Princeton Electronic Keyboard SP 88 User Manual

Princeton SP-88 Portable Ensemble  
USER’S MANUAL  
For a more musical life™  
 
When the piano is not in use or during electrical storms, please disconnect the power  
supply  
Avoid adjusting the volume to the maximum level or to a level that you feel uncomfortable,  
it is recommended that you limit the volume level to two-thirds of the max to prevent any  
damage of your auditory sense  
Unplug the power cable before cleaning the piano. Do not connect or disconnect the  
power cable with a wet hand.  
Check and clean the power plug periodically.  
To avoid damage to the piano and other devices to which it is connected, turn the power  
switches of all related devices off prior to connecting or disconnecting cables.  
Clean the piano and remove the dust with a dry soft cloth or a slightly damp cloth. – never  
spray any cleaners directly on or into your piano.  
Never use cleaners such as thinner or alcohol. To prevent any damage on the surface of  
the LED display, please use lens cleaning tissue to clean the display.  
If the piano power cord is damaged in any way, please do not use the piano. A damaged  
power cord risks fire or electrical hazard.  
In case of malfunction due to improper handling of the piano, please switch your piano off  
and wait 30 seconds before turning on again.  
Do not attempt to disassemble or repair the piano by yourself. If the piano does not work  
properly, please contact your authorized reseller or service technician.  
Main Features  
Keyboard: 88 hammer action key  
Modifying Parameters: Use the round DIAL & the [+/YES] / the [-/NO] buttons or numeric  
keypad to select Menus & Parameters  
Program (Voice): there are 350 incredible sound presets (including user-editable presets)  
Synth: you can use the SYNTH feature to create your own sounds  
Demo: three built-in demos  
Style: 130 built-in Music Styles  
Language: the large LCD display screen can be viewed in several languages  
The piano has a friendly interface, especially the menu operation. You can use  
BACK/NEXT/+/-/DIAL to operate all features  
Chord: A.B.C mode. This is the “EZ-Play” feature that allows the keyboard to read your  
chords in the left hand while playing your melody in the right hand  
Record: you piano can record two songs. Each one has 4 melody tracks and an  
 
accompaniment track.  
Read and write SM (smartmedia®) card: the piano can play or record Standard MIDI files  
from your SM card - save songs and other storage data onto your SM card. Supports  
16MB, 32MB, 64MB, and 128MB SM cards  
Panel Memories: 48 total – with 8 Banks - 6 Memories each  
PitchBend & Modulation “joystick”: horizontal movement of the joystick controls Pitch  
Bend., vertical movement controls the Modulation effect  
Album: your piano provides a set of default parameters for 100 songs to get optimal  
performance effects  
Other functions: Your piano features other great features like ONE-Touch-Setup, DSP  
(Digital Signal Processing) and a lot more!  
MIDI: Your piano can easily be connected with other MIDI instruments through your MIDI  
IN/OUT ports.  
Online HELP button: virtual help menu whenever you need it!  
Basic Description of Features  
6
17 19  
16 18  
24 26  
23 25  
34 36 38  
5
7
31  
32  
33 35 37 39 40 41  
ALBUM  
MIN  
MAX  
VOLUME  
8
9
10 11 12 13  
15  
20 21  
22  
27 29  
28 30  
14  
43  
42  
1. FRONT PANEL  
1) MASTER VOLUME  
2) ACCOMP  
3) BRILLIANCE  
SLIDER  
15) TEMPO +/-  
16) HELP  
29) DUAL  
30) FUNCTION  
31) DIAL  
17) SMC LOAD  
18) A.B.C  
Chord)  
(Auto  
32) NUMERIC  
KEYPAD  
4) SONG TRACKS  
5) RECORD  
6) PLAY  
19) BACK  
20) UTILITY  
21) NEXT  
22) SAVE  
23) ALBUM  
24) STYLE  
25) DEMO  
26) DSP  
33) O.T.S.  
34) FREEZE  
35) SUSTAIN  
36) TRANSPOSE  
37) HARMONY  
38) SYNTH  
39) TOUCH  
40) BANK  
7) ACCOMP VOLUME  
+/-  
8) START/STOP  
9) INTRO  
10) FILL-IN A  
11) FILL-IN B  
12) ENDING  
27) VOICE  
28) LOWER  
VOICE  
41) STORE  
42) M1-M6  
13) SYNC START  
14) SYNC STOP  
43) LCD DISPLAY  
 
20  
19  
5
6
1
2
8
9
10  
15  
11  
12  
13  
7
3
4
22  
21  
23  
18  
8
9
16  
14  
2. L.H. SIDE  
3. LCD DISPLAY  
1) DC12V POWER JACK  
2) POWER  
1) A.B.C.  
14) MELODY 1-4  
15) ACCOMP  
2) HARMONY  
3) LOWER  
4) DSP  
3) MIDI IN/MIDI OUT  
4) SUSTAIN PEDAL  
5) VOLUME PEDAL  
6) AUX.IN  
16) PLAY  
17) RECORD SONG 1/2  
5) TOUCH  
6) SUAL  
18) SYNTH/NOR/VAR/SMC/  
19) DISK  
7) AUX.OUT L/MONO  
8) AUX.OUT RIGHT  
9) PHONES1/PHONES 2  
7) SUSTAIN  
8) METRONOME  
9) TEMPO VEL  
10) MEASURE  
11) BEAT  
20) CHORD  
21) VOICE/STYLE/SONG/  
22) DEMO/ALBUM/PHRASE  
23) BAS CLEF  
24) TREBLE CLEF  
25) FILL-IN A/FILL-IN B  
12) MEMORY/O.T.S.  
/TICK  
13) STEP/REC  
4. REAR PANEL  
5. JOY STICK  
3.3 SMC SLOT  
Pitch bend/  
modulation joystick  
3.3V CARD  
SMC BASE  
Connections  
The power jack  
Your piano can be powered from  
a
Make sure to turn off the piano before you  
connect the adaptor into the AC wall outlet.  
standard household wall outlet by using the  
specified AC adaptor. The power jack is located  
on the left panel of the piano body. Make sure  
that only the AC adaptor specified for this piano  
is used. The adaptor shall be 12V DC output,  
and center positive type.  
DC 12V  
C
 
Use of a different type of adaptor risks  
fire and/or electrical shock. For safety sake,  
make sure to unplug the AC adaptor from the  
wall outlet whenever leaving the piano  
unattended for a long time or during an electrical  
storm.  
The headphone jack  
There are two headphones jacks – jack “1” lets  
you listen through BOTH the headphones and  
internal speakers, jack “2” lets you listen  
through the HEADPHONES ONLY (disconnects  
the internal speakers).  
Caution!  
Never use the headphones with high volume,  
as it may cause damage to your ears. In addition,  
to prevent damage to your speakers,  
ensure that the volume is set to the minimum  
level before connecting any other device.  
The AUX.OUT jack  
When you want to listen to your piano with an  
External amplifier or speaker, connect to the  
AUX OUT L/MONO and R jacks on the left  
panel. The volume is adjusted with the  
VOLUME button. (For monaural playback, use  
the L/MONO jack. For stereo playback, connect  
both L/MONO and R jacks.)  
The AUX.IN jack  
The audio output from a CD player or other  
audio equipment can be connected to the AUX  
IN jack on the left panel so it can be mixed with  
the sound of your piano. This function is  
convenient when you want to play along with a  
favorite song. The volume of the external signal  
is adjusted with the MASTER VOLUME button.  
CD Player  
The sustain jack  
An optional footswitch can be plugged into the  
SUSTAIN jack for sustain control. The  
footswitch functions like the sustain pedal on a  
piano.  
 
The volume jack  
An optional footswitch can be plugged into the  
VOLUME jack for adjusting the volume of your  
piano – this is particularly useful for live  
performance situations.  
The MIDI IN/OUT jack  
MIDI stands for “Musical Instrument Digital  
Interface.”. MIDI is a world wide standard that  
makes it possible for various electronic musical  
instruments and devices (including computers)  
to communicate with one another.  
MIDI IN:  
Data transmitted from other MIDI instruments  
via MIDI is received by this terminal.  
MIDI OUT:  
Data produced by your Digital Piano is  
transmitted to other MIDI instruments via MIDI  
from this terminal.  
Basic operations  
Default & Reset Settings  
1. To reset the instrument to the FACTORY  
DEFAULT (Including Memory data,  
Record data, Language set, SYNTH data  
etc.), press the [+]/[-] button synchronously.  
1
3
2
4
2. To clear the record data, press the  
[RECORD] & the [PLAY] button at the  
same time.  
3. To set all the memory data to default  
settings, press the [STORE] & the [M1]  
button at the same time.  
4. To reset all the SYNTH parameters, press  
the [STORE] & the [SYNTH] button at the  
same time.  
 
Master volume control  
Turn the VOLUME KNOB to adjust the  
MASTER VOLUME.  
MIN  
MAX  
VOLUME  
Brilliance  
For a brighter sound, move the BRILLIANCE  
slider to the right.  
For a mellower sound, move the BRILLIANCE  
slider to the left.  
You can change the keyboard brilliance as you  
wish.  
Demo  
There are 3 Built-in Demos.  
Press the [DEMO] button, the DEMO icon on  
the LCD lights. It displays the first demo  
name "World", and plays all 3 demos.  
Press the [DEMO] button again or press the  
[START/STOP] button to stop playing and exit  
demonstration mode.  
Press and hold the [DEMO] button for 3  
seconds to play current demo repeatedly.  
While playing, press the [+] & the [-] button  
or rotate the DIAL to select the DEMO you  
want. After the DEMO name flashes for 3  
seconds, it plays the new demo immediately.  
When playing the demo, press the [TEMPO+]  
& the [TEMPO-] button or rotate the DIAL or  
step TEMPO/TAP pedal to adjust the current  
tempo.  
 
Voice effect  
Voice select  
There are 350 VOICES. (See "APPENDIX 1  
VOICE LIST") which includes 293 GM Sounds,  
35 Chinese Sounds, 13 percussion Sets  
and 9 User Sounds.  
When the voice feature is activated, the LCD  
highlights the "VOICE R1" flag and the selected  
sound appears in the upper line. ex: "001  
Piano). It displays the style name  
"001 8 Beat 1" on a second line. Use the  
[+] & the [-] button and numeric keypad to  
select the voice you desire.  
Note:  
The keyboard will automatically check the  
validity of your number choice when you use the  
numeric keypad to select the voice.  
Dual  
Press the [DUAL] Button . The LCD lights the  
DUAL and VOICE R2, and highlights the Voice  
name on upper line "144 Sound Track1".  
(See "APPENDIX 1 VOICE LIST")  
DUAL  
DUAL  
Use the [+] & the [-] button or the DIAL and  
numeric keypad to select the DUAL VOICE.  
DUAL  
Press the [DUAL] button again to exit DUAL  
mode.  
In DUAL mode, press the [VOICE] button to  
switch to other voice modes ( VOICE R1/  
LOWER)  
Note:  
When A.B.C and lower Voice is off, the whole  
keyboard will be set as VOICE R2.Otherwise,  
only the right part will be set as VOICE R2.  
The piano will check the validity of number  
input when you use the numeric keypad to  
select the voice.  
 
Lower voice  
Press the [LOWER VOICE] button. LCD  
lights the lower icon and "VOICE L" . The  
LCD highlights the Voice name on upper line  
"144 Sound Track1".  
LOWER VOICE  
LOWER  
Use the [+] & the [-] button or the DIAL and  
numeric keypad to select the LOWER VOICE.  
In LOWER VOICE mode, press the [VOICE]  
button to switch to other voice modes ( VOICE  
R1/DUAL).  
Note:  
The piano will check the validity of your number  
input when you use the numeric keypad to  
select the voice.  
Sustain effect  
This feature applies SUSTAIN effect to the  
keyboard.  
SUSTAIN  
The default value when you turn on the  
instrument is SUSTAIN effect OFF  
SUSTAIN  
Press the [SUSTAIN] button to turn on the  
SUSTAIN effect. LCD lights the SUSTAIN  
icon. It will apply sustain effect when playing  
the keyboard. Press the [SUSTAIN] button  
again to turn off the SUSTAIN effect.  
When the PEDAL is assigned as SUSTAIN  
PEDAL (See FUNCTION menu for details),  
pressing the [SUSTAIN] button and stepping  
SUSTAIN PEDAL can take out their respective  
sustain effect simultaneously.  
Note:  
SUSTAIN via the pedal is better than the  
SUSTAIN EFFECT.  
 
DSP effect  
DSP effects help enhance the sounds in your  
keyboard.  
The default DSP setting is ON. DSP icon is  
lit. Press the [DSP] to turn on/off the  
DSP effect.  
The DSP effect is determined by 4 parameters  
including REVERB TYPE, REVERB LEVEL,  
CHORUS TYPE and REVERB LEVEL.  
(See FUNCTION menu for details)  
It offers 8 REVERB & CHORUS TYPES. These  
levels can be adjusted from 0~127. The default  
REVERB TYPE  
and LEVEL is HALL2 and 92;The default  
CHORUS TYPE and LEVEL is CHORUS3 and  
0.  
Note:  
Turning the DSP ON/OFF while you’re playing  
will interfere with the sound  
Harmony effect  
There are 8 Harmony types. (See  
FUNCTION menu for details)  
HARMONY  
HARMONY  
The default HARMONY setting is OFF. Take  
Harmony duet, one of 8 harmony types as an  
example. Press the [HARMONY] button to  
turn on the HARMONY effect and the LCD  
lights the Harmony icon. It displays  
"Harmony Duet" temporarily. Playing a valid  
CHORD in the left/chord zone before playing  
the note in the right hand zone, the DUET effect  
will function.  
Note:  
The HARMONY effect only works when the  
A.B.C is on.  
 
Touch response  
There are 3 types of Touch Response. (See  
FUNCTION menu for details).  
TOUCH  
TOUCH  
The default Touch setting is Medium. Touch  
icon is lit on the LCD. Press the [TOUCH]  
button. The LCD displays the current Touch  
Response type "Touch Mode: Medium"  
Press the [TOUCH] again to turn off the Touch  
Response and displays "Touch Mode: Off".  
Transpose  
Press the [TRANSPOSE] button. LCD displays  
"Transpose = 000? Use the [+]& [-] button or  
the DIAL to adjust the transpose value.  
TRANSPOSE  
In TRANSPOSE setting , press the [+] & [-]  
At the same time will set the value to 0.  
Pitch bend/modulation joystick  
Turn left and right the joystick to activate the  
PITCH BEND effect. This adjusts the tuning  
from -2 semitones to +2 semitones in default  
range and you can also set the range from -12  
semitones to -12 semitones.  
(See FUNCTION menu for details)  
Pushing the joystick up and down will activate  
the MODULATION effect.  
Style  
Use the [+] & [-] button, the DIAL and the  
numeric keypad to select the style.  
Style select  
There are 130 styles in all. (See "APPENDIX  
3 STYLE LIST")  
Note:  
The piano will check the validity of number  
input when you use the numeric keypad to  
select the style.  
When power is on, the LCD displays the style  
name "001 8 Beat 1" at the bottom line.  
Press the [STYLE] button to illuminate the  
STYLE icon. Style name "001 8 Beat 1"at the  
upper line will appear.  
 
button to insert 1 measure fill and LCD flashes  
"NOR" icon. Then, it changes to the NORMAL  
style playing.  
Style start  
Start directly:  
Press the [START/STOP] button to start playing  
the style.  
Note:  
Start after INTRO:  
If you press the [FILL-IN A] or the [FILL-IN B]  
in the last beat of a measure, a fill is inserted  
after the current measure finished.  
When the style is not playing, press the [INTRO]  
button, and then press the [START/STOP]  
button to start the INTRO. The NORMAL style  
will be followed by an INTRO section.  
Start after ENDING:  
Press and hold the [FILL-IN A ] or the [FILL-IN  
B] button. It will play FILL A/FILL B repeatedly  
until you release the button.  
When the style is not playing, press the  
[ENDING] button, and then press the  
[START/STOP] button to start the ENDING. The  
NORMAL style will be followed by ENDING  
section.  
Press the [ENDING] button when style is  
playing. It will stop the style after ENDING  
playing unless you pressthe [FILL-IN A] or the  
[FILL-IN B] button before it finished.  
Style stop  
SYNC start:  
Press the [SYNC START] button. LCD flashes  
4 beats with current tempo. Press the [INTRO]  
or the [ENDING] button to insert INTRO or  
ENDING. In this mode, playing the keyboard  
will start the style automatically.  
Stop directly:  
Press the [START/STOP] button to stop style.  
Stop after ENDING:  
Press the [ENDING] button. The style will stop  
after ENDING is over.  
Note:  
If A.B.C mode is off, the style will start by  
playing any key on keyboard.  
SYNC Stop:  
When A.B.C is on and style is playing, press  
the [SYNC STOP] button, SYNC STOP and  
SYNC START LED is lit, the style stops  
playing and the 4 beats flash at the same time.  
In this mode, press the keyboard to start the style  
and release the keyboard to stop it.  
If A.B.C mode is on, the style will start by  
playing the keys in the LH chord area only.  
Fill in A/B  
In NORMAL mode, press the [FILL-IN A]  
button to insert a 1-measure fill and LCD flashes  
"NOR" icon. Then, it returns to the NORMAL  
style playing.  
In SYNC STOP mode, press the [SYNC STOP].  
The [DEMO] or the [RECORD] button can quit  
SYNC STOP mode.  
In VARIATION mode, press the [FILL-IN B]  
button to insert 1 measure fill and LCD flashes  
"VAR" icon. Then, it returns to the VARIATION  
style playing.  
Note:  
When A.B.C mode is off, you cannot turn on  
SYNC STOP mode.  
In NORMAL mode, press the [FILL-IN B]  
button to insert 1 measure fill and LCD flashes  
"VAR" icon. Then, it changes to the  
VARIATION style  
playing.  
In VARIATION mode, press the [FILL-IN A]  
 
simultaneously press the root key and both a  
white and black key to its left.  
ACCOMP volume  
Press the [ACCOMP VOLUME +] or the  
[ACCOMP VOLUME-] button. LCD displays  
"Accomp Volume = 021 ". Press the  
[ACCOMP VOLUME +] & the [ACCOMP  
VOLUME -] button or the [+] & [-] button and  
the DIAL can adjust the accompaniment  
volume from 0 ~ 31.  
Fingered Chord: the Fingered Chord detect  
mode lets you finger your own chords on the  
AUTO ACCOMPANIMENT section of the  
keyboard. The piano supplies appropriately  
orchestrated rhythm, bass and chord  
accompaniment to the selected style. The  
Fingered Chord can recognize the following  
chords:  
Press the [ACCOMP VOLUME +] and the  
[ACCOMP VOLUME -] synchronously or the  
[+] and the [-] button synchronously can mute  
the accompaniment. LCD displays "Accomp  
Volume= off ".  
Tempo  
Press the the [TEMPO+] or the [TEMPO-]  
button to adjust the tempo. The tempo value  
will flash. It can be adjusted in the range  
of 30-280.  
Auto bass chord  
Press the [A.B.C] button to turn on the Auto  
Bass Chord mode. A.B.C icon is lit. In  
this mode, the keys below split point are known  
as the AUTO ACCOMPANIMENT section  
(left / chord area).  
Press the the [TEMPO+] and the [TEMPO-]  
simultaneously to return to the default tempo.  
When the pedal is assigned as TAP TEMPO  
(See Function menu for details), the pedal can  
adjust the tempo by double clicking the pedal.  
(See Pedal for details)  
To exit the A.B.C mode, press the [A.B.C]  
button again.  
There are 2 ways to detect the chord: Single  
Finger Detect and Fingers Detect. If the chord  
playing accords with Fingers Detect, it is  
recognized as the Fingers Chord. If not, Single  
Finger Chord will be recognized.  
Function  
Press the [FUNCTION] button to enter the  
Function menu. Use the dial, the [+] or the  
[-] button to select functions. Use the [NEXT]  
button to enter the next page, and use the  
[BACK] button to go to previous page.  
Single Finger Chord: Chords that can be  
produced in single finger operation are major,  
minor, seventh and minor seventh. The  
illustration shows how to play the four chord  
types. To play a major chord, press the root note  
To exit the function menu, press the  
[FUNCTION] button or press the [BACK] and  
the [NEXT] button simultaneously.  
of the chord. To play  
simultaneously press the root key and a white  
key to its left.To play minor chord,  
a
seventh chord,  
a
Items which can be adjusted in the function  
menu are as follows.  
simultaneously pressthe root key and a black key  
to its leftTo play a minor-seventh chord,  
 
First series  
Metronome  
Second series  
Third series  
Next  
Default  
Next  
Back  
Next  
Back  
Back  
Off Voice Pad  
Off  
Reverb Type  
Room 1/Room 2/ Room 3/ Hall 1/ Hall2/ Plate/  
Hall2  
Delay/ Pan Delay  
0~127  
Reverb Level  
Chorus Type  
92  
Chours1/ Chours2/ Chours3/Chours4/Feedback/ Chorus 3  
Flanger/ Short DElay/ FBDelay  
Digital Effect  
Chorus Level  
0~127  
0
Duet  
Duet/ 1+5/ COuntry/TRio/BLock/4 Close 1/  
4 Close 2/4 Open  
Harmony Type  
Tune Value  
-50--50  
0
Touch Type  
Soft/ MEdium/Hard  
Medium  
VoiceR1Octave  
VoiceR2Octave  
VoiceL Octave  
-1  
-1  
-1  
0
0
0
1
1
1
0
0
0
2
Utility  
Pitch Bend Range 0 - 12  
Split Point  
1-- 88 88Keys  
34  
Pedal Assign  
Sustain Pedal/Soft Pedal/ Start/Stop Pedal/  
Sustain  
Pedal  
1
Tempo/Tap  
1~16  
Memory Select Pedal  
Transmit  
Receive  
MIDI  
1~16 ,ALL  
ALL  
27  
Orchestra1 Volume 0--31  
Orchestra2 Volume 0--31  
Orchestra 3 Volume 0--31  
27  
27  
Mixer  
Vo ice R1 Volume  
Voice R2 Volume  
Voice L Volume  
Bass Volume  
0--31  
27  
0--31  
18  
0--31  
12  
0--31  
28  
Drum Volume  
0--31  
28  
Language  
English /Chinese  
English  
Type" and displays "Reverb Level". Choosing  
"Reverb Type" /"Reverb Level"/"Chorus Type"/  
"Chorus Level"/"Harmony Type" by rotating  
the dial, or using the [+] button / the [-] button.  
Press the [NEXT] button to enter to parameter  
setting menu.  
Metronome  
Press the [FUNCTION] button to enter the  
metronome menu. Press the [NEXT] button to  
enter its sub-menu. LCD displays "metronome  
OFF". Use the [+] & [-] or DIAL to select the  
metronome type. It includes "Metronome:Voice"  
and "Metronome:Pad"  
Reverb Type  
A total of 8 different reverb types are available.  
Use the dial, the [+] button or the [-] button to  
select the reverb type. LCD take turns display  
Room1/Room2/Room3/Hall1/Hall2/Plate/Delay/  
Pan Delay. The default type is Hall2.  
Note:  
Metronome can be turned while the style is  
playing.  
Digital effect  
Press the [FUNCTION] button to enter the  
"Digital Effect" menu. Press the [NEXT] button  
to enter its sub-menu. LCD highlights "Reverb  
Reverb Level  
It ranges from 0 to 127. Use the dial, the  
numeric keypad [0]-[9] button, the [+]  
 
button or the [-] button to adjust the level value.  
The LCD displays the current level value. The  
default value is 92.  
Press the [+] button and the [-] button  
simultaneously will set the tune value to the  
default. The default value is 000.  
Chorus Type  
Note:  
A total of 8 different chorus types are available.  
Use the dial,the [+] button or the [-] button to  
select the chorus type. LCD takes turns to  
display Chorus1/Chorus2/Chorus3/Chorus4/  
Feedback/Flanger/Short delay/FB delay. The  
default type is Chorus3.  
When the tune value is +50, the note has  
changed 100 cents.  
When the tune value is 50, the note has  
changed -100 cents.  
Touch Type  
In the touch type setting, use the dial, the [+]  
button or the [-] button to select the touch type.  
A total of 3 different touch types are available.  
They are Soft/ Medium/Hard. The default type  
is Medium.  
Chorus Level  
It ranges from 0 to 127. Use the dial, the  
numeric keypad [0]-[9] button, the [+] button or  
the [-] button to adjust the level value.  
The LCD displays the current level value. The  
default value is 0.  
VOICE R1 OCTAVE  
In the voice R1 octave setting, LCD displays  
the current octave value. Use the dial, the [+]  
button or the [-] button to adjust the voice R1  
octave value. This function can apply to the  
right area of keyboard. The parameter range -1  
to 1. The default value is 0.  
Harmony Type  
You can add a variety of harmony notes to your  
performance in the right-hand section.  
A total of 8 different harmony types are  
available. Use the dial, the [+] button or the [-]  
button to select the harmony type. LCD takes  
to turns display Duet/1+5/Country/Trio/Block/  
4 Close1/4 Close2/4 Open. The default type is  
Duet.  
Press the [+] button and the [-] button  
simultaneously to set the octave value to the  
default.It can function after pressing the [DUAL]  
button and selecting VOICE R1.  
VOICE R2 OCTAVE  
Utility  
In the voice R2 octave setting, LCD displays  
the current octave value. Use the dial, the [+]  
button or the [-] button to adjust the voice R2  
octave value. This function can apply to the  
right area of keyboard. The parameter range -1  
to 1. The default value is 0.  
Press the [FUNCTION] button. Select "Utility"  
menu. Press the [NEXT] button to select Tune  
Value/Touch Type/Voice R1 Octave/Voice R2  
Octave/Voice L Octave/Pitch Bend Range/Split  
Point/Pedal Assign. Use the dial, the [+] button  
or the [-] button to select the utility sub-menu.  
Press the [NEXT] button to enter parameter  
setting.  
Press the [+] button and the [-] button  
simultaneously will set the octave value to the  
default one. It can function after pressing the  
[DUAL] button.  
Tune Value  
In the Tune Value setting, LCD displays the  
current tune value. Use the dial, the [+] button  
or the [-] button to adjust the tune value. This  
function can apply to the right area of keyboard.  
The parameter range -50 to 50.  
 
VOICE L OCTAVE  
Select Pedal circularly. The default value is  
Sustain Pedal.  
In the voice L octave setting, LCD displays the  
current octave value. Use the dial, the [+]  
button or the [-] button to adjust the voice L  
octave value. This function can apply to the  
right area of keyboard. The parameter range -1  
to1. The default value is 0.  
MIDI  
Press the [FUNCTION] button and select "Midi"  
menu. Press the [NEXT] button, the LCD  
displays transmit and receive. Use the dial, the  
[+] button or the [-] button to select the Midi  
sub-menu. The default one is Transmit. Press the  
[NEXT] button to enter channel setting.  
Press the [+] button and the [-] button  
simultaneously will set the octave value to the  
default one.  
It can function after pressing [LOWER VOICE]  
button.  
Transmit  
Select Transmit sub-menu. Press the [NEXT]  
button to enter Transmit channel setting,  
The LCD displays the current channel value.  
Use the dial, the [+] button or the [-] button to  
change the channel value from 1 to 16 channels.  
The default value is 001.  
PITCH BEND RANGE  
This function allows you to set the pitch bend  
range. In the Pitch Bend Range setting, LCD  
displays the current pitchbend range value.  
Use the dial, the [+] button or the [-] button to  
adjust its range. This function can apply to the  
right area of keyboard. The parameter range  
-12 to 12 semitones. The default value is 2  
semitones.Press the [+] button and the [-] button  
simultaneously will set the range value to the  
default.  
Receive  
Select Receive sub-menu. Press the [NEXT]  
button to enter Receive channel setting, The  
LCD displays the current Receive value.  
Use the dial, the [+] button or the [-] button to  
change the channel value from 1 to 16, ALL  
channels. The default value is ALL.  
SPLIT POINT  
In the split point setting, the LCD displays the  
current split point value. Use the dial, the [+]  
button or the [-] button as well as the keyboard  
to change the split point. The parameter ranges  
from 1 to 88. The default value is  
Mixer  
Press the [FUNCTION] button and select  
"MIXER"menu. Press the [NEXT] button. The  
LCD displays Orchestra 1 VOL Orchestra 2  
VOL Orchestra 3 VOL Voice R1 Volume  
034. This function allows you to play different  
voices with your left and right hands by setting  
a split point. With the style playing mode, you  
can play chords below the split point and play  
the melody part in the right area on the  
keyboard.Press the [+] button and the [-] button  
simultaneously to set the value to the default.  
Voice R2Volume  
Voice L Volume  
Bass  
Volume Drum Volume circularly. Use the dial,  
the [+] button or the [-] button to select the  
mixer sub-menu. Press the [NEXT] button to  
enter the parameter setting.  
Style  
In the accompaniment-channel setting, the LCD  
displays Orchestra 1 VOL Orchestra 2 VOL  
Orchestra 3 VOL Bass Volume Drum  
Volume value circularly. The respective default  
values are 27 27 27 28 28.  
PEDALASSIGN  
In the pedal assign setting, the LCD displays the  
current pedal assign name. A total of 5 different  
assigned pedal are available. Use the dial, the [+]  
button or the [-] button to select the pedal assign.  
The LCD displays Sustain Pedal Soft Pedal  
Start/Stop Pedal Tempo/tap Pedal Memory  
Set the value with the dial, the [+] and [-] button  
from0 to 31.In this mode, press the [+] and the  
[-]simultaneously to turn OFF the volume value .  
 
Keyboard  
the [-] button to cycle select the bank (1-8).  
The LCD displays your selected bank number.  
In the keyboard setting, the LCD displays Voice  
R1 Volume Voice R2 Volume Voice L Volume  
value circularly. The default value is 27 28  
12 respectively. Set the value with the dial, the  
[+] button or the[-] button from 0 to 31. In this  
mode, press the [+] and the [-] simultaneously to  
turn off the volume value. Press them again to  
resume the default value.  
Store and load  
Press [STORE] and hold the button, press M1  
(or M2-M6) at the same timee. The data will be  
stored to the M1 (M2~M6), the LCD displays  
the memory number "Bank 1 Memory 1".  
Press [STORE] and [M1] simultaneously while  
the piano powers on, the memory data will be  
set as the default value.  
Language  
Select language menu after entering the  
function menu, press the [NEXT] button to  
enter language setting mode. Use the dial,  
the [+] button or the [-] button to select  
English or Chinese language.  
Note:  
If current data is not the same as the current  
memory data, the corresponding memory icon  
on the LCD will be darkened.  
The default value is English. The language  
setting would not be changed when the power  
is off. When Chinese is selected before  
switching off the piano, the language is set to  
Chinese automatically after turning on the  
piano.  
Note:  
The memory data can be reserved even if the  
piano is switched off. To clear all memory datas  
and restore the default setting, press the  
[STORE] ,[M1] simultaneously before turning  
on the piano. Pressing the [+],[-] button  
simultaneously can also clear the memory data,  
but it will clear all other saved setting such as  
recorded data as well.  
Press the [+] and the [-] simultaneously while  
power is on, the language will be set as the  
default one.  
Date stored in memory  
Voice Data  
Memory  
Voice On/Off: Voice R1, Voice R2, and Voice  
Memory allows you to save virtually all panel  
settings to a registration memory setting, and  
then instantly recall your custom panel settings  
by pressing a single button.  
Lower  
Voice Number: Voice R1, Voice R2, and Voice  
Lower  
Effect On/Off: DSP, Touch, Sustain, Harmony  
Function:  
Digital Effect Parameter, Utility  
Parameter (except Split Point)  
Transpose : Transposer Value  
ACCOMP Data  
Bank  
Memory provides up to 48 complete control  
panel setups (8banks,6 setups each) that can  
be recalled instantly during your performance.  
The default value is bank 1.Press [BANK]  
button to select your desired bank. The LCD  
displays BANK number. Use  
Style Number, Tempo Parameter, A.B.C On/Off,  
Split Point, ACCOMP Volume, Normal/Variation  
Status.  
Other Data  
Midi Parameters  
Function.  
&
Mixer Parameters in  
the bank button again, dial, the [+] button or  
 
When the style is playing, press the [O.T.S]  
button to turn on the O.T.S. It will automatically  
insert "FILL A'' or " FILL B" according to the  
memory number.  
Freeze  
When the FREEZE function is engaged,  
selecting a different memory setup will not  
change any of the accompaniment and Voice L  
parameters (all other parameters will changes as  
programmed). This allows you to use the auto  
accompaniment and select different memory  
setups without suddenly disturbing the flow of  
the accompaniment.  
Press the [O.T.S] button again to exit O.T.S  
mode.  
The parameters stored in the O.T.S includes  
VOICE R1, VOICE R2, VOICE LOWER, their  
OCTAVE and VOLUME and CHORUS  
Press the [FREEZE] button. The [FREEZE]  
LED lights. Press the [FREEZE] button  
again to exit from the FREEZE mode. The  
[FREEZE] LED turns off.  
TYPE/LEVEL, REVERB TYPE/LEVEL value.  
Note:  
Pressing the [O.T.S] button will not insert the  
"Fill in" when the user song is being recorded.  
In the FREEZE setting, press one of the [1] -[6]  
memory buttons. In this situation, only the  
voice parameter settings memorized to each  
button number are recalled.  
Note:  
Please refer to the MEMORY function to see the  
detail accompaniment data.  
One touch setting Pedal  
One touch setting is a powerful and convenient  
function that lets you instantly reconfigure  
virtually all auto accompaniment related panel  
settings with the touch of a single button.  
In this function, it can load 4 types of parameters  
(M1~M4) which are suitable for the current  
style.  
Various functions can be assigned to the  
footswitch connected to the SUSTAIN jack.  
The polarity of the footswitch can also be  
selected.  
Foot switch  
Press the [FUNCTION] button to enter the  
"UTILITY " menu. Press the [NEXT] button to  
select the pedal assign menu. Press the [NEXT]  
button. LCD displays the " sustain pedal " .Use  
the dial, the [+] button or the [-] button to select  
Press the [O.T.S] button to enter this mode and  
the O.T.S icon on the LCD appears. Press the  
[M1]-[M4] button, it will load four types of  
parameters which are related to the style. M1  
and M2 store the parameters for the normal style, the Soft Pedal, Start/Stop Pedal, Tempo/Tap  
while M3 and M4 store the parameters for the  
variation style. A.B.C mode is set to on  
automatically while the O.T.S is on.  
Pedal, Memory Select Pedal.  
 
the 328 tones and edit its parameters to create  
your own original sound.  
Sustain pedal  
When pedal assign is set as "sustain pedal " ,  
it has the sustain effect when stepping on the  
pedal. Release it to turn off sustain effect.  
Press the [SYNTH] button. The SYNTH icon  
appears on the LCD. The User Voice number  
"USER Voice = 342 " displays on the lattice  
area. Then, select the desired number with  
the dial, the [+]/[-] button between 342-350 for  
storing your own voice.  
Soft pedal  
When pedal assign is set to "soft pedal ", it  
has the dampens the sound when stepping on the  
pedal.  
Press the [NEXT] button. The PCM Voice  
number "PCM Voice = 001 " is highlighted  
on the lattice area. Then, select the desired voice  
with the dial, the [+]/[-] button between 001-328  
to adjust its parameters.  
Start/stop pedal  
When pedal assign is set to "start/stop pedal",  
the pedal has the same function as the  
[START/STOP] button.  
Press the [NEXT] or the [BACK] button to  
select these parameters: Vibrate Rate, Vibrate  
Depth, Vibrate Delay  
,
Envelope. Attack,  
Tempo/Tap pedal  
Envelope. Decay, Envelope. Release. The name  
& value of current parameter are highlighted on  
the lattice area. You can adjust the parameters  
with dial, the [+] & the [-], and [0]-[9] button  
between 000~127.  
When pedal assign is set to "Tempo/Tap Pedal  
" ,the ACCOMP tempo will be set as last two  
beat tempo before you press the pedal. If the  
tempo is over (below) than 280 (30), set the  
tempo to 280(30).  
Press the [+] & the [-] button at the same time to  
reset the parameter to the default value 64 of  
each parameter. You can play the keyboard to  
hear the effect while changing the parameters.  
(See "Parameters table for SYNTH ").  
Note:  
If you step the pedal successively when the style  
is playing, the keyboard will count the tap tempo  
according to the last beat you stepped on the  
pedal.  
Press the [SYNTH] button or press the [NEXT]  
and the [BACK] button synchronously to exit  
the SYNTH function. Then the SYNTH flag on  
LCD goes out. A name and its number of the  
User Voice selected above will display on the  
voice line of lattice area.  
Memory select pedal  
If pedal assign is set to "memory select pedal",  
it will load the 48 memory parameter starting  
from M1-M6 when stepping on the pedal.  
Volume pedal. Various functiosn can be assigned  
to the volume connected to the VOLUME jack.  
The polarity of the foot controller can also be  
changed. Step on the volume pedal to control the  
volume.  
All the parameters in SYNTH function can be  
memorized while the power is off. Press the  
[STORE] & [SYNTH] button at the same time to  
reset the parameters to the default value.  
Note:  
Synth  
The SYNTH function provides the tools for  
After entering a [SYNTH] function, you are not  
allowed to exit by pressing a button.  
To edit other parameters, press the [NEXT] or  
creating new tones. Simply select one of  
 
the [BACK] button in edit mode.  
It will quit the ABC mode automatically when  
you enter the SYNTH status.  
Parameters table for SYNTH as follow:  
Parameter Name  
USER Voice  
Value  
Default  
Range  
342-350  
001-328  
342 343 344 345 346 347 348 349 350  
PCM Voice  
001 021 024 033 040 050 080 029 130  
Vibrate Rate  
Vibrate Depth  
64  
64  
64  
64  
0
0
0
0
0
0
127  
127  
127  
127  
127  
127  
Vibrate Delay  
Envelope.Attack  
Envelope.Decay  
Envelope.Release  
64  
64  
mode by pressing the [DEMO] button.  
Album  
There are 100 album songs in all (see  
"APPENDIX 6 album list" ). These parameters  
can not be changed. They include VOICE R1/R2,  
But, it can not return to the STYLE status after  
stopping to play the demo.  
DSP,  
accompaniment  
type,  
OCTAVE,  
HARMONY etc.  
Record  
Press the [ALBUM] button. The ALBUM icon  
on the LCD is illuminated. ABC mode is turned  
on and placed in the SYNC START state. The  
number and its name of the current song is  
highlighted on the top line of lattice area. You  
can select songs with the dial,[+],[-] & [0]-[9]  
button. The song starts to play after playing the  
keyboard in the LH chord area.  
There are 2 songs named User Song 1& User  
Song 2 that can be recorded. Every song  
includes 1 ACCOMP track & 4 MELODY tracks.  
Recorded data can be stored while power is off.  
Press the [RECORD] & the [PLAY] button at  
the same time before turning on the power. All  
the recorded data will be erased.  
Note:  
You can change the tempo while the album song  
Record function does not function while it is in  
is playing. Press the [TEMPO+] and the [Tempo-] user voice mode. The recordable voice range is  
button simultaneously to set the tempo to the  
default of each album song.  
001 341.  
PCM voice can be recorded..  
You can not enter the RECORD function while  
style & album is playing.  
To exit the album modes, press one of the  
following buttons: [STYLE], [VOICE], [DUAL], Reset the TUNE & TRANSPOSE parameters  
[LOWER VOICE], [SYNTH],  
[O.T.S.].  
[M1]~[M6],  
while waiting for record.  
Metronome can be used while recording or  
playing the song.  
You can exit the ALBUM and enter the  
RECORD mode by pressing the [RECORD]  
button while ALBUM is not playing.  
Press the [DEMO] button during recording. It  
will exit the RECORD and enter the DEMO  
mode. The recorded data is not lost.  
You can exit the ALBUM & enter the DEMO  
 
Stop Automatically  
Record start  
Press the [ENDING] button when the style is  
playing during recording. It will stop recording  
automatically after the ending playing is over.  
Prepare to record  
Select user song: Press the [RECORD] button.  
The REC icon on LCD is illuminated. User Song  
1 or User Song 2 is displayed on the lattice area.  
Its cursor on the LCD is lit, then you can select it  
with dial, the [+]/the [-] button.  
If the capacity is full during recording, it will  
stop recording automatically with displaying  
"Full Record Data!" on LCD .  
Wait for record: Press the [RECORD] button  
after choosing User Song 1 or User Song 2.Four  
beats on the LCD flash simultaneously, which  
indicates that the recording is waiting. You can  
select desired recording track with the  
Stop Manually  
Press the [RECORD] button again during  
recording to stop recording immediately. The  
cursor of the recorded track is lightened.  
[ACCOMP],[MELODY  
1]-[MELODY  
4]  
Press the [DEMO] button in recording to stop  
recording and enter the DEMO mode. The data  
recorded will not be lost. The cursor of the  
recorded track is lightened.  
buttons. Its cursor flashes once selected.  
Note:  
You can select simultaneously an ACCOMP  
track & one MELODY track, but you are not  
allowed to select 2 MELODY tracks at the same  
time.  
Record play  
Song select  
Press the [PLAY] button. User song 1 or user  
song 2 is displayed on the LCD. You can select  
the desired song with the dial, the [+] & the[-]  
button.  
MELODY 1 is automatically set to current track  
while it is in waiting mode. If the first MELODY  
includes data, the second MELODY is set to  
record automatically.  
Track select  
Select the desired tracks with the [MELODY  
1]-[MELODY 4] and the [ACCOMP] button  
after having selected the song. The lightened  
cursor indicates the track is going to be played.  
If the cursor is not lit, it indicates the track is  
empty .  
If the track includes data, its relevant cursor on  
LCD is lit. Press the track button while it's in  
waiting mode. Then, the cursor on the LCD turns  
off. Press the track button again. Its cursor  
flashes, indicating that the track is available for  
recording.  
Song play  
Start to record  
Press the [PLAY] button to play the song after  
selecting tracks. Press it again to stop playing.  
If the user song is empty, "Song Empty" displays  
temporarily on the LCD.  
You can start to record by playing the keyboard  
and pressing the [START/STOP]button. Four  
beats flash in turn and follow the current tempo.  
The recorded data in current track will be  
covered with new data during recording. During  
recording, you can start or stop the style by  
pressing the [START/STOP] button two times.  
If no track is selected, "Select a Track"  
displays temporarily on the LCD.  
Record stop  
 
The MEASURE and the BEAT areas display  
nothing. To stop playing the files, press the  
[START/STOP] button.  
SMC  
There is a standard SMC (SmartMedia Card)  
external interface which supports cards of  
6MB/32MB/64MB/128MB capability on the  
piano. It is compatible with the file system  
format of the MS-DOS FAT 12/16. Press the  
[LOAD], [SAVE], [UTILITY] button separately  
to enter the relative function. The SMC Icon is  
illuminated on the LCD. If there is no card, "NO  
SM Card" will display for three seconds, then  
exit & return to the previous status.  
When the file is playing, you can select the other  
files with the dial or the [+] & the [-] button,  
then press the [START/STOP] button to stop or  
press the [START/STOP] again to play the new  
file.  
When the file is playing, you can adjust the  
tempo with the [TEMPO +],[TEMPO -] button.  
Press the [TEMPO +],[TEMPO -] button at the  
same time, the current tempo will be set to the  
default tempo.  
Load file  
Press the [LOAD] button. The SMC icon is  
illuminated on the LCD. Three file types which  
will be loaded and will be displayed on the  
lattice area. The current type is highlighted. You  
can select types with the dial or the [+] & the [-]  
button.  
Note:  
If the track number of the file is over 24,"File  
Track Error" will be displayed temporarily on  
LCD and it will exit SMC status.  
If the tick number of one beat is over 960 or  
below 24, "File Format Error" will be displayed  
temporarily on LCD and it will exit SMC status.  
If there is no file in the SMC, it will display "No  
File Found", and return to previous menu by  
pressing the [BACK] button.  
If the file is not a MIDI format, "Not Midi File"  
will be displayed temporarily on the LCD and it  
will exit SMC status.  
Load MIDI File  
Select the menu "Load MIDI File" & press the  
[NEXT] button. The playing modes are  
displayed on the lattice area. They're "Single  
Play" & "Chain Play". the current mode is  
highlighted. Single Play means only playing the  
current file repeatedly. Chain Play means  
playing all the files circularly. You can select  
your desired mode with the dial or the [+] & the  
[-] button.  
Load Memory File  
Select the menu "Load Memory File" & press  
the [NEXT] button. All the MEMORY files in  
the root of SMC are displayed on the lattice area  
with two lines. The current file is highlighted.  
The main name of the file includes 8 characters.  
The postfix name is MEM. You can select files  
with dial or the [+] & the [-] button.  
Press the [NEXT] button. All the MIDI files in  
the root of SMC are displayed on the lattice area.  
The main name of the current file is highlighted.  
It includes 8 characters. The postfix name is  
MID. You can select files with dial or the [+] &  
the [-] button.  
Press the [NEXT] button to load the file, then  
the data will overwrite all the memories,  
"Operation Completed" is displayed temporarily  
on the LCD. It will exit the SMC function and  
return to the previous state.  
Press the [START/STOP] button to start playing  
the file selected. The SMC icon flashes. The  
current tempo is displayed in the TEMPO area.  
Load Song File  
Select the menu "Load Song File" and press the  
[NEXT] button. All the RECORD files in the  
 
root of SMC are displayed on the lattice area  
with two lines. The current file is highlighted.  
The main name of the file includes 8 characters,  
the postfix name is REC. You can select songs  
with dial or the [+] & the [-] button.  
with two lines. You can select them with the dial  
or the [+] & the [-] button. Then press the  
[NEXT] button. "A_______.REC" is displayed  
in the lattice area. The letter A flashes which  
indicates the input state (input method see  
"3.file name input " below). Press the [NEXT]  
button again to end the input. The recording data  
will be saved in the root of the SMC. "Operation  
Completed" is displayed temporarily on the LCD  
and it will exit the SMC function and return to  
the previous state.  
Press the [NEXT] button to affirm the desired  
file. The menu of "Load Into Record 1" and  
"Load Into Record 2" are displayed on the lattice  
area with two lines. The current one is  
highlighted. You can select them with dial or the  
[+] & the [-] button.  
File name Input  
Press the [NEXT] button. The data will be  
loaded into the user song 1 or 2. "Operation  
Completed" is displayed temporarily on the LCD  
and it will exit SMC function and return to the  
previous status. The relative user song and tracks  
icon will be illuminated at the same time.  
File name includes 1-8 characters to be input  
with the keyboard .  
[SHIFT]: 26 letters will be displayed with  
capital letters by pressing the  
keyboard in the letter area directly.  
To display small letters, press the  
[SHIFT] button hold on.  
Save file  
[DELETE]: when the flashing cursor is at the  
last character (the eighth bit),  
press it to erase the current  
character. Otherwise, it will erase  
the left character.  
Press the [SAVE] button. The SMC icon is  
lightened on LCD. Two file types that can be  
saved are displayed on the lattice area with two  
lines, the current type is highlighted. You can  
select them with dial or the [+] & the [-] button.  
[BACK ]: move the current cursor to the left.  
[NEXT]: move the current cursor to the right.  
Save Memory Data  
Select the "menu Save Memory Data" and press  
the [NEXT] button, "A_______.MEM" is  
displayed on the lattice area .The letter A flashes  
which indicates the input state (input method see  
"3.file name input" below). Press the [NEXT]  
button again to end the input.  
In file name input state, "A_______.MEM" or  
"A_______.REC" is displayed on the lattice area  
and the letter A flashes.  
If there's nothing input, letter A will be saved as  
the file name by pressing the [NEXT] button. If  
you input the first character with keyboard, it  
will be displayed on LCD. The cursor moves to  
the right & flashes, which indicates the input  
state to be continued. When the last character &  
cursor are displayed and flashed, the file name is  
over 8 bits character.  
The file includes 48 memories' data will be  
saved to the root of the SMC. "Operation  
Completed" is displayed temporarily on the LCD  
and it will exit the SMC function and return to  
the previous state.  
Save Song File  
You can edit the characters input with the  
[SHIFT],[DELETE], [BACK ],[NEXT] button  
when inputting the character .  
Select the menu "Save Song " & press the  
[NEXT] button. The menu of "Save Song 1 "  
"Save Song 2 " are displayed in the lattice area  
 
Press the [NEXT] button to end the filename  
input, "Operation Completed" is displayed  
temporarily on LCD and it will exit the SMC  
function to return to the previous status  
Note:  
If there is no file in SMC, it will display "No  
File Found", you may return to previous menu  
by pressing the [BACK] button.  
Note:  
Format  
If the filename input is same as the name that is  
in the card, "Exist File Name" is displayed  
temporarily on the lattice area and it will exit the  
SMC mode and return to the previous status.  
Select the menu "Format" & press the [NEXT]  
button. "Are You Sure?" is displayed on the  
lattice area.  
Press the [NEXT], [+] button separately to  
affirm it. The card will be formatted. "Operation  
Completed" is displayed temporarily on the LCD  
& exit the SMC mode to return the previous  
state.  
If there is nothing to be input, "Invalid File  
Name" is displayed temporarily on the lattice  
area and it will exit the SMC mode to return the  
previous state.  
If there is not enough space in the card after  
input, "SMC Card Full!" is displayed  
temporarily on the lattice area and it will exit the  
SMC mode to return to the previous state.  
If you press the [BACK], [-] button separately,  
it will cancel the operation.  
Utility  
MIDI  
What is MIDI  
Press the [UTILITY] button. The SMC icon is  
illuminated on the LCD. Two tools are displayed  
on the lattice area with two lines. The current  
type is highlighted. You can select them with the  
dial or the [+] & the [-] button.  
MIDI is the abbreviation for “Musical  
instrument Digital Interface”. It is a standard  
interface for communication between computers,  
perifpherals & digital music instruments.  
There are two MIDI connections on your piano,  
including MIDI IN & MIDI OUT ports.  
Delete One File  
Select the menu "Delete One File" & press the  
"NEXT" button. All the files in the root of SMC  
are displayed on the lattice area with two lines.  
The current file is highlighted. You can select  
them with dial or [+],[-] button.  
MIDI Connection  
Connection rules  
Midi connection is the equipment called "Host  
equipment", which controls another one called  
"affiliated equipment".  
Press the [NEXT] button again, "Are You Sure?"  
is displayed on the lattice area. Press the  
The host equipment's MIDI OUT connects with  
[NEXT], [+] button separately or dial to affirm it, affiliated equipment's MIDI IN  
"Operation Completed" is displayed temporarily  
on the LCD and it will exit the SMC mode to  
return to the previous status.  
Note that MIDI OUT cannot connect with MIDI  
IN on the same equipment.  
Sample Connection method  
If you press the [BACK], [-] button separately ,it  
will exit the operation and previous mode.  
Connect the MIDI interface with your PC.  
Connect the MIDI interface with other digital  
 
music instruments.  
create new file in the sequencer software on the  
PC.The piano will receive the data from the  
sequencer. You can play on the piano at the same  
time. MIDI messages that are recognized by the  
Major Application  
The piano as the Host  
Connect the MIDI OUT port of the piano with  
MIDI IN port of other equipment.  
piano.  
(See  
"appendix  
7
MIDI  
IMPLEMENTATION CHART".)  
If the same MIDI channels be set to the two  
devices, play the keyboard & change the  
parameters on the piano, then the other device  
will receive the data from it. MIDI messages are  
sent from the piano. (See "appendix 7 MIDI  
IMPLEMENTATION CHART".)  
Help  
The HELP function provides you a simple  
operation guide for the current status – just press  
and hold the [HELP] button.  
The piano as the slave  
Relative contents are displayed on the lattice  
area & then it goes to the next screen  
automatically.  
Connect the MIDI IN port of the piano with  
MIDI OUT port of external device.  
If the same MIDI channels are set to the two  
devices, play the keyboard & change the  
parameters on the external device, then the piano  
will receive the data from it. You can play on the  
piano at the same time. MIDI messages are  
received by the piano. (See "appendix 7 MIDI  
IMPLEMENTATION CHART".)  
You may browse the next or previous contents  
with the [NEXT], [BACK] button or dial.  
Release the [HELP] button to exit HELP and  
back to the previous status.  
Connect the MIDI interface with PC and use  
sequencer software  
Connect the MIDI IN & MIDI OUT port of the  
piano to your PC. Record the MIDI messages on  
the sequencer software on the PC by playing on  
the piano. Edit the MIDI messages recorded or  
Status  
Procedure  
Display  
Press the [DEMO] button to enter Press [+],[-] or use dial to select demo. Press  
DEMO  
Demo status  
[DEMO] for a while to single play.  
Press the [VOICE] button to enter  
voice status, the LCD will display:  
VOICE  
VOICE R1  
VOICE R2  
Press [+],[-],the dial or the number button to  
select voice.  
Press the [VOICE] button to enter  
voice status, then the LCD will  
display: VOICE  
VOICE L  
STYLE  
Press the [LOWER VOICE] button  
to enter VOICE L mode.  
Press the [STYLE] button to enter Press [+],[-],the dial or the number button to  
STYLE mode. select style.  
Press the [ALBUM] button to enter Press [+],[-],the dial or use dial to select song.  
ALBUM mode. Then, start the style by playing a chord on the  
ALBUM  
 
keyboard.  
Press the [SYNTH] button to enter Press [+],[-],the dial or use dial to select an user  
SYNTH mode.  
voice. Press [NEXT] button to set the  
parameter.  
SYNTH  
Press [+],[-],the dial, the dial or the number key  
Press the [NEXT] button after to change the parameter. Press [NEXT] or  
entering SYNTH mode to select [BACK] button to change to another parameter.  
parameter.  
Press the [NEXT] and [BACK] simultaneously  
to exit the SYNTH menu.  
Press [+],[-] button to select in current menu  
Press the [FUNCTION] button to level. Press [NEXT] to turn into current option;  
FUNCTION enter function mode.  
Press [BACK] to back the higher level menu;  
Press the [NEXT] and [BACK] will  
simultaneously exit the menu.  
Press [+],[-] button to select in current menu  
Press the [LOAD] button to load level. Press [NEXT] to turn into current option;  
the files from SMC.  
Press [BACK] to back the higher level menu;  
Press the [NEXT] and [BACK] will  
simultaneously exit the SMC menu.  
Press [+],[-] button to select a MIDI file;  
Press [START/STOP] to play the MIDI file  
you select; Press [BACK] to back to last step.  
Press [+],[-] button to select in current menu  
LOAD  
To load MIDI format files.  
To load RECORD or MEMORY level. Press [NEXT] to turn into current option;  
files.  
Press [BACK] to back the higher level menu;  
Press the [NEXT] and [BACK] will  
simultaneously exit the SMC menu.  
Press [+],[-] button to select in current menu  
Press the [UTILITY] button to level. Press [NEXT] to turn into current option;  
UTILITY  
enter UTILITY mode.  
Press [BACK] to back the higher level menu;  
Press the [NEXT] and [BACK] will  
simultaneously exit the SMC menu.  
Press [+],[-] or use dial to select the file. Press  
[NEXT]/[+] to confirm deleting or formatting  
the file.  
Delete the file.  
Format the SMC.  
Press [NEXT] to confirm the operation, press  
[BACK] to exit the operation.  
Press the [SAVE] button to save the Press keyboard to select letter and move the  
files to SMC.  
cursor, press [NEXT] to confirm the input,  
press [BACK] to last step.  
SAVE  
Input file name.  
Press [+],[-] or use the dial to select user song 1  
or 2.  
Press the [RECORD] button to  
enter real time record.  
Press [+],[-] or use the dial to select user song 1  
or 2.  
RECORD  
 
Press [MELODY 1-4],[ACCOMP] to select  
tracks to record; Play the keyboard to start  
recording and press [REC] again to quit  
recording.  
Press the [RECORD] button to  
prepare for recording.  
PLAY  
Press the [PLAY ] button first.  
Press [+],[-] or use the dial to select user song 1  
or 2.  
Specifications  
Keyboard  
88 hammer action keys  
Voice  
350 Voices  
Style  
130 Styles  
Demo Song  
Album Song  
Display  
3 Demo songs  
100 Album songs  
Multi-functional LCD display with blue backlight  
POWER SWITCH, MASTER VOLUME , BRILLIANCE ,  
ACCOMP VOLUME+/-,TEMPO+/-, HELP, SMC LOAD,A.B.C.  
NEXT,BACK,UTILITY,SAVE,VOICE,LOWER VOICE,STYLE,  
ALBUM,DEMO,DSP,DUAL,FUNCTION,O.T.S.,FREEZE,  
SUSTAIN,TRANSPOSE,HARMONY,SYNTH,TOUCH,BANK  
STORE,M1-M6  
Switch and Buttons  
Accompaniment Control  
START/STOP, INTRO, FILL-IN A, FILL-IN B,ENDING,  
SYNC START, SYNC STOP  
Sequencer  
Panel Memory  
Pedals  
ACCOMP, MELODY1/2/3/4, RECORD,PLAY  
48 Memory Storage  
SUSTAIN,VOLUME  
Connectors  
DC 12V, PHONE1/2, AUX.IN,AUX.OUT L/MONO,  
AUX.OUT R, MIDI IN/OUT,2 PEDALS  
4ohm 15w x 2  
Speaker  
Dimension  
Weight  
1360(L)x345(W)x138(H)mm  
23.5kg  
Appendix 1- Voice list  
071  
Piano  
Ensemble  
213 Tenor Sax 4  
214 Tenor Sax 5  
215 Tenor Sax 6  
281  
282  
283  
284  
285  
Percussive Organ 5  
Rock Organ  
Pipe Organ 2  
Wood Block  
Taiko Drum  
Tom Drum  
Melodic Tom  
Reverse Cymbal  
001 Piano 1  
142  
072  
073  
074  
075  
076  
077  
078  
079  
080  
081  
Strings Ensemble1  
002 Piano Soft  
003 Piano Tender  
004 String &Piano 1  
005 String &Piano 2  
006 Piano MEL  
007 Bright Piano  
008 Stereo Piano  
009 Honky Tonk  
010 Dual Piano  
011 AD EP 1  
143 Strings Ensemble2  
144 Sound Track 1  
145 Sound Track 2  
146 String For Melody  
147 Sound Track 3  
148 String Oct Down  
149 Slow Strings  
150 Hero String  
151 Synth String 1  
152 Synth String 2  
216  
217 Baritone Sax 1  
Sweet Organ 2  
Church Organ 1  
Church Organ 2  
Church Organ 3  
Reed Organ  
Accordion1  
Accordion2  
Accordion3  
Sax & Brass  
218 Baritone Sax 2  
219 Oboe  
220 English Horn  
Sound effects  
286  
287  
Guitar Fret Noise  
Breath Noise  
Seashore  
Bird Tweet  
Telephone Ring  
Helicopter  
221 Wood Winds 1  
288  
222 Wood Winds 2  
223  
Bassoon  
224 Clarinet 1  
225 Clarinet 2  
226 Clarinet 3  
227  
Clarinet 4  
228 Wood Winds 3  
289  
290  
291  
292  
293  
082 Harmonica1  
012 4P Piano1  
013 Coffer Piano  
014 Last Year EP  
015 EP Cup  
083  
084  
085  
086  
087  
088  
153  
Harmonica2  
Harmonica3  
Accordion4  
Accordion5  
Accordion6  
Accordion7  
Synth String 3  
Applause  
Gunshot  
154 Synth String 4  
155 Synth String 5  
156 Synth String 6  
157 Synth String 7  
158 Synth String 8  
159 Aahs  
160  
161 Voices  
162 Choir  
163 Poem Dream  
164  
165 Electric Voice  
166 Doooooo  
167 Dream Voice  
168 hummmm  
Chinese instrument  
Pi Pa  
Yue Qin  
Da Ruan  
Zhong Ruan  
LiuQin  
GuQin  
GuZheng  
Yang Qin  
Du Xian Qin  
Re Wa Pu  
San Xian  
Er Hu  
Gao Hu  
Zhong Hu  
Ban Hu  
294  
295  
296  
297  
298  
299  
300  
301  
302  
303  
304  
305  
306  
307  
308  
309  
016 EPAir  
Pipe  
017 Image EP  
018 Snow EP  
019 Electric Piano  
229 Piccolo  
230 Flute 1  
231 Flute 2  
232 Flute 3  
233 China Flute  
234 Recorder 1  
235 Recorder 2  
236  
Pan Flute  
237 Kawala  
238 Bottle Blown  
Guitar  
Ooh Voices  
089 Nylon Guitar 1  
090 Nylon Guitar 2  
091 Guitar PAD  
092 Steel Guitar 1  
093 Steel Guitar 2  
094 Ukulele  
095 Jazz Guitar  
096 Bright Clean Gtr1  
097 Clean Guitar  
098 Bright Clean Gtr2  
099 Muted Guitar 1  
100 Muted Guitar 2  
020 EP wr  
021 H&H EP  
022 Digital Piano  
023 El Piano  
024 U Style EP  
025 Digital EP  
026 Wind EP  
027 Silence EP  
028 Oh! Sweet EP  
029 KMS EP  
030 Mr. Smith  
031
Fire EP  
Ohhhhh  
239 Shakuhachi 1  
240 Shakuhachi 2  
241 Shakuhachi 3  
169 Vintage Vox 1  
170 Vintage Vox 2  
 
171  
Sky Vox 1  
1
7
2
S
ky
 
Vox 2  
242 Hichiriki  
Xi Pi  
Appendix 2- Style list  
8 Beat  
001  
039  
Techno  
077  
078  
079  
Mambo2  
Bounce  
Foxtrot  
116 Dai Minority  
8 Beat 1  
8 Beat 2  
Swing & Jazz  
117 Weiwuer Minority  
118 Tibat Minority  
002  
040  
BigBand Ballad  
003  
004  
005  
006  
007  
008  
16Beat  
009  
010  
011  
8 Beat 3  
041  
042  
043  
044  
045  
046  
047  
R&B  
048  
049  
Jazz Ballad  
BigBandBoogie  
Boogie  
080  
081  
Quick Step  
Jive  
119 Korea M inority  
120 Mongolia  
8 Beat 4  
8 Beat 5  
Traditional  
121 Dongbei Yangge  
122 Dongbei Errenzhuan  
123 Shan Dong  
124 He Nan  
8 Beat 6  
Swing1  
082  
083  
084  
085  
086  
087  
088  
March 1  
8 Beat Rock  
8 Beat Pop  
S wing2  
March 2  
Dixieland  
JazzTrio  
German March  
6/8 March  
Polka1  
125 An Hui  
16 Beat 1  
16 Beat 2  
16 Beat 3  
126 Shan Xi  
127 Shan Bei  
128 Yun Nan  
129 Shang H ai  
130 Tai Wan  
R&B 1  
R&B 2  
Polka2  
Polka Pop1  
012  
013  
Hip Hop  
050  
Soul  
089  
Polka Pop2  
16 Beat Funk  
051  
Soul S huffle  
Waltz  
014  
015  
FunkPop  
Fusion  
Country  
090  
Waltz 1  
 
052 Country 091 Waltz 2  
Appendix 3- Chord list  
 
Chord Name [Abbreviation]  
Major[M]  
Normal Voicing  
1-3-5  
Chord(C) Display  
C
C
Major sixth [6]  
1-(3)-5-6  
C6  
C6  
Major seventh [M7]  
1-3-(5)-7  
CM7  
CM7  
Major seventh add sharp eleventh [M7(#11)] 1-(2)-3-#4-(5)-7  
CM7(#11)  
CM(9)  
CM7(9)  
C6(9)  
Caug  
CM7(#11)  
CM(9)  
CM7(9)  
C6(9)  
Caug  
Major add ninth [M9]  
1-2-3-5  
Major seventh ninth [M7(9)]  
Sixth ninth [6(9)]  
1-2-3-(5)-7  
1-2-3-(5)-6  
1-3-#5  
Augmented [aug]  
Minor [m]  
1-b3-5  
Cm  
Cm  
Minor sixth [m6]  
1-b3-5-6  
Cm6  
Cm6  
Minor seventh [m7]  
1-b3-(5)-b7  
1-b3-b5-b7  
1-2-b3-5  
Cm7  
Cm7  
Minor seventh flatted fifth [m7b5]  
Minor add ninth [m(9)]  
Minor seventh ninth [m7(9)]  
Minor seventh add eleventh [m7(11)]  
Minor seventh [mM7]  
Cm7b5  
Cm(9)  
Cm7(9)  
Cm7(11)  
CmM7  
CmM7(9)  
Cdim  
Cm7b5  
Cm(9)  
Cm7(9)  
Cm7(11)  
CmM7  
CmM7(9)  
Cdim  
1-2-b3-(5)-b7  
1-(2)-b3-4-5-(b7)  
1-b3-(5)-7  
1-2-b3-(5)-7  
1-b3-b5  
Minor major seventh ninth [mM7(9)]  
Diminished [dim]  
Diminished seventh [dim7]  
Seventh [7]  
1-b3-b5-6  
1-3-(5)-b7  
1-4-5-b7  
Cdim7  
C7  
Cdim7  
C7  
Seventh suspended fourth [7sus4]  
Seventh flatted fifth [7b5]  
Seventh ninth [7(9)]  
C7sus4  
C7b5  
C7sus4  
C7b5  
1-3-b5-b7  
1-2-3-(5)-b7  
1-2-3-#4-(5)-b7 or  
1-(2)-3-#4-5-b7  
1-b2-3-(5)-b7 or  
2-3-5-6-b7  
1-b2-3-(5)-b7  
1-3-5-b6-b7  
1-#2-3-(5)-b7  
1-(3)-#5-7  
1-3-#5-b7  
1-4-5  
C7 (9)  
C7(#11)  
C7(9)  
C7(#11)  
Seventh add sharp eleventh [7(#11)]  
Seventh add thirteenth [7(13)]  
C7 1(13)  
C7(13)  
Seventh flatted ninth [7(b9)]  
Seventh add flatted thirteen [7(b13)]  
Seventh sharp ninth [7(#9)]  
Major seventh augmented [M7aug]  
Seventh augmented [7 aug]  
Suspended fourth [sus4]  
C7(b9)  
C7(b13)  
C7(#9)  
CM7aug  
C7aug  
C7(b9)  
C7(b13)  
C7(#9)  
CM7aug  
C7aug  
Csus4  
C
Csus4  
One plus two plus five [1+2+5]  
1-2-5  
C1+2+5  
Appendix 4- Demo list  
Name  
NO  
 
01  
02  
03  
World  
Jazz  
Trance  
Appendix 5- Album list  
001 Blessing  
035 The Pleasant One Draws One  
Dose Of Thai Nurse's Dance  
Musics  
071 Tulip  
002 The Moon Represents My Heart  
003 May I Hug You?  
072 Mary Had A Little Lamb  
073 Morning Of Miaolin  
036 The Long And Arduous Journey  
Is Always A Feeling  
Whether I Should Go Away  
Quietly  
005 Beautly And The Beast  
004  
074 The Countryside Of Moscow  
EVening  
037 Goodbye My Friend  
038 Russian Dance Music  
039 Military March  
040 Barrel Polka Of Beer  
041 Musical Moments  
042 Forest Polka  
075 I've Been Working On The  
Railroad  
006 Londonderry Air  
007 Serenade  
076 Small City Story  
077 PickTte-a leaves And Attack  
Butterflies  
008 Swan Lake  
009 Joy To The World  
010 Pizzicato Polka  
011 It Will Be Better Tomorrow  
012 Canon  
078 Grandfather s Clock  
079 Jingles Bells  
043 Annen Polka  
044 Wave Waltz Of The Danube  
045 Mandarin Duck's Tea  
046 The Entertainer  
047 The Heart Is Too Soft  
048 Emperor's Waltz  
049 Brahms Waltz  
080 Dance Of The Crown  
081 Yankee Doodle  
082 Row The Boat  
083 Curfew  
013 Pianosonatan Op8 IN Cm IN  
Pathetique  
014 Ghost  
015 Will You Still Love Me Tomorrow  
016 I Only Mind You  
017 Foolish Child  
084 Coca-cola  
085 Like Rotating  
050 The Sleeping Beauty  
051 Living By Night  
052 Our Time  
086 New Mandarin Duck's  
Butterfly's Dream  
018 I Have Nothing  
019 Friend  
087 Twinkle Twinkle Little Star  
088 Kuckuckswalzer  
053 La Traviata  
020 Tokyo Love Story  
021 Horse Race  
054 My Heart Will Go On  
055 Half A Moon Climbs Up  
056 Blue Love  
089 Raising Your Cover  
090 A Girl From Altai  
022 Mov.2 Adagio Non Troppo Piano  
Sonata No.9 In D  
091 The Guest In The Distant Place  
Invites You To Stay  
057 Green Sleeves  
058 The Ludlows  
023 The Opposite Girl Reads Over  
024 Song Without Words  
025 O'Sole Mio  
092 There's A Nice Place  
093 A La Mu Han  
059 Waterloo Bridge  
060 Only You  
026 The Song Of Naples  
027 Carmen  
094 A Li Long  
061 Aura Lee  
095 Pastoral Song  
062 Oriental Cherry  
063 Memory  
028 My Old Kentucky Home  
029 Dance Music Of Samba  
030 Uungarische Tanz  
031 Jeanie With Blond Hair  
032 Song On The Seashore  
096 Weave The Basket Of Flowers  
097 Fengyang Flower - drum  
098 Nanniwan  
064 Who Can Tell Me  
065 Successor Of The Dragon  
066 Happy Express  
067 Funky Disco  
099 Water Drops Down In The River  
100 Sell The Stuffed Dumplings  
033 Examine One Gram Of Dance  
Musics In The Storehouse  
034 Lambada  
068 Health Song  
069 Stand At Ease And Stand At  
Attention And Stand Well  
070 Machine Cat  
Appendix 6- MIDI implementation chart  
 
***********  
Control  
Change  
0
1
Bank Select  
Modulation  
5
Portamento Time  
Data Entry  
6
7
Volume  
10  
11  
64  
65  
66  
67  
80  
81  
91  
93  
120  
121  
123  
Pan  
Expression  
Sustain Pedal  
Portamento ON/OFF  
Sostenuto Pedal  
Soft Pedal  
Reverb Program  
Chorus Program  
Reverb Level  
Chorus Level  
All Sound Off  
Reset All Controllers  
All Notes Off  
***********  
 
Notes:  
*1  
When the accompaniment is started, an FAH message is transmitted. When  
accompaniment is stopped, an FCH message is transmitted. When an FAH  
message is received, accompaniment is started. When an FCH message is  
received, accompaniment is stopped.  
 

Philips Camcorder CAM200 User Manual
Philips Hair Clippers HQC281 User Manual
Philips Network Card SWV3459W 17 User Manual
Pioneer Blu ray Player BDP 52FD User Manual
Pioneer CD Player CDJ 800MK2 User Manual
Polaris Offroad Vehicle RZR 170 User Manual
Presto Electric Pressure Cooker Pressure Canner and Cooker User Manual
Presto Rice Cooker Rice Cooker User Manual
Proctor Silex Coffeemaker 49311 User Manual
PYLE Audio Music Mixer PYD1808 User Manual