorder
system.
TV to the correct audio/video channel for
the DVD recorder system. Such channels
may be called AUX or AUXILIARY IN,
AUDIO/VIDEO or A/V IN, EXT1, EXT2
or EXTERNAL IN, etc.These channels are
often near channel 00.
which you want to record into the tray.
–
4 Press CH+ or CH to select the
5 Keep REC/OTR pressed until
SAFE RECOis displayed on the DVD
recorder system.
0 To interrupt recording press PAUSE ;.
0 To resume recording press PAUSE ; again.
6 Press STOP 9 to stop recording.
TV channel (programme number) which
you wish to record.
➜ Recording starts at the end of all
existing recordings.
Note for DVD+RWs: If you press REC/OTR
briefly, the recording will start at the position
where you stopped playback. Previous
recordings may be overwritten.
Selecting a recording mode
recording
mode quality
time
M1
M2
M2x
M3
M4
M6
M8
better than DVD
DVD
better than S-VHS
S-VHS
better thanVHS
VHS
VHS (longplay)
1 hour
2 hours
1
2 ⁄2 hours
3 hours
4 hours
6 hours
8 hours
The recording mode determines the
picture quality of a recording and the
maximum time available for recording on a
disc.
3 While you press and hold SHIFT, press
REC / PLAY MODE repeatedly to select
the recording mode.
1 Press and hold DVD/MON for 1 second.
2 Press STOP 9 to stop playback or
recording.
W
3103 605 2255.5
VieChr0445
|