Model No. PFBE1144.0
Serial No.
USER’S MANUAL
Write the serial number in the
space above for future reference.
Serial Number Decal (Under Seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if a part is
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-888-533-1333
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
new products, prizes,
fitness tips, and much more!
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read the following important precautions
before using the exercise bench.
1. Read all instructions in this manual and all
warnings before using the exercise bench.
Use the exercise bench only as described in
this manual.
7. Keep hands and feet away from moving parts.
8. Wear appropriate clothes when exercising;
do not wear loose clothes that could become
caught on the exercise bench. Always tie
back long hair to prevent it from becoming
caught in moving parts or pulleys. Always
wear athletic shoes for foot protection while
exercising.
2. It is the responsibility of the owner to ensure
that all users of the exercise bench are ade-
quately informed of all precautions.
3. The exercise bench is intended for home use
only. Do not use the exercise bench in any
commercial, rental, or institutional setting.
9. Always make sure the backrest bracket is
fully engaged before using the backrest.
4. Keep the exercise bench indoors, away from
moisture and dust. Place the exercise bench
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around the exer-
cise bench to mount, dismount, and use the
exercise bench.
10. The exercise bench is designed to support a
maximum user weight of 300 pounds.
11. Use the exercise bench only with the includ-
ed resistance or with the resistance included
with a PROFORM Power Pak. The exercise
bench is not designed to be used with
weights.
5. Make sure all parts are properly tightened
each time the exercise bench is used.
Replace any worn parts immediately.
12. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cool-
ing down.
6
Keep children under 12 and pets away from
the exercise bench at all times.
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
3
BEFORE YOU BEGIN
®
Thank you for selecting the versatile PROFORM
number is PFBE1144.0. The serial number can be
COREMASTER exercise bench. The exercise bench is found on a decal attached to the exercise bench (see
designed to develop the abdominal muscle group.
Whether your goal is to tone your body, build dramatic
muscle size and strength, or improve your cardiovas-
cular system, the exercise bench will help you to
achieve the specific results you want.
the front cover of this manual for the location of the
decal).
To avoid a registration fee for any service needed
under warranty, you must register the exercise
For your benefit, read this manual carefully before
using the exercise bench. If you have questions after Before reading further, please review the drawing
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before calling. The model
below and familiarize yourself with the parts that are
labeled.
Handle
ASSEMBLED
DIMENSIONS:
Height: 45 in.
Width: 23 in.
Length: 55 in.
Backrest Pad
Seat
Front Frame
Backrest Pivot Frame
4
ASSEMBLY
• As you assemble the weight bench, make sure all
Make Things Easier for Yourself
parts are oriented as shown in the drawings.
Everything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by anyone. Most people find that by
setting aside plenty of time, assembly will go
smoothly.
• For help identifying small parts, use the PART
IDENTIFICATION CHART.
The following tools (not included) may be
required for assembly:
As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
• Two adjustable wrenches
• One rubber mallet
Before beginning assembly, carefully read the
following information and instructions:
• One standard screwdriver
• One Phillips screwdriver
• Assembly requires two persons.
• Clear tape or masking tape, and soapy water.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
1.
1
Before beginning, make sure you under-
stand the information in the box above.
Note: Some parts described in the assem-
bly steps may be pre-assembled.
1
25
Press two Stabilizer Endcaps (17) onto the Front
Stabilizer (4).
17
25
4
Attach the Front Stabilizer (4) to the Front Frame
(1) with two M8 x 70mm Button Bolts (25), two
M8 Washers (34), and two M8 Nylon Locknuts
(31). Do not tighten the Locknuts yet.
34
31
17
34
2. Press two Stabilizer Endcaps (17) onto the Rear
Stabilizer (3).
2
17
Attach the Rear Stabilizer (3) to the Rear Frame
(2) with two M8 x 70mm Button Bolts (25), two
M8 Washers (34), and two M8 Nylon Locknuts
(31).
25
2
3
31
34
34
Tighten the M8 Nylon Locknuts (31) used in
steps 1 and 2.
25
17
5
3. Attach the Seat Frame (5) inside of the Rear
Frame (2) with two M4 x 16mm Self-tapping
Screws (28) and two M4 Washers (23). Tighten
two M6 x 16mm Screws (38), two M6 Lock
Washers (39), and two M6 Washers (35) into the
two Frames.
3
7
26
39
Attach the Backrest Pivot Frame (6) to the Rear
Frame (2) with the M10 x 148mm Button Bolt (26)
and the M10 Nylon Locknut (30).
6
30
28
35
38
23
See the inset drawing. Attach the Long Pin (16)
to the Backrest Pivot Frame (6) with an M4 x
20mm Self-tapping Screw (27). Adjust the
Backrest Frame (not shown) to the upright posi-
tion and insert the Long Pin into the Backrest
Pivot Frame and Rear Frame (2).
38
6
2
5
35
39
2
16
27
4. Slide the three Support Spacers (21) and two
Middle Backrest Supports (10) onto the Backrest
Frame (7) as shown. Make sure that the round
holes in the Support Spacers are toward the
back.
4
21
10
21
10
21
Back
7
6
5. Attach the Top Backrest Support (9) and the
Handle (8) to the Backrest Frame (7) with two M6
x 27mm Flat Head Bolts (24), the Upper Bracket
(36), and two M6 Nylon Locknuts (32). Note:
Orient the Upper Bracket so that the top is
flush with the top of the Backrest Frame.
5
8
15
24
24
Tighten each Handle Grip (15) into the Handle
(8).
22
9
36
15
Remove the paper backing from the Backrest
Pad (22), and press the Backrest Pad onto the
Top Backrest Support (9). Note: The exercise
bench can be used after 15 minutes. Use the
exercise bench carefully for the first 24 hours
while the Backrest Pad adhesive sets com-
pletely.
32
7
6. Attach the Seat Support (13) to the Seat Frame
(5) with two M8 x 25mm Flat Head Bolts (33) and
two M8 Nylon Locknuts (31).
6
14
Remove the paper backing from the Seat Pad
(14), and press the Seat Pad onto the Seat
Support (13). Note: The exercise bench can be
used after 15 minutes. Use the exercise bench
carefully for the first 24 hours while the Seat
Pad adhesive sets completely.
33
5
13
31
7. Make sure that all parts are properly tightened
before you use the exercise bench.
7
ADJUSTMENTS
This section explains how to adjust the exercise bench. See the EXERCISE GUIDELINES on page 10 for impor-
tant information about how to get the most benefit from your exercise program. Refer to the accompanying exer-
cise guide to see the correct form for each exercise.
Make sure all parts are properly tightened each time the exercise bench is used. Replace any worn parts imme-
diately. The exercise bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use
solvents.
ADDING ADDITIONAL RESISTANCE
Resistance Rods
Additional resistance can be added to the exer-
cise bench. To purchase more resistance, call the
toll-free telephone number on the front cover of this
manual and ask for model number PFMC0144 (resist-
ance straps) or PFMC0344 (resistance rods).
Cotter Pin
Rod Pin
7
To attach the resistance straps to the exercise bench,
attach one strap to one of the hooks on the exercise
bench with a weight clip. Attach the other end of the
strap to a handle with a weight clip. Attach the other
strap in the same manner.
To attach the resistance rods to the exercise bench,
fully insert the resistance rods into the Backrest (7),
and secure them with the rod pin and the cotter pin.
Hooks
Weight Clip
Resistance Strap
Weight Clip
Handle
ADJUSTING THE BACKREST FRAME
8
To change the position of the Backrest Frame (7),
hold the Handle (8) with one hand and remove the
Long Pin (16) from the Backrest Pivot Frame (6).
Move the Backrest Frame to the desired position and
reinsert the Long Pin into the Pivot Frame and Rear
Frame (2).
7
WARNING:
Always make sure the
Long Pin (16) is fully inserted into the Backrest
Pivot Frame (6) and Rear Frame (2) before
using the exercise bench.
6
2
16
8
STORING THE EXERCISE BENCH
To store the exercise bench, first adjust the Backrest
Frame (7) to the most declined position (see
ADJUSTING THE BACKREST FRAME on page 8).
Then, lift on the seat and fold the Front Frame (1)
under the Rear Frame (2).
7
Seat
2
1
9
EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS
PERSONALIZING YOUR EXERCISE PROGRAM
MUSCLE BUILDING
Determining the exact length of time for each workout,
as well as the number of repetitions or sets completed,
To increase the size and strength of your muscles,
push them close to their maximum capacity. Your mus- is an individual matter. It is important to avoid overdo-
cles will continually adapt and grow as you progres-
sively increase the intensity of your exercise. You can
adjust the intensity level of an individual exercise in
two ways:
ing it during the first few months of your exercise pro-
gram. You should progress at your own pace and be
sensitive to your body’s signals. If you experience pain
or dizziness at any time while exercising, stop immedi-
ately and begin cooling down. Find out what is wrong
before continuing. Remember that adequate rest and a
proper diet are important factors in any exercise pro-
gram.
• By changing the amount of resistance used.
• By changing the number of repetitions or sets per-
formed. (A “repetition” is one complete cycle of an
exercise, such as one sit-up. A “set” is a series of
repetitions.)
WARMING UP
The proper amount of resistance for each exercise
depends upon the individual user. You must gauge
your limits and select the amount of resistance that is
Begin each workout with 5 to 10 minutes of stretching
and light exercise to warm up. Warming up prepares
right for you. Begin with 3 sets of 8 repetitions for each your body for more strenuous exercise by increasing
exercise you perform. Rest for 3 minutes after each
set. When you can complete 3 sets of 12 repetitions
without difficulty, increase the amount of resistance.
circulation, raising your body temperature and deliver-
ing more oxygen to your muscles.
WORKING OUT
TONING
You can tone your muscles by pushing them to a mod- Each workout should include 6 to 10 different exercis-
erate percentage of their capacity. Select a moderate
amount of resistance and increase the number of rep-
etitions in each set. Complete as many sets of 15 to
20 repetitions as possible without discomfort. Rest for
1 minute after each set. Work your muscles by com-
es. Select exercises for every major muscle group,
emphasizing areas that you want to develop most. To
give balance and variety to your workouts, vary the
exercises from session to session.
pleting more sets rather than by using high amounts of Schedule your workouts for the time of day when your
resistance.
energy level is the highest. Each workout should be
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.
WEIGHT LOSS
To lose weight, use a low amount of resistance and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.
EXERCISE FORM
Maintaining proper form is an essential part of an
effective exercise program. This requires moving
through the full range of motion for each exercise, and
CROSS TRAINING
Cross training is an efficient way to get a complete and moving only the appropriate parts of the body.
well-balanced fitness program. An example of a bal-
anced program is:
Exercising in an uncontrolled manner will leave you
feeling exhausted. On the exercise guide accompany-
ing this manual you will find photographs showing the
correct form for several exercises, and a list of the
muscles affected. See the muscle chart on the next
page to find the names of the muscles.
• Plan strength training workouts on Monday,
Wednesday, and Friday.
• Plan 20 to 30 minutes of aerobic exercise, such as
running on a treadmill or riding on an exercise cycle
or an elliptical exerciser, on Tuesday and Thursday.
• Rest from both strength training and aerobic exercise The repetitions in each set should be performed
for at least one full day each week to give your body
time to regenerate.
smoothly and without pausing. The exertion stage of
each repetition should last about half as long as the
return stage. Proper breathing is important. Exhale
during the exertion stage of each repetition and inhale
The combination of strength training and aerobic exer-
cise will reshape and strengthen your body, plus devel- during the return stroke. Never hold your breath.
op your heart and lungs.
10
Rest for a short period of time after each set. The
ideal resting periods are:
slowly as you stretch and do not bounce. Ease into
each stretch gradually and go only as far as you can
without strain. Stretching at the end of each workout
is an effective way to increase flexibility.
• Rest for three minutes after each set for a muscle
building workout.
• Rest for one minute after each set for a toning work-
out.
STAYING MOTIVATED
• Rest for 30 seconds after each set for a weight loss
workout.
For motivation, keep a record of each workout. List the
date, the exercises performed, the resistance used,
and the numbers of sets and repetitions completed.
Record your weight and key body measurements at
the end of every month. Remember, the key to achiev-
ing the greatest results is to make exercise a regular
and enjoyable part of your everyday life.
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.
COOLING DOWN
End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move
MUSCLE CHART
O
A. Sternomastoid (neck)
A
B. Pectoralis Major (chest)
P
C. Biceps (front of arm)
L
Q
B
D. Obliques (waist)
E. Brachioradials (forearm)
R
S
F. Hip Flexors (upper thigh)
G. Abductor (outer thigh)
C
D
H. Quadriceps (front of thigh)
I. Sartorius (front of thigh)
J. Tibialis Anterior (front of calf)
K. Soleus (front of calf)
E
T
F
M
N
U
L. Anterior Deltoid (shoulder)
M. Rectus Abdominus (stomach)
N. Adductor (inner thigh)
G
H
I
V
O. Trapezius (upper back)
P. Rhomboideus (shoulder)
Q. Posterior Deltoid (mid back)
R. Triceps (back of arm)
W
X
J
K
S. Latissimus Dorsi (mid back)
T. Spinae Erectors (lower back)
U. Gluteus Medius (hip)
V. Gluteus Maximus (buttocks)
W. Hamstring (back of leg)
X. Gastrocnemius (back of calf)
11
PART IDENTIFICATION CHART—Model No. PFBE1144.0
R0306A
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST in the center of this manual. Important: Some parts may have
been pre-assembled for shipping purposes. If a part is not in the parts bag, check to see if it has been
pre-attached.
M4 Washer (23)
M6 Nylon Locknut (32)
M8 Nylon Locknut (31)
M8 x 70mm Button Bolt (25)
M6 Lock Washer (39)
M6 Washer (35)
M6 x 27mm Flat Head Bolt (24)
M10 Nylon Locknut (30)
M8 x 25mm Flat Head Bolt (33)
M6 x 16mm Screw (38)
M4 x 16mm Self-
tapping Screw (28)
M4 x 20mm Self-tapping
Screw (27)
M8 Washer (34)
M10 x 148mm Button Bolt (26)
1
8
PART LIST—Model No. PFBE1144.0
R0306A
Key No. Qty.
Description
Key No. Qty.
Description
1
2
1
1
1
1
1
1
1
1
1
2
3
1
1
1
2
1
4
2
1
1
3
4
Front Frame
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
#
2
2
4
1
1
2
1
2
9
2
2
4
2
1
1
2
2
2
1
1
1
M4 Washer
Rear Frame
M6 x 27mm Flat Head Bolt
M8 x 70mm Button Bolt
M10 x 148mm Button Bolt
M4 x 20mm Self-tapping Screw
M4 x 16mm Self-tapping Screw
M10 x 98mm Button Bolt
M10 Nylon Locknut
M8 Nylon Locknut
M6 Nylon Locknut
M8 x 25mm Flat Head Bolt
M8 Washer
3
Rear Stabilizer
4
Front Stabilizer
Seat Frame
5
6
Backrest Pivot Frame
Backrest Frame
Handle
7
8
9
Top Backrest Support
Middle Backrest Support
M8 x 45mm Chamfer Head Bolt
Bottom Backrest Support
Seat Support
10
11
12
13
14
15
16
17
18
19
20
21
22
M6 Washer
Seat Pad
Upper Bracket
Handle Grip
Lower Bracket
Long Pin
M6 x 16mm Screw
M6 Lock Washer
Stabilizer Endcap
25mm Round Bushing
136mm Nylon Plate
Backrest Plate
Handle Extension
User’s Manual
#
Hex Key
Support Spacer
Backrest Pad
#
DVD
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of the user’s manual for information about ordering replacement parts.
EXPLODED DRAWING—Model No. PFBE1144.0
R0306A
15
40
8
22
9
24
24
22
40
21
10
15
22
21
36
32
10
16
27
21
7
22
19
20
6
11
31
31
37
12
26
30
14
17
33
13
38
39
28
23
3
31
18
35
25
34
34
17
2
18
35
39
5
25
29
31
38
30
25
1
17
31
25
4
17
34
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro-
vide the following information:
• the MODEL NUMBER of the product (PFBE1144.0)
• the NAME of the product (PROFORM COREMASTER exercise bench)
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING in
the center of this manual)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and mate-
rial, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This
warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing
or repairing, at ICON's option, the product through one of its authorized service centers. All repairs for which
warranty claims are made must be pre-authorized by ICON. If the product is shipped to a service center,
freight charges to and from the service center will be the customer’s responsibility. For in-home service, the
customer will be responsible for a minimal trip charge. This warranty does not extend to any product or dam-
age to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or
repairs not provided by an ICON authorized service center; products used for commercial or rental purposes;
or products used as store display models. No other warranty beyond that specifically set forth above is author-
ized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection
with the use or performance of the product or damages with respect to any economic loss, loss of property,
loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other consequential
damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or conse-
quential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of mer-
chantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein.
Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation
may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 218005 R0306A
Printed in China © 2006 ICON IP, Inc.
|