Philips Portable DVD Player PET940
3
Quick start guide
1
English
2
1
3
Charge
Connect to TV
1 Switch OFF the set.
2 Connect the supplied adaptor to the set and the AC
outlet.
1 Connect the set to the TV as shown.
2 Please select an appropriate input or source on the TV.
You can consult the owner’s manual of your TV. (If your
TV does not have Audio andVideo inputs, you will need
to purchase a RF modulator. Please consult your dealer
for more information.)
8
3 The RED light comes on.
1
4 The battery pack will be fully charged in approximately
4 hours.When the RED light goes off, it means that the
battery pack is fully charged.
2
TIP:You can operate the DVD player while charging.
However, it takes longer time to fully charge the battery.
7
4
6
3
2
Enjoy DVD
1 Open the lid.
2 Press and hold POWER.
3 The GREEN light turns on.
4 Open the DVD door by pushing the OPEN.
5 Remove protective card (if any).
6 Load the DVD disc.
7 Close the DVD door and the set will automatically start
to play.
8 Use the control keys on the set or the remote control.
White
Red
Yellow
|