Installation Instructions
PSD-D
Step 1
Separate the upper pipe and the lower tube. Install the upper pipe in the ceiling structure using suitable commercial
hardware. Screw the lower portion of the PDS-S to the coupling and secure with the elen screws.
Step 2
Once the upper pipe has been properly installed.
Insert the lower tube (with the PSD-D attached)
inside the upper pipe. Adjust the desired height
and lock it with the two (2) through bolts. Then screw
in the (3) three thumb screws to stabilize
the pipe and tube.
2980-A Enterprise Street, Brea, Ca. 92821 / Ph.(800)368-9700 Fax (800)832-4888
|