Infrared Remote Control – for Canon
Replaces Canon RC-1/RC-6 Infrared Remote Control
Upper Controls of Remote (For SLR Camera)
S button for camera instant shutter.
2S button for 2seconds delay shutter.
Lower Controls of Remote(For PowerShot Camera)
S button for camera instant shutter.
W/T controls Canon PowerShot zoom
IMPORTANT NOTICE
Your PROMASTER Remote Control features a POWER SAVE mode. Please observe the following to
ensure proper operation:
1. After initially installing the battery or changing the battery, press and hold the shutter release
button for at least 2 seconds to activate the remote.
2. The remote will enter the POWER SAVE mode after 8 minutes of inactivity. To wake the remote
from the POWER SAVE mode and activate it for use, press and hold the shutter release button for
at least 2 seconds.
Using the PROMASTER Infrared Remote Control for Canon
1. Before using the remote for the first time, install the CR2025 battery (included).
2. Mount the camera on a tripod (recommended) or place the camera on a stable, level surface.
3. Set your camera for delayed remote or quick response remote per the instructions provided with
your camera.
4. Aim the remote control at the infrared receiver on the camera (usually within +/- 20 degree of the
lens axis, from the left to the right and from the top to the bottom) and press the shutter-release
button on the remote control. When using the remote outdoors, make sure that the subject is not
backlit and that the line of site between the transmitter and the infrared receiver is not blocked by
the lens or other obstacles.
5. How the camera focuses and shoots depends upon the options selected for your camera. For
further information, check your camera's instruction manual.
6. Infrared cannot be seen by human eyes so you will see no visible light from the LED on the front
of the remote control during operation.
1
Compatible Canon DSLR/SLR Cameras (uses upper controls only)
550D
500D
450D
400D
350D
300D
Rebel XSi
Rebel XTi
Rebel T1i
Rebel T2i
Digital SLR
Rebel T2
Rebel XT
ELAN
50
10
55
30
33
300v
100
Film SLR
APS SLR
300x
3000v QD
Kiss III
Rebel K2
Kiss III L
Rebel T1 Date
A10
Rebel T2 Date
EOX IX
Compatible Canon Power Shot Cameras (uses lower controls only)
Pro 1
G6
G5
G3
Power Shot
G2
G1
S1 IS
S70*
S60*
Pro 90 IS
*Shutter release function only
LIMITED WARRANTY
This product carries a one-year limited warranty from the date of purchase against defects in materials
and workmanship. This warranty does not cover damage resulting from accidents, misuse, unauthorized
repair/alterations to the product or failure to follow operating instructions. If the product should become
defective within the warranty period and under the above mentioned conditions, please return it to the
store you originally purchased it from with proof of purchase, for repair or replacement free of charge.
Code 7599
Made in China
Fairfield, CT 06825
3
|