Philips Electric Shaver 1059X User Manual

Rechargeable  
CordlessTripleheader Razor  
1090X  
1060X  
1059X  
1050X  
Register your product and get support at  
 
2
ENGLISH 4  
Congratulations on your purchase and  
welcome to Philips Norelco!  
To fully benefit from the support that Philips  
Norelco offers, register your product at  
¡Felicitaciones en su compra y recepción  
a Philips Norelco!  
Beneficiar completamente de la ayuda  
que las ofertas de Philips Norelco, colocan  
 
4
ENGLISH  
ENGLISH  
5
IMPORTANT SAFETY  
plugged in. For assistance call 1-800-243-3050.  
4. Keep the razor, charging stand/pod, cord and charging plug away  
from heated surfaces.  
5. Never drop or insert any object into any opening.  
6. Do not charge razor or plug in charging stand/pod outdoors  
or operate where aerosol (spray) products are being used or  
where oxygen is being administered.  
INSTRUCTIONS  
When using an electric appliance, basic precautions should always  
be followed, including the following:  
Read all instructions before using this appliance.  
7. Do not use this razor with a damaged or broken comb, as facial  
injury may occur.  
8. Always put razor in stand/pod first, attach cord to stand/pod,  
then plug into outlet. Be certain plug is inserted firmly into  
charging stand/pod, up to mark indicated on plug.To disconnect,  
remove charging plug from outlet.  
9. Never put the razor in direct sunlight or store in a pouch or  
charging pod at a temperature above 140°F.  
10.Razor can be rinsed under running tap water. Do not charge or  
operate razor until fully dried.  
DANGER  
To reduce the risk of electric shock:  
1. Do not reach for a razor or corded charging stand/pod that has  
fallen into water. Unplug immediately.  
2. Use razor only in dry condition. Do not use a razor or corded  
charging stand/pod while bathing or in a shower.  
3. Do not submerge razor in water.  
4. Do not place or store a razor or charging stand/pod where it  
can fall or be pulled into a tub or sink. Do not place or drop a  
razor or charging stand/pod into water or other liquid.  
5. Always unplug this charging stand/pod from the electrical  
outlet immediately after use, except when razor is (re)charging.  
6. Unplug and remove power supply cord from charging stand/pod  
before cleaning.  
11.To prevent possible damage to the cord, do not wrap cord  
around the razor or charging stand/pod.  
SAVETHESE  
INSTRUCTIONS  
IMPORTANT: The power plug contains a transformer. Do not  
cut off the power plug to replace it with another plug, as this will  
cause a hazardous condition.  
WARNING  
To reduce the risk of burns, fire, electric shock, or injury  
to persons:  
1. Close supervision is necessary when this razor/charging  
stand/pod is used by, on, or near children or invalids.  
2. Use this razor for its intended household use as described in  
this manual. Do not use attachments not recommended by  
Philips Electronics North America Corporation.  
3. Never operate this razor/charging stand/pod if it has a damaged  
cord or charging plug, if it is not working properly, if it has  
been dropped or damaged, or dropped into water while  
 
6
ENGLISH  
ENGLISH  
7
Table of Contents  
Features.........................................................8-9  
Multi-Purpose Display...........................10-14  
Charge Meter...............................................14  
Before First Use.....................................14-15  
Charging...................................................15-18  
Recharging.....................................................18  
Quick Charge ...............................................18  
Put ItToTheTest & ShavingTips........18-19  
45 - DAY MONEY-BACK GUARANTEE  
To enjoy the closest and most comfortable shave from your new Philips Norelco  
Men’s Razor, the razor should be used exclusively for 3 weeks. This allows your  
hair and skin enough time to adapt to the Philips Norelco Shaving System. If, after  
that period of time, you are not fully satisfied with your Philips Norelco Men’s  
Razor, send the product back along with dated sales receipt and we’ll refund you  
the full purchase price. The razor must be shipped prepaid by insured mail,  
insurance prepaid, and have the original sales receipt, indicating pur-  
chase price and the date of purchase, enclosed. We cannot be respon-  
sible for lost mail. The razor must be postmarked no later than 45 days from  
the date of purchase. Philips Norelco reserves the right to verify the purchase  
price of the razor and limit refunds not to exceed suggested retail price.  
To obtain money-back guarantee return authorization form, call 1-800-243-3050  
for assistance. Please allow 4-6 weeks for delivery of check.  
How to Shave  
With Razor..............................................19-20  
Trimming..................................................20-21  
Travel Lock ..............................................21-22  
Cleaning....................................................22-26  
Replacing Razor Head  
Assembly..................................................26-27  
Maintenance..................................................27  
Storage............................................................28  
Assistance......................................................29  
Accessories ...................................................30  
Warranty........................................................31  
 
8
ENGLISH  
ENGLISH  
9
Features  
Precision Tube  
Trimmer  
Flex & Pivot Action  
Automatic  
WorldwideVoltage  
100V to 240V AC  
Razor Head  
Assembly  
• Hair Chamber  
captures shaven hair  
Cleaning Brush  
Power Pod  
Quick Clean System  
Protective Razor  
Head Cap  
Charging Stand  
Rechargeable 1-hour  
Full Charge for up to  
21 days of cordless  
shaving time  
Electronic  
On/Off Button  
Model 1090X  
Multi-Purpose  
Display  
• Shows remaining  
power level in  
batteries  
(1059/1060X)  
or actual remaining  
shaving minutes  
(1090X)  
Quick Charge  
Cordless - To shave  
without a cord  
Full 2-Year Warranty  
Model 1060X  
Model 1059X  
45-Day Money-Back  
Guarantee  
• Battery Charge,  
Full & Low Indicators  
How the Unique Philips Norelco  
Lift and Cut  
Shaving System Makes Close Comfortable:  
Travel Lock  
Replacement Razor Head  
Assembly Indicator  
Model 1050X  
Automatic Cleaning Indicator  
Groove channels  
beard closer to  
Lifter raises hair  
Slots to cut long  
hairs  
Holes to cut short  
hairs even closer  
• Indicates razor heaDdoswsnhlooaudldfrobme Wclewawn.Sedomanuals.com. All Manuals Search And Download.  
cutting system  
10 ENGLISH  
ENGLISH 11  
Multi-Purpose Display  
symbol. Both the minutes indication and plug  
Remove any sticker or protective foil from  
the display before using razor.  
symbol will start blinking. The display shows an  
increase in shaving minutes from 0 to 65.  
Depending on the razor model, there are 3  
different types of displays:  
-Models 1060X and 1059X  
C
As soon as you connect the power cord  
to an electrical outlet, the display goes on.  
The plug symbol and bottom arrowheads on  
the display will blink.As charging continues,  
more and more arrowheads will blink to  
indicate what level the batteries have been  
charged.  
Display for Model 1090X  
C
C
Display for Models 1060X and 1059X  
-Model 1050X  
C
C
As soon as you connect the power cord to  
an electrical outlet, the display goes on.The  
battery symbol will blink during charging.  
Display for Model 1050X  
C
Full Charge Indicator  
-Model 1090X  
When batteries have been fully charged, the  
minutes indication appears on the display and  
the plug symbol goes off.  
The display provides the following  
information:  
When you turn the razor ON or OFF the  
display will come on for approximately 10  
seconds.  
-Models 1060X and 1059X  
C
C
When batteries have been fully charged, all  
arrowheads and charge level lights light up  
continuously and the plug symbol goes off.  
Charging Indicator  
-Model 1090X  
As soon as you connect the power cord to  
an electrical outlet, the display goes on. The  
minutes indication appears as well as the plug  
C
When you turn the razor ON, the arrowheads  
at the top of the display light up to indicate the  
razor is fully charged.  
 
12 ENGLISH  
ENGLISH 13  
-Model 1050X  
When the batteries have been fully charged,  
the battery symbol lights up continuously.  
level blink. When you turn the razor OFF the  
C
battery symbol and the arrowheads of the  
bottom charge level continue to blink for a few  
seconds.  
Remaining Battery Capacity  
-Model 1090X  
The number on the display shows remaining  
shaving time in minutes.  
-Model 1050X  
C
C
When the battery is almost empty (5 or less  
shaving minutes left), the battery symbol lights  
up red. When you turn the razor OFF the  
battery symbol blinks for a few seconds.  
C
C
Cleaning Indicator  
-Models 1060X and 1059X  
For optimal shaving performance, we  
recommend cleaning the razor after EACH use.  
The blinking faucet symbol will remind you the  
Razor Head Assembly needs to be cleaned.  
This happens after each shave.  
The amount of charge level arrowheads indicates  
the amount of charge remaining in batteries.  
- When the top arrowheads on the display are  
lit, the battery is 100% charged.  
- When only the bottom arrowheads on the  
display are lit, 20% of the battery capacity  
is left.  
Replacement Razor Head Assembly Indicator  
Every year, depending on your shaving behavior,  
after turning the razor OFF, the replacement  
head assembly symbol indicator starts to blink  
(Model 1090X only, you will also hear a beep).  
The replacement head symbol will remain visible  
for the next 7 shaves to remind you that with  
new shaving heads you will guarantee yourself  
optimal shaving performance.  
C
C
Low Battery Indicator  
-Model 1090X  
C
C
When the battery is almost empty (5 or less  
shaving minutes left), the minutes indication  
and plug symbol will blink. When you turn the  
razor OFF the shaving minutes and plug symbol  
continue to blink for a few seconds. You will  
hear a beep when there are no minutes left.  
If the display shows a blinking replacement head  
assembly symbol and faucet symbol with  
exclamation mark, clean the razor thoroughly  
before continuing to shave (see ‘Cleaning’).  
After cleaning, if the blinking replacement  
-Models 1060X and 1059X  
When the battery is almost empty (5 or less  
shaving minutes left), the battery symbol blinks  
red and the arrowheads of the bottom charge  
 
14 ENGLISH  
ENGLISH 15  
Important  
head assembly symbol and faucet symbol with  
exclamation mark remain on the display,  
immediately replace the Razor Head Assembly  
(see ‘Replacing Razor Head Assembly’).  
Only use the power cord and charging stand  
or power pod provided to charge  
the razor.  
Charge Meter  
The power plug transforms 100-240V AC to  
less than 24V DC.  
Charge Meter monitors amount of remaining  
battery power (Models 1060X and 1059X)  
and actual shaving minutes (Model 1090X)  
available. ‘Minutes Left’ or remaining  
battery capacity is based on the amount of  
power consumed shaving per minute and is  
dependent upon your skin and beard type,  
whether you use pre-shave lotion, and how  
often the trimmer is used.  
Initially your razor may need to go through  
2 or 3 full charge/recharge cycles before  
‘Minutes Left’ (Model 1090X) or remaining  
battery capacity indicators (Models 1060X  
and 1059X) begins to display your accurate  
shaving minutes left.  
Do not attempt to disassemble the Razor  
Head Assembly to individually clean each  
cutter and comb. The individual shaving heads  
are not removable.  
Travel Lock  
The razor is equipped with a travel lock function.  
You can use the travel lock function when you are  
going to store the razor for a longer period or if  
you are going to take the razor with you when  
traveling. See Travel Lock’ section for instructions  
on how to use this function.  
Charging  
Before First Use  
Charging or recharging at temperatures below  
40ºF or higher than 95ºF adversely affects  
lifetime of batteries.  
Always unplug this charging stand/pod from  
the electrical outlet immediately after use,  
except when razor is (re)charging.You can  
store the razor in the charging stand or  
power pod.  
Charge the razor before you start using  
it (see ‘Charging’). Make sure the razor is  
switched off before you start charging it.  
Remove any sticker or protective foil from  
the Display before using razor.  
Charging or recharging requires one full hour.  
 
16 ENGLISH  
ENGLISH 17  
A fully charged razor has a shaving time of up  
to 65 minutes.  
You may recharge when the recharge  
indicators appear on the razor.  
Do not charge/recharge or use razor until  
fully dried.  
4
Insert the top of the razor into the power  
pod (1) and then press the bottom part  
into the power pod (2).  
C
5
6
The display on the razor will indicate razor  
is charging.  
Charging requires one full hour. A fully  
charged razor has a cordless shaving time  
of up to 21 days.  
Charging in the Power Pod  
1
Connect the small plug of cord to power  
pod. Connect the power plug into any  
100V to 240V AC outlet. Use only the  
power cord provided.  
C
Charging in the Charging Stand  
1
Connect the small plug of cord to charging  
stand. Connect the power plug into any  
100V to 240V AC outlet. Use only the  
power cord provided.  
An adaptor plug may be necessary for power  
cord usage in some foreign countries. Use  
an attachment plug adaptor of the proper  
configuration for the power outlet.  
The power cord will automatically convert to  
work on 100V to 240V AC systems.  
An adaptor plug may be necessary for power  
cord usage in some foreign countries. Use  
an attachment plug adaptor of the proper  
configuration for the power outlet.  
2
Lift the top of the power pod lid (1) and  
C
C
remove (2).  
The power cord will automatically convert to  
work on 100V to 240V AC systems.  
2
Place razor in stand in an upright position.  
Press the razor tightly into the holder  
making sure the charging contacts on each  
side of the razor fit into the holder. If  
razor has been placed correctly, you will  
hear a beep (Model 1090X only).  
C
3
Remove protective razor head cap from  
razor.  
The razor will not fit in the power pod with the  
protective razor head cap on razor.  
 
18 ENGLISH  
ENGLISH 19  
3
4
The display on the razor will indicate razor  
is charging.  
skin will need time to adjust.Invest 3 weeks and  
you’ll soon experience the full joy of your new  
razor.  
Stick with it! If you alternate shaving methods  
during the adjustment period,it may make it  
more difficult to adapt to the Philips Norelco  
shaving system.  
Charging requires one full hour. A fully  
charged razor has a cordless shaving time  
of up to 21 days.  
Recharging  
If you are still not convinced after 21 days,  
Philips Norelco will refund you the full  
purchase price as long as the request is  
received within 45 days of purchase.  
1
Recharging requires one full hour.  
Recharge when the recharge indicators  
appear on the razor.  
Always unplug charging stand/pod from the  
electrical outlet immediately after use, except  
when razor is (re)charging.  
HowTo ShaveWith Razor  
Use this razor for its intended household use  
as described in this manual.  
Quick Charge  
Shaving with a clean, dry face gives the best  
results.  
When batteries are totally depleted, recharging  
the razor for approximately 3 minutes gives  
enough energy for a 3-minute cordless shave.  
C
1
Turn razor ON by pressing the on/off  
button once. Shave against the direction  
of beard growth using both straight and  
circular movements.  
Put ItToTheTest & ShavingTips  
21 Day Trial and Conversion Process.It is a fact  
that your skin and beard need time to adjust to  
a new shaving system.  
Useyour new razorexclusively for 3 weeks to  
fully enjoy the closeness of a Philips Norelco  
shave.  
2
Stretch your skin with your free hand so  
blades can lift and cut whiskers. Gently  
press razor to skin so the floating heads  
can follow the contours of your face.  
DO NOT press too hard.Too much  
pressure can pinch the skin into the combs.  
At first you may not get as close a shave as you  
expect,or your face may even become slightly  
irritated.This is normal since your beard and  
 
20 ENGLISH  
ENGLISH 21  
3
Turn razor OFF by pressing the on/off  
button once.  
3
4
5
Hold trimmer to exact hairline desired.  
Move trimmer downward with gentle  
pressure.  
C
The display lights up for a few seconds and then  
shows the remaining battery capacity (Models  
1090X, 1060X and 1059X only).  
Trim beard, moustache or sideburns using  
the trimmer.  
C
C
4
Put the Protective Razor Head Cap on the  
razor to protect razor heads.  
Turn razor OFF when finished.  
The display lights up for a few seconds and then  
shows the remaining battery capacity (Models  
1090X, 1060X and 1059X only).  
For optimal shaving results, replace Razor Head  
Asssembly (model #RQ10) once a year or  
when the replacement head symbol starts  
blinking.  
6
7
Thoroughly clean the trimmer after using  
(see ‘Cleaning’).  
Put the Protective Razor Head Cap on the  
razor.  
C
Trimming  
To Groom Sideburns and Moustache:  
1
Turn razor ON.  
Travel Lock  
The display lights up for a few seconds.  
If you are going to store the razor for a longer  
time period or if traveling, it is possible to lock  
the razor.The travel lock prevents the razor from  
being switched on by accident.  
2
Press the trimmer slide forward to slide out  
the trimmer.  
C
 
22 ENGLISH  
ENGLISH 23  
Activating theTravel Lock  
Do not apply pressure to combs. Do not  
touch razor heads with hard objects as this  
may dent or damage precision-made slotted  
combs.  
Do not use razor if combs are damaged or  
broken. Facial injury may occur.  
1
Press the ON/OFF button for 3 seconds  
until the lock symbol appears on the  
display. For model 1090X only, you will also  
hear a beep.  
C
Never dry the shaving unit with a towel or  
tissue as this may damage razor heads.  
DO NOT attempt to disassemble the Razor  
Head Assembly to individually replace or  
clean each cutter and comb.The individual  
shaving heads (cutters and combs) are NOT  
removable/replaceable.  
2
The travel lock has now been activated.  
Deactivating theTravel Lock  
1
2
Press the ON/OFF button for 3 seconds.  
Do not use abrasives, scourers or liquids such  
as acetone to clean the razor.  
The razor turns ON to indicate that the  
razor has been unlocked.The razor is now  
ready for use.  
1
The faucet symbol will start blinking after  
each shave to remind you that the razor  
needs to be cleaned.  
C
C
B
The razor unlocks automatically when you place  
the razor in the power pod or charging stand  
while plugged in.  
Razor Head Assembly:After Each Use  
Cleaning  
It is recommended that you clean the Razor  
Head Assembly thoroughly after each use to  
maintain optimal shaving performance.  
C
The tap symbol on the back of the razor  
indicates that the razor can be rinsed under  
running tap water.  
Always clean your razor after each use.  
Regular cleaning guarantees better shaving  
results.  
Always switch razor OFF and remove from  
charging stand or power pod before cleaning.  
Never remove or replace Razor Head  
Assembly while motor is on.  
1
2
Turn razor OFF.  
Using your thumb and forefinger, grasp the  
sides of the shaving head near the center  
of the assembly and pull each individual  
shaving head open.  
 
24 ENGLISH  
ENGLISH 25  
Razor Head Assembly:With A Brush  
Note: Individual shaving heads are not removable  
from the Razor Head Assembly.  
1
2
Turn razor OFF.  
3
Rinse all three shaving heads and three  
hair chambers under hot tap water by  
letting the water run in and around all the  
openings for at least 30 seconds.  
C
Using your thumb and forefinger pull each  
individual shaving head open.  
C
C
C
Note: Individual shaving heads are not removable  
from the Razor Head Assembly.  
BE CAREFULTOTEST WATER FIRST SO AS  
NOTTO BURN OR SCALD HANDS.  
3
Brush out hairs from each shaving head  
and hair chamber with the supplied brush.  
4
You can also immerse the Razor Head  
Assembly in hot water with some liquid  
soap or a degreasing liquid (e.g. alcohol)  
for at least 30 seconds.  
C
C
Make sure the razor is ON to thoroughly  
remove any residue. Rinse Razor Head Assembly  
completely under hot tap water before using  
razor.  
4
Press each shaving head back onto the  
Razor Head Assembly. You will hear a  
‘click’.  
5
6
7
Carefully shake off excess water and leave  
the shaving heads open to dry the Razor  
Head Assembly completely.  
Trimmer:After Each Use  
Press each shaving head back onto the  
Razor Head Assembly. You will hear a  
‘click’.  
1
2
Turn razor OFF.  
Push the trimmer slide switch forward to  
slide out the trimmer.  
C
Allow Razor Head Assembly to completely  
air dry before storing.  
 
26 ENGLISH  
ENGLISH 27  
3
Clean the trimmer with the short-bristled  
side of the brush supplied. Brush up and  
down along the trimmer teeth.  
replace your Razor Head Assembly to obtain  
optimal shaving results.  
C
1
2
Remove the Razor Head Assembly from  
the razor by pulling the Razor Head  
Assembly straight up away from the razor.  
C
C
4
5
6
Turn the trimmer ON and OFF. Repeat  
step 3.  
Lubricate trimmer teeth twice a year with  
one drop of mineral oil.  
Place new Razor Head Assembly back on  
the razor and push down (you will hear a  
click).  
Push the trimmer slide switch backward to  
retract the trimmer.  
The Razor Head Assembly will only fit correctly  
in one position on razor. Make sure to align the  
raised notch on the Razor Head Assembly (1)  
with the slot inside the top of razor (2).  
C
Replacing Razor Head Assembly  
Replace the entire Razor Head Assembly once  
a year for optimal shaving results.  
Replace damaged or worn Razor Head  
Assembly with model RQ10 Philips Norelco  
razor heads only.  
This razor and charging stand/power pod have no  
other user-serviceable parts. For assistance call  
1-800-243-3050.  
Maintenance  
The individual shaving heads (cutters and  
combs) are NOT removable/replaceable. Only  
the one-piece Razor Head Assembly can be  
replaced.  
Always remove razor from the charging stand/  
power pod before cleaning appliance.  
Unplug the charging stand/power pod after  
charging/recharging razor.The charging stand/  
power pod and razor may be wiped clean using  
a damp cloth.  
Replacement Razor Head Assembly  
Indication  
Water from the tap should be on a warm  
setting to clean any washable parts.  
The replacement head indicator symbol starts  
blinking (model 1090X only, you will also hear  
a beep) to remind you to check if it’s time to  
C
Note: DO NOT place or clean any parts of the  
charging stand/power pod in a dishwasher.  
 
28 ENGLISH  
ENGLISH 29  
Storage  
Assistance  
The razor can be stored in the power pod  
supplied.The power pod will provide extra  
protection during travel.  
The razor can be placed in the charging  
stand/power pod for safe storage. Remove the  
plug from outlet as soon as the razor is fully  
charged.  
For assistance, call toll free:  
1-800-243-3050  
or visit our website:  
Information is available 24 hours a day,  
If storing razor in power pod, be sure to  
remove Protective Razor Head Cap from  
razor.  
7 days a week.  
If appliance will not be used for an extended  
period of time, it is recommended that you  
thoroughly clean and air dry the Razor Head  
Assembly and trimmer before storing.  
Be sure razor is turned off. Remove cord from  
outlet and charging stand/power pod before  
storing in a safe, dry location where it will not  
be crushed, banged, or subject to damage.  
Do not wrap cord around razor or charging  
stand/power pod when storing.  
Store cord in a safe location where it will not  
be cut or damaged.  
Do not keep charging stand/power pod  
permanently plugged into outlet.  
Do not place or store charging stand/power  
pod where it can fall or be pulled into a tub  
or sink, water or other liquid while plugged in.  
During storage in the charging stand, always  
put the Protective Razor Head Cap on razor  
to protect heads.  
 
30 ENGLISH  
ENGLISH 31  
Accessories  
FULLTWOYEARWARRANTY  
Philips Electronics North America Corporation warrants each new Philips Norelco Product,  
Models 1090X/1060X/1059X/1050X (except cutters and combs) against defects in materials  
or workmanship for a period of two years from the date of purchase, and agrees to repair or  
replace any defective product without charge.  
IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse,  
lack of reasonable care, the affixing of any attachment not provided with the product or loss of  
parts or subjecting the product to any but the specified voltage.* Use of unauthorized replace-  
ment parts will void this warranty.  
PHILIPS ELECTRONICS NORTH AMERICA CORPORATIONWILL NOT PAY  
FORWARRANTY SERVICE PERFORMED BY A NON-AUTHORIZED REPAIR  
SERVICE ANDWILL NOT REIMBURSETHE CONSUMER FOR DAMAGE RE-  
SULTING FROMWARRANTY SERVICE PERFORMED BY A NON-AUTHORIZED  
REPAIR SERVICE. NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL,  
INCIDENTAL OR CONSEQUENTIAL DAMAGES.  
3050 for assistance. It is suggested that for your protection you return shipments of product  
by insured mail, insurance prepaid. Damage occurring during shipment is not covered by this  
warranty.  
Replacement Razor Head Assembly  
Model RQ10 – For maximum razor  
performance, replace your Philips Norelco  
Razor Head Assembly once a year. Razor Head  
Assembly contains 3 cutters & 3 combs that  
are not individually removable or replaceable.  
Philips Norelco Razor Accessories may be  
purchased at a store near you or on our  
NOTE: No other warranty, written or oral, is authorized by Philips Electronics North America  
Corporation.  
This warranty gives you specific legal rights, and you may also have other rights which vary from  
state to state. Some states do not allow the exclusion or limitation of incidental or consequen-  
tial damages, so the above exclusion and limitations may not apply to you.  
* Read enclosed instructions carefully.  
Manufactured for:  
Philips Consumer Lifestyle  
A Division of Philips Electronics North America Corporation  
1600 Summer Street – 5th Floor, Stamford, CT 06905-5125  
TM  
®
This symbol on the product’s nameplate means it is  
listed by Underwriters’ Laboratories, Inc.  
LISTED  
Norelco,Tripleheader, Lift and Cut and  
North America Corporation.  
are RegisteredTrademarks of Philips Electronics  
Arcitec is aTrademark of Philips Electronics North America Corporation.  
is aTrademark of Philips Electronics North America Corporation.  
PHILIPS is a RegisteredTrademark of Koninklijke Philips Electronics N.V.  
© 2009 Philips Electronics North America Corporation. All Rights Reserved.  
 

Pelican Video Game Controller PL 678 User Manual
Philips Computer Monitor HNB7190T User Manual
Philips Computer Monitor M1500 User Manual
Philips Electric Toothbrush HX3300 User Manual
Philips Projection Television 9P 5534C User Manual
Philips VCR SB630 User Manual
Philips Work Light E1 Series User Manual
Pioneer Cassette Player KEH P2800R User Manual
Polk Audio Stereo System RM6750 User Manual
Proctor Silex Coffee Grinder E160B User Manual